9.13 EUR
Lemforder 3361701 Steering Boot Kit
Inner diameter 1 [mm]: 13,5Inner diameter 2 [mm]: 44,5Length [mm]: 166Material: Thermoplast
Stores where to buy this product
Lemforder 3361701 Steering Boot Kit
The Lemforder 3361701 Steering Boot Kit is a high‑performance, OEM‑grade replacement for the steering rack boots on a wide range of Renault and Nissan models. Designed to protect the steering system from dust, water, road salt, and other contaminants, this kit restores the original sealing integrity that can be lost over time due to wear or accidental damage.
Key Features
- Exact OEM Fit: The boot material and dimensions match the original specifications for Renault Clio III, Nissan Micra, and other front‑axle models. This ensures a seamless fit without the need for additional modifications.
- Durable Thermoplastic Construction: Made from high‑grade thermoplastic, the boots resist cracking, UV degradation, and temperature extremes, guaranteeing long‑term performance even in harsh climates.
- Dual‑Side Coverage: Each kit includes a left and right boot, providing full protection for both sides of the steering rack. This is essential for maintaining proper fluid levels and preventing leaks.
- Easy Installation: The boots feature pre‑cut openings that align with the steering shaft and mounting points, allowing for quick installation without specialized tools or extensive labor.
- Improved Seal Integrity: By restoring a tight seal around the steering rack, the kit helps prevent fluid loss, reduces noise from air leaks, and protects against corrosive road salts.
Compatibility Overview
The Lemforder 3361701 Steering Boot Kit is engineered for front‑axle steering systems on a variety of vehicles. Below is an overview of the most common models that benefit from this replacement part:
| Vehicle Brand | Model Series | Applicable Years |
|---|---|---|
| Renault | Clio III, Clio Grandtour, Modus, Grand Modus | 2002‑2014 (various trims) |
| Nissan | Micra, Micra III, Micra C+C, Micra CR0 | 2003‑2015 (various trims) |
| Other OEMs | Various front‑axle models with similar steering rack geometry | Check specific part number compatibility |
Installation Guide
While the kit is designed for straightforward installation, following a systematic approach ensures optimal results:
- Preparation: Park the vehicle on a level surface and engage the parking brake. Disconnect the battery to avoid accidental steering lock.
- Remove Old Boots: Carefully detach the existing boots from the steering rack by sliding them off the shaft. Use a flathead screwdriver or a plastic pry tool to prevent damage to the boot material.
- Clean the Surface: Wipe the steering shaft and mounting area with a clean rag to remove dirt, rust, or old sealant residue.
- Position New Boots: Align the left boot with the left side of the steering shaft and slide it into place. Repeat for the right boot. Ensure that the boots sit flush against the shaft without gaps.
- Secure Boot Edges: Some models may require a small amount of silicone sealant at the boot edges to enhance sealing. Apply sparingly if recommended by the manufacturer.
- Re‑check Alignment: Verify that both boots are correctly seated and that no part of the steering shaft is exposed.
- Reconnect Battery & Test: Reconnect the battery, start the engine, and observe for any fluid leaks or abnormal noises. A properly installed boot kit should eliminate air hissing and maintain fluid levels.
Benefits of Replacement
- Extended Steering System Life: By preventing contaminants from entering the steering rack, the boots reduce wear on bearings and seals.
- Improved Driving Comfort: A sealed system eliminates wind noise and reduces vibration transmitted to the cabin.
- Cost‑Effective Maintenance: Replacing worn boots is far cheaper than repairing or replacing damaged steering rack components.
- Enhanced Safety: Maintaining proper fluid levels ensures that power steering functions correctly, especially under high load conditions.
Quality Assurance
The Lemforder 3361701 Steering Boot Kit is manufactured in accordance with strict quality control standards. Each boot undergoes dimensional verification and material testing to guarantee:
- Consistent thickness and flexibility.
- Resistance to abrasion, salt spray, and UV exposure.
- Compatibility with the OEM steering rack geometry.
Maintenance Tips
Even after installing new boots, regular checks can prolong their effectiveness:
- Inspect for cracks or tears every 12 months.
- Reapply a thin layer of silicone sealant if the boot edges show signs of wear.
- Avoid using harsh chemicals that could degrade thermoplastic material.
Conclusion
The Lemforder 3361701 Steering Boot Kit delivers reliable, OEM‑grade protection for the steering rack on a range of Renault and Nissan vehicles. Its durable construction, precise fit, and straightforward installation make it an essential component for maintaining steering system integrity, ensuring safe handling, and extending vehicle longevity.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | P for renault Front lemfÖrder Bellows steering rack boot P for nissan Steering for nissan renault |
| Identifiers | |
| Brand | ![]() Lemforder is a German automotive parts manufacturer that produces suspension components, steering systems, and other related parts. The company has a long history of producing high-quality parts and has a reputation for innovation and quality. Lemforder parts are used by a number of different automakers, including Audi, BMW, Mercedes-Benz, and Porsche. |
| MPN | Lemfrder 3361701 |
| Model | Lemfrder 3361701 |
| ID | 7035906 |
| Dimensions / Weight | |
| Key Features | |

