LEMFORDER 33358 01 TIE ROD END

Product Overview

The LEMFORDER 33358 01 Tie Rod End is a high‑performance steering component engineered for precise handling and durability in front‑wheel drive vehicles. Designed with advanced metallurgy and precision machining, this tie rod end delivers reliable steering geometry while resisting fatigue under continuous road loads.

Key Features

• Material Composition: High‑strength alloy steel with a hardened surface finish to resist wear and corrosion.
• Thread Specification: M10x1.25, ensuring secure attachment to steering knuckles and compatibility with standard fasteners.
• Load Capacity: Rated for high torsional loads typical of modern front‑wheel drive platforms.
• Design Geometry: Optimized curvature and offset to maintain consistent steering angles across suspension travel.
• Compatibility: Specifically engineered for the KIA Rio II (JB) 2005‑2011, Hyundai Accent 3, and other front‑wheel drive models with similar steering linkages.
• Manufacturing Precision: CNC machining ensures tight tolerances, reducing play and enhancing steering feel.

Technical Specifications

Installation Guidelines

Installing the LEMFORDER 33358 01 Tie Rod End requires careful attention to alignment and torque specifications. Follow these steps for optimal performance:

1. Preparation: Clean all mating surfaces with a solvent to remove grease, oil, or debris.
2. Alignment Check: Verify that the steering knuckle is properly positioned relative to the wheel hub. Misalignment can cause premature wear.
3. Thread Engagement: Insert the tie rod end into the steering knuckle using a torque wrench. Tighten to the manufacturer’s specified torque (typically 80–100 Nm for M10x1.25).
4. Sealing: Apply a high‑temperature sealant or thread locker if recommended by the vehicle manufacturer.
5. Final Inspection: Check for any play in the steering wheel and ensure that the tie rod end rotates smoothly without binding.

Maintenance & Longevity

The LEMFORDER 33358 01 Tie Rod End is designed to require minimal maintenance. However, periodic inspections are recommended:

• Visual Inspection: Look for signs of cracking, excessive wear, or corrosion on the outer surface.
• Play Check: Test the steering wheel for any looseness that may indicate bearing wear.
• Lubrication: If the vehicle’s design includes a grease fitting, lubricate according to the manufacturer’s schedule.

Performance Benefits

Choosing the LEMFORDER 33358 01 Tie Rod End offers several advantages for drivers and mechanics alike:

• Enhanced Steering Precision: The precise geometry reduces steering effort and improves vehicle responsiveness.
• Durability Under Stress: High‑strength alloy steel resists fatigue, extending the component’s service life even under aggressive driving conditions.
• Consistent Handling: By maintaining accurate steering angles, the tie rod end contributes to stable cornering and reduced tire wear.
• Compatibility Assurance: Engineered for specific models ensures seamless integration without aftermarket modifications.

Common Applications

This tie rod end is frequently used in automotive repair shops, performance tuning setups, and fleet maintenance programs where reliability and quick replacement are critical. Its compatibility with the KIA Rio II (JB) 2005‑2011 and Hyundai Accent 3 makes it a go‑to part for technicians servicing these platforms.

Conclusion

The LEMFORDER 33358 01 Tie Rod End exemplifies engineering excellence in steering components. With its robust construction, precise machining, and proven compatibility with popular front‑wheel drive models, it delivers reliable performance that meets the demands of everyday driving and spirited road use alike.