Original MANN-FILTER Oil filter W 68/3 – For Passenger Cars and Utility Vehicles

Original MANN‑FILTER Oil Filter W 68/3 – Engine Protection for Passenger Cars and Utility Vehicles

The MANN‑FILTER Oil Filter W 68/3 is a high‑performance, OEM‑quality filter designed to keep your engine’s oil clean and free from contaminants. It is engineered specifically for passenger cars and light utility vehicles, providing reliable protection across a wide range of models.

Key Features & Benefits

• Advanced Filtration Technology: Utilises a multi‑layer media system that captures particles as small as 0.5 µm, ensuring optimal oil cleanliness and extended engine life.
• Durable Construction: Made from high‑strength polypropylene housing with reinforced sealing rings to resist cracking and maintain integrity under high pressure.
• Anti‑Return Valve: Integrated valve prevents backflow of contaminated oil, protecting the filter media and maintaining consistent filtration performance.
• Easy Installation: Screw‑on design (3/4‑16 UNF) with a 66 mm outer diameter and 75 mm height allows quick replacement without special tools.
• Wide Compatibility: Certified for numerous vehicle families, including Citroën, Peugeot, Toyota, Daihatsu, Geely, GLEAGLE, Holden, Lexus, and many more.

Vehicle Compatibility Overview

The filter’s design accommodates a broad spectrum of engines. Below is a concise list of representative models that officially support the W 68/3:

For a complete cross‑reference list, consult the official MANN‑FILTER compatibility database or contact your local service center.

Installation Guide

1. Preparation: Warm up the engine to operating temperature. This reduces oil viscosity and eases filter removal.
2. Drainage (Optional): If you wish to replace the oil simultaneously, drain the old oil using a suitable container.
3. Remove Old Filter: Use an oil filter wrench or hand‑tighten if the housing is not overly tight. Be careful of residual oil.
4. Inspect Housing: Check for cracks or damage; replace if necessary to avoid leaks.
5. Install New Filter: Align the threaded end with the engine’s filter opening. Hand‑tighten until snug, then give an additional 1/4 turn. Do not overtighten.
6. Refill Oil (if drained): Add fresh oil to the recommended level and start the engine. Check for leaks around the filter seal.
7. Final Check: After a short drive, verify that the oil pressure gauge remains within normal range.

Performance & Longevity

The W 68/3’s multi‑layer media captures fine particles while maintaining low resistance to flow. This balance preserves engine torque and fuel efficiency. Typical service intervals for this filter align with OEM recommendations, usually every 10,000–15,000 km or annually, depending on driving conditions.

Why Choose MANN‑FILTER?

• Trusted Brand: MANN‑FILTER is a globally recognized name in automotive filtration, known for rigorous testing and quality control.
• OEM Compliance: The filter meets or exceeds original equipment specifications, ensuring seamless integration with your vehicle’s design.
• Environmental Responsibility: Made from recyclable materials and designed to reduce oil consumption through efficient filtration.
• Cost‑Effective Protection: By preventing contaminants from reaching critical engine components, the filter helps avoid costly repairs.

Maintenance Tips

• Always use a clean container when draining or refilling oil to prevent recontamination.
• Inspect the filter housing for cracks before each replacement; replace if damaged.
• Keep the engine bay free of debris that could settle on the filter during operation.
• Store spare filters in a dry, dust‑free environment to preserve media integrity.

Conclusion

The MANN‑FILTER Oil Filter W 68/3 delivers reliable, high‑quality filtration for a wide array of passenger cars and utility vehicles. Its robust construction, advanced media technology, and proven compatibility make it an essential component for maintaining engine health and performance.