Original MANN-FILTER Oil Filter W 718/2 – For Passenger Cars

MANN‑FILTER Original Oil Filter W 718/2

The Original MANN‑FILTER Oil Filter W 718/2 is a premium engine oil filter designed for passenger cars that demand the highest level of protection and performance. Developed by one of the world’s leading automotive filtration manufacturers, this filter delivers exceptional filtration efficiency while maintaining optimal flow characteristics.

Key Features

• High‑Performance Filtration: Utilises a multi‑layer media system that captures particles as small as 0.5 µm, ensuring the engine oil remains clean and free from contaminants that can cause wear.
• Anti‑Return Valve: Equipped with an integrated one‑way valve that prevents backflow of oil into the engine, protecting the filter media and maintaining consistent pressure.
• Durable Construction: Made from high‑quality polypropylene housing and reinforced with a metal gasket for leak‑free sealing under extreme operating conditions.
• Optimised Flow: Engineered to provide low resistance, preserving engine performance while delivering maximum protection.
• Easy Installation: Screw‑on design (3/4‑16 UNF) fits standard oil filter sockets, allowing quick and tool‑free replacement.

Compatibility

The W 718/2 filter is specifically engineered for a wide range of passenger vehicles. It is the factory‑recommended choice for:

• Alfa Romeo models such as the 75, 90, GT, RZ, SZ, and Giulia Spider.
• Fiat cars including the Punto, 124 Coupé, 145, 146, 155, 164, 168, Tempra, and Lancia Prisma.
• Lancia vehicles like the Innocenti series (75, 90, GT, RZ, SZ) and the 1750‑2000 Saloon.
• Citroën and Ford models that share the same filter specifications.

For commercial or light‑commercial vehicles, the filter is also suitable for:

• Ducato Kasten (290) and Ducato Pritsche/Fahrgestell (230).
• Punto Van (176L), Fiat Tipo, and other vans that use the same mounting geometry.

Installation Guide

1. Preparation: Warm up the engine to operating temperature. Drain the old oil filter carefully, allowing any remaining oil to flow into a drain pan.
2. Remove Old Filter: Use an oil filter wrench or hand if the filter is loose enough. Dispose of the used filter responsibly.
3. Inspect Mounting Surface: Clean the mounting area on the engine block to remove any debris or old gasket material.
4. Apply New Gasket: Place a new metal gasket (included) onto the filter housing, ensuring it sits flush with the mounting surface.
5. Screw On Filter: Hand‑tighten the new W 718/2 filter until snug. Finish with an additional half turn to guarantee a secure seal without over‑torquing.
6. Check for Leaks: Start the engine and observe the filter area for any signs of oil leakage. Tighten slightly if necessary.

Performance Benefits

• Extended Engine Life: By trapping contaminants, the filter reduces wear on bearings, pistons, and camshafts, leading to longer engine longevity.
• Improved Fuel Efficiency: Maintaining optimal oil viscosity and flow reduces friction losses, contributing to better fuel economy.
• Consistent Oil Pressure: The anti‑return valve ensures steady pressure throughout the lubrication system, preventing dips that could compromise engine protection.
• Reliability Under Stress: Designed for high temperatures and pressures typical of passenger car engines, it remains stable during rapid acceleration or heavy load conditions.

Quality Assurance

The MANN‑FILTER W 718/2 undergoes rigorous testing in accordance with ISO 9001 standards. Each filter is inspected for dimensional accuracy, gasket integrity, and flow characteristics before leaving the factory. The brand’s reputation for reliability stems from decades of engineering expertise and continuous product improvement.

Maintenance Tips

• Replace the oil filter at every scheduled oil change to maintain optimal protection.
• Avoid using aftermarket filters that do not meet the same specifications, as they may compromise engine performance.
• Store spare filters in a dry environment to prevent moisture absorption, which can affect gasket sealing.

Conclusion

The Original MANN‑FILTER Oil Filter W 718/2 represents the pinnacle of engine oil filtration technology for passenger cars. Its combination of high‑efficiency media, robust construction, and precise fitment ensures that engines run cleaner, smoother, and longer. Whether you are servicing a classic Alfa Romeo or a modern Fiat, this filter delivers the protection your vehicle deserves.