LEMFÖRDER 35562 01 Track Control Arm For Peugeot 3008 MPV

Product Overview

The LEMFÖRDER 35562 01 Track Control Arm is a high‑performance suspension component designed specifically for the Peugeot 3008 MPV. This track control arm, also known as a wishbone or control arm, plays a critical role in maintaining wheel alignment, ensuring optimal handling and ride comfort.

Key Functionalities

• Precise Wheel Alignment: The arm’s geometry is engineered to keep the wheel within the correct camber, caster, and toe angles throughout suspension travel.
• Enhanced Handling: By providing a stable pivot point, the control arm reduces unwanted wheel movement during cornering, improving steering response.
• Durable Construction: Made from high‑strength alloy steel, the component resists fatigue and corrosion under harsh driving conditions.
• Easy Installation: Designed to fit the original mounting points on the Peugeot 3008, it requires no additional modifications.

Technical Specifications

Installation Guide

The following steps outline a typical installation procedure for the LEMFÖRDER 35562 01 Track Control Arm. Always consult the vehicle’s service manual for torque specifications and safety precautions.

1. Preparation: Raise the vehicle and secure it on jack stands. Remove the wheel to access the suspension.
2. Remove Old Arm: Loosen and remove the existing control arm bolts. Carefully detach the arm from the steering knuckle and mounting bracket.
3. Align New Arm: Position the new arm in place, ensuring that the bushings and mounting points align correctly.
4. Secure Bolts: Tighten the bolts to the manufacturer’s specified torque using a calibrated torque wrench.
5. Recheck Alignment: After installation, perform a wheel alignment check to confirm proper geometry.
6. Reassemble: Reinstall the wheel, lower the vehicle, and conduct a test drive to verify smooth operation.

Performance Benefits

• Improved Stability: The arm’s robust design reduces body roll during aggressive driving.
• Longer Component Life: The alloy steel construction and protective coating extend the service life compared to standard steel arms.
• Consistent Ride Quality: By maintaining proper wheel angles, the control arm helps preserve a comfortable ride over uneven road surfaces.

Compatibility with Other Models

While the LEMFÖRDER 35562 01 is tailored for the Peugeot 3008 MPV, its design shares similarities with components used in other vehicles such as Citroën C4, DS4, and Peugeot 308. However, cross‑compatibility should be verified against specific vehicle specifications before installation.

Maintenance Tips

• Regular Inspection: Check for signs of wear or damage on the bushings and mounting points during routine maintenance.
• Lubrication: Apply a high‑temperature grease to the pivot points to reduce friction and prevent seizing.
• Avoid Overloading: Do not exceed the specified load capacity, as this can compromise structural integrity.

Conclusion

The LEMFÖRDER 35562 01 Track Control Arm delivers reliable performance, durability, and precise wheel control for the Peugeot 3008 MPV. Its engineered design ensures that drivers experience enhanced handling, stability, and comfort across a wide range of driving conditions.