LEMFÖRDER 37918 01 Engine Mounting For Citroen JUMPY VAN 2007-2016 Right And Other Vehicles

LEMFÖRDER 37918 01 Engine Mounting

The LEMFÖRDER 37918 01 Engine Mounting is a precision‑engineered component designed to secure the engine of a vehicle in place while providing vibration isolation and load distribution. This mounting system is specifically engineered for the Citroën JUMPY VAN models produced between 2007 and 2016, but its versatile design allows it to be used on a wide range of other vehicles including Fiat Scudo, Peugeot, and various other European vans.

Key Functional Characteristics

• High‑strength construction: Made from durable alloy steel that resists fatigue under continuous engine operation.
• Vibration damping: Integrated elastomeric pads absorb engine vibrations, reducing noise and protecting vehicle components.
• Load distribution: The mounting geometry spreads the engine’s weight evenly across the chassis, preventing localized stress points.
• Easy installation: Pre‑drilled holes and standardized dimensions align with existing mounting brackets for a quick fit.

Compatibility Overview

The LEMFÖRDER 37918 01 is engineered to fit the following vehicle families:

• CITROËN JUMPY VAN (2007‑2016) – Right side mounting.
• FIAT SCUDO – Models with chassis codes 270, 272 and variants up to 2016.
• PEUGEOT – Various van and light commercial models sharing the same engine bay layout.
• Other European vans that share a similar engine mounting architecture.

Its design accommodates both left‑hand drive and right‑hand drive configurations, making it suitable for markets across Europe, Asia, and the Americas.

Material Composition & Manufacturing Process

The mounting plate is fabricated from high‑grade alloy steel (AISI 4340), known for its excellent tensile strength and resistance to corrosion. The surface undergoes a phosphating treatment followed by a protective powder coating, ensuring long‑term durability even in harsh operating environments.

The elastomeric pads are made from high‑performance nitrile rubber (NBR), chosen for its ability to maintain elasticity over a wide temperature range and resist oil exposure. These pads are bonded using a thermosetting adhesive that guarantees long‑lasting adhesion without compromising vibration isolation.

Installation Procedure

1. Preparation: Clean the mounting area on the chassis and remove any old fasteners or debris. Verify that the engine bay is free of obstructions.
2. Positioning: Align the LEMFÖRDER 37918 01 with the pre‑drilled holes in the chassis. Ensure that the mounting plate sits flush against the chassis surface.
3. Fastening: Insert the provided bolts through the mounting plate and into the chassis. Tighten to the manufacturer’s specified torque using a calibrated torque wrench.
4. Verification: Inspect the alignment of the engine relative to the mounting plate. Confirm that there is no excessive play or misalignment.
5. Final Check: After installation, run a short test drive to ensure that vibrations are within acceptable limits and that the engine remains securely positioned.

Performance Benefits

• Reduced Engine Vibration: The elastomeric pads dampen high‑frequency oscillations, improving ride comfort and reducing wear on suspension components.
• Enhanced Structural Integrity: By distributing engine loads evenly, the mounting system minimizes stress concentrations that could lead to chassis fatigue.
• Longevity: The corrosion‑resistant materials and protective coatings extend the service life of the mounting assembly even in corrosive environments such as coastal regions or areas with heavy road salt usage.

Maintenance Guidelines

Although the LEMFÖRDER 37918 01 is designed for long‑term use, routine inspections are recommended:

• Check bolt torque every 10,000 km or after any major impact event.
• Inspect elastomeric pads for signs of cracking, hardening, or oil contamination. Replace if necessary.
• Clean the mounting surface periodically to prevent buildup of dirt and debris that could affect vibration isolation.

Applications Beyond Citroën JUMPY VAN

The versatility of the LEMFÖRDER 37918 01 Engine Mounting makes it an ideal choice for:

• Commercial vans requiring robust engine support.
• Fleet vehicles where durability and low maintenance are critical.
• Aftermarket modifications where a reliable mounting solution is needed to accommodate upgraded engines or powertrains.

Conclusion

The LEMFÖRDER 37918 01 Engine Mounting delivers exceptional performance, durability, and ease of installation for a wide range of vehicles. Its high‑quality materials, vibration‑damping design, and proven compatibility make it the preferred choice for professionals seeking reliable engine support in both new installations and retrofits.

Frequently Asked Questions

• Is this mounting system compatible with left‑hand drive vehicles? Yes, the design accommodates both right‑hand and left‑hand configurations.
• Can it be used with engines of different displacement? The mounting plate is dimensionally consistent across models; however, verify engine bay clearance before installation.
• What is the expected lifespan under normal operating conditions? Typically 150,000 km or more, depending on driving environment and maintenance practices.