Original MANN-FILTER Oil filter W 67/2 – For Passenger Cars and Utility Vehicles

Product Overview

The Original MANN‑FILTER Oil filter W 67/2 is a high‑performance, screw‑on oil filter designed for passenger cars and utility vehicles. It features a robust construction that ensures reliable filtration of engine oil, protecting the engine from contaminants and extending its service life.

Key Technical Features

• Thread Size: 3/4-16 UNF – compatible with most modern automotive engines.
• Filter Type: Screw‑on (Anschraubfilter) with a built‑in return valve to prevent oil backflow during pressure spikes.
• Material Composition: Premium cellulose and synthetic media that capture particles as small as 5 µm, while maintaining low resistance to flow.
• Seal Design: Dual O‑ring seal system guarantees leak‑free operation even under high temperatures.
• Compatibility: Suitable for a wide range of models including Nissan, Opel, Suzuki, Chevrolet, Daihatsu, and many others across various vehicle classes.
• Installation: Straightforward screw‑on installation; no special tools required beyond a standard wrench.

Performance Benefits

The filter’s advanced media structure provides excellent particle retention, reducing wear on critical engine components such as pistons, bearings, and camshafts. By maintaining cleaner oil, the filter helps:

• Improve fuel efficiency by ensuring optimal oil viscosity.
• Reduce engine noise through consistent lubrication.
• Extend service intervals by preserving oil quality for longer periods.
• Protect emission control systems by preventing particulate buildup that could affect catalytic converters and oxygen sensors.

Installation Guide

1. Warm the engine to operating temperature to allow oil to flow freely.
2. Locate the existing oil filter housing; remove the old filter using a filter wrench if necessary.
3. Clean the mounting surface of any debris or old gasket material.
4. Apply a thin layer of fresh oil to the new filter’s rubber seal.
5. Screw the MANN‑FILTER W 67/2 onto the housing by hand until snug, then give an additional quarter turn with a wrench for final tightening.
6. Check for leaks around the seal after starting the engine and letting it idle for a few minutes.

Maintenance Tips

• Replace the filter at every oil change or as recommended by the vehicle manufacturer.
• Avoid over-tightening, which can damage the seal; use a torque wrench set to the manufacturer’s specification if available.
• Inspect the filter housing for cracks or corrosion before installation.

Why Choose MANN‑FILTER?

MANN‑FILTER is renowned for its rigorous quality control, ensuring each filter meets stringent European and international standards. The W 67/2 model combines durability, performance, and ease of use, making it a trusted choice for both professional mechanics and DIY enthusiasts.

Applications Across Vehicle Types

The versatility of the W 67/2 filter allows it to be used in:

• Passenger cars – from compact hatchbacks to mid‑size sedans.
• Utility vehicles – including vans, pickups, and light commercial trucks.
• Specialty models – such as the Suzuki Swift IV FZ/NZ, Nissan Pixo, and Chevrolet Aveo/Kalos.

Conclusion

The Original MANN‑FILTER Oil filter W 67/2 delivers reliable, high‑quality filtration for a broad spectrum of vehicles. Its robust construction, precise fitment, and proven performance make it an essential component for maintaining engine health and ensuring long‑term vehicle reliability.