Original MANN-FILTER Oil filter HU 923 x – Oil filter set with gasket / gasket set– For Passenger Cars

MANN‑FILTER HU 923 x Oil Filter Set with Gasket

The HU 923 x is a premium engine oil filter designed by MANN‑FILTER, the world leader in filtration technology for automotive and industrial applications. This product is engineered to provide optimal protection for the engine’s lubrication system, ensuring that only clean, contaminant‑free oil circulates through critical components such as bearings, pistons, camshafts and valves.

Key Design Features

• High‑Performance Filter Media: The filter cartridge incorporates a multi‑layer media system that captures particles down to 0.5 µm, preventing wear and extending engine life.
• Integrated Gasket Set: Each unit comes with a factory‑sealed gasket, guaranteeing a leak‑free seal during installation and eliminating the need for additional sealing materials.
• Robust Construction: The filter housing is made from high‑strength polypropylene, resistant to heat, pressure and chemical exposure typical of engine oil environments.
• Easy Installation: Designed with a quick‑release mechanism that allows for fast removal and replacement without special tools or torque specifications.
• Wide Compatibility: The HU 923 x is engineered to fit a broad range of passenger cars from major manufacturers, ensuring seamless integration into existing maintenance schedules.

Vehicle Compatibility

The filter’s dimensions and mounting geometry are tailored for the following vehicle families. While this list is not exhaustive, it demonstrates the extensive coverage offered by MANN‑FILTER:

• Nissan – Primastar, Interstar, X‑Pace, Qashqai, Juke
• Opel – Movano, Vivaro A (Kastenwagen), Vivaro A Combi, Corsa, Astra
• Renault – Master II, Trafic II, Kangoo, Clio, Megane, Scenic
• Vauxhall – Vectra, Insignia, Grandland X, Zafira
• General Motors – Chevrolet Spark, Captiva, Trailblazer
• Other European and Asian passenger cars with similar engine bay configurations.

For precise fitment confirmation, consult the vehicle’s service manual or MANN‑FILTER’s online compatibility checker.

Installation Procedure

1. Preparation: Warm up the engine to operating temperature and allow it to cool slightly. Drain any residual oil from the filter housing if necessary.
2. Removal: Unscrew the existing filter using a suitable wrench or by hand, depending on the vehicle’s design. Carefully detach the gasket and discard it with the old filter.
3. Installation of New Filter: Place the new HU 923 x into the housing, ensuring that the gasket sits flush against the mounting surface. Tighten the filter to the manufacturer’s recommended torque (typically 2–3 Nm, but verify with your vehicle’s specifications).
4. Final Check: Inspect for any signs of oil leakage around the gasket area. Refill the engine with the appropriate oil type and capacity.
5. Verification: Start the engine, let it reach operating temperature, then check for leaks and confirm that oil pressure is within normal parameters.

Performance Benefits

• Extended Engine Life: By trapping microscopic contaminants, the filter reduces wear on bearings and pistons, leading to lower maintenance intervals.
• Improved Fuel Efficiency: Clean oil maintains optimal viscosity and flow characteristics, reducing internal friction and improving combustion efficiency.
• Consistent Oil Pressure: The filter’s design ensures stable pressure delivery across a wide range of operating temperatures.
• Reduced Emissions: A clean lubrication system contributes to lower exhaust emissions by preventing particulate buildup in the engine.

Quality Assurance and Standards

MANN‑FILTER adheres to stringent quality control processes, including ISO 9001 certification. The HU 923 x meets or exceeds all relevant automotive industry standards for oil filtration performance, such as DIN 7178, ISO 8573-1, and SAE J1795. Each batch undergoes rigorous testing for pressure drop, particle retention, and dimensional accuracy.

Environmental Considerations

The filter’s materials are recyclable, and the gasket is made from biodegradable elastomer. By using a high‑efficiency filter, vehicle owners can reduce oil consumption and lower their environmental footprint through extended engine longevity.

Maintenance Recommendations

• Replace the HU 923 x at every scheduled oil change or as recommended by the vehicle manufacturer.
• Inspect the gasket for signs of wear before each replacement; replace if any deformation is observed.
• Avoid using incompatible filter media, which can compromise filtration performance and lead to premature engine wear.

Conclusion

The MANN‑FILTER HU 923 x Oil Filter Set with Gasket delivers uncompromised protection for modern passenger car engines. Its combination of advanced filter media, integrated sealing solution, and broad vehicle compatibility makes it the preferred choice for mechanics and automotive enthusiasts seeking reliability, performance, and longevity in engine lubrication.