LEMFÖRDER 35664 02 Track Control Arm For Mercedes-Benz C-CLASS

LEMFÖRDER 35664 02 Track Control Arm – Precision Suspension Component for Mercedes‑Benz C‑Class

The LEMFÖRDER 35664 02 Track Control Arm is a high‑performance suspension part engineered specifically for the front right side of the Mercedes‑Benz C‑Class (W203) and its related models, including the CLK, SLC, SLK, and S203 variants. Designed to replace worn or damaged control arms, this component restores optimal handling, ride comfort, and structural integrity.

Key Features

• Exact Fitment: Engineered for the front right track arm of the C‑Class lineup (2000‑2007), ensuring seamless integration with existing suspension geometry.
• Premium Material: Constructed from high‑strength alloy steel, treated with a durable anti‑corrosion coating to withstand harsh road conditions and prolonged use.
• Precision Machining: Tight tolerances guarantee accurate alignment of wheel camber, caster, and toe settings, preserving the vehicle’s original handling characteristics.
• Robust Joint Design: Features a reinforced pivot point with a hardened bush or ball joint (depending on model), providing long‑lasting articulation under load.
• Easy Installation: Designed for quick removal of the old arm and straightforward attachment to the existing mounting points, reducing labor time and cost.

Compatibility Overview

The part is specifically tailored for the following Mercedes‑Benz models:

For all listed models, the LEMFÖRDER 35664 02 matches the original factory specifications for length, mounting flange geometry, and bolt pattern.

Technical Specifications

Installation Guide

1. Preparation: Raise the vehicle securely on jack stands and remove the front right wheel.
2. Remove Old Arm: Detach the existing control arm by loosening the mounting bolts. Carefully disconnect any attached sway bar links or tie rods if necessary.
3. Position New Arm: Align the LEMFÖRDER 35664 02 with the vehicle’s suspension geometry, ensuring that the pivot point sits correctly on the steering knuckle and the mounting flange aligns with the frame.
4. Secure Bolts: Tighten all bolts to the manufacturer’s torque specifications (typically 70–90 Nm for the main arm bolt). Use a calibrated torque wrench for accuracy.
5. Reattach Accessories: Reconnect any sway bar links, tie rods, or other suspension components that were removed during disassembly.
6. Final Checks: Verify wheel alignment settings (camber, caster, toe) and perform a short test drive to confirm smooth operation.

Benefits of Choosing the LEMFÖRDER 35664 02

• Restored Handling: By maintaining precise suspension geometry, the vehicle regains its original steering feel and cornering stability.
• Durability: The alloy steel construction resists fatigue and corrosion better than many aftermarket alternatives.
• Cost‑Effective Replacement: Offers a reliable substitute for OEM parts without compromising performance.
• Reduced Maintenance: A well‑aligned control arm reduces wear on tires, steering components, and other suspension elements.

Care & Maintenance Tips

To prolong the life of your LEMFÖRDER 35664 02 Track Control Arm, follow these simple guidelines:

• Inspect the arm and pivot joint every 10,000 miles for signs of wear or damage.
• Keep the mounting surfaces clean; remove dirt and rust before reinstallation.
• Avoid over‑torquing bolts during maintenance to prevent stripping or cracking.
• If you notice any unusual noises (clunking, squeaking) while driving, have the suspension inspected promptly.

Conclusion

The LEMFÖRDER 35664 02 Track Control Arm delivers a blend of precision engineering, robust construction, and straightforward installation. Whether you’re restoring an older Mercedes‑Benz C‑Class to its former glory or replacing a worn component in a CLK, SLC, SLK, or S203 model, this part ensures that your vehicle’s suspension remains reliable, safe, and true to the manufacturer’s design.