Price from
118.82 EUR
118.82 EUR
Metzger 0892002 EGR Valve
A precise EGR valve designed for Opel models, featuring an integrated seal and electric actuation for reliable exhaust gas recirculation, enhancing engine efficiency and reducing emissions
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
Trodo EU
Metzger 0892002 EGR Valve
The Metzger 0892002 EGR Valve is a precision‑engineered component designed to regulate the flow of exhaust gases back into the intake manifold. This process, known as Exhaust Gas Recirculation (EGR), plays a critical role in reducing nitrogen oxide emissions and improving overall engine efficiency.
Key Functional Characteristics
- EGR Flow Control: The valve provides accurate modulation of exhaust gas volume, ensuring optimal combustion temperature and minimizing NOx formation.
- Electrical Actuation: Equipped with an integrated electric actuator, the valve responds swiftly to engine control unit (ECU) signals, allowing for real‑time adjustments during varying operating conditions.
- Durable Sealing System: A high‑performance gasket and sealing material guarantee leak‑free operation even under extreme temperatures and pressures typical of modern internal combustion engines.
- Compact Design: Its streamlined geometry facilitates installation in tight engine bay spaces without compromising airflow or accessibility for maintenance.
The Metzger 0892002 EGR Valve is engineered to fit a wide range of Opel models, including but not limited to:
- Opel Astra (Corsa, Tigra, Vectra)
- Opel Corsa B 3/5‑door variants
- Opel Tigra Coupe and other compact family cars
- Various generation codes such as S93, J96, T92, CC, and F08
Its universal fitment is achieved through standardized mounting brackets and connector interfaces that align with the original equipment manufacturer (OEM) specifications.
Proper installation of the Metzger 0892002 EGR Valve is essential for optimal performance:
- Preparation: Clean all mating surfaces to remove oil, dirt, and old gasket material.
- Alignment: Position the valve so that the actuator shaft aligns precisely with the ECU connector.
- Tightening Sequence: Use a torque wrench to secure mounting bolts in a crisscross pattern, following the manufacturer’s specified torque values.
- Electrical Connection: Verify that the wiring harness is correctly seated and that all pins are free from corrosion.
- Functional Test: After installation, perform an ECU diagnostic to confirm correct valve operation and absence of fault codes related to EGR.
Routine checks help maintain the reliability of the EGR system:
- Visual Inspection: Look for signs of wear, corrosion, or debris accumulation on the valve body and actuator.
- Seal Integrity: Inspect gasket surfaces for cracks or deformation; replace if any compromise is detected.
- Electrical Signal Verification: Use a scan tool to monitor voltage levels supplied to the actuator during engine operation.
- Functional Test: Conduct an EGR flow test to ensure that the valve opens and closes within the specified time frames.
The integration of the Metzger 0892002 EGR Valve into a vehicle’s exhaust system delivers several tangible advantages:
- Emission Reduction: By recirculating a controlled amount of exhaust gases, the valve lowers combustion temperatures, directly decreasing NOx emissions.
- Fuel Efficiency: Optimized combustion conditions can lead to modest gains in fuel economy by reducing excess heat loss.
- Engine Longevity: Lower operating temperatures reduce thermal stress on engine components, potentially extending service life.
Parameter Specification Model Code 0892002 Actuation Type Electric Material Aluminum alloy housing, stainless steel actuator Seal Material High‑temperature elastomer Operating Temperature Range -40 °C to 250 °C Compatibility Opel Astra, Corsa, Tigra, Vectra (various generations) Mounting Interface Standard OEM bracket system
The Metzger 0892002 EGR Valve exemplifies engineering excellence in emission control technology. Its robust construction, precise electrical actuation, and broad compatibility make it an indispensable component for vehicles seeking to meet stringent environmental standards while maintaining performance integrity.
Proper installation of the Metzger 0892002 EGR Valve is essential for optimal performance:
- Preparation: Clean all mating surfaces to remove oil, dirt, and old gasket material.
- Alignment: Position the valve so that the actuator shaft aligns precisely with the ECU connector.
- Tightening Sequence: Use a torque wrench to secure mounting bolts in a crisscross pattern, following the manufacturer’s specified torque values.
- Electrical Connection: Verify that the wiring harness is correctly seated and that all pins are free from corrosion.
- Functional Test: After installation, perform an ECU diagnostic to confirm correct valve operation and absence of fault codes related to EGR.
Routine checks help maintain the reliability of the EGR system:
- Visual Inspection: Look for signs of wear, corrosion, or debris accumulation on the valve body and actuator.
- Seal Integrity: Inspect gasket surfaces for cracks or deformation; replace if any compromise is detected.
- Electrical Signal Verification: Use a scan tool to monitor voltage levels supplied to the actuator during engine operation.
- Functional Test: Conduct an EGR flow test to ensure that the valve opens and closes within the specified time frames.
The integration of the Metzger 0892002 EGR Valve into a vehicle’s exhaust system delivers several tangible advantages:
- Emission Reduction: By recirculating a controlled amount of exhaust gases, the valve lowers combustion temperatures, directly decreasing NOx emissions.
- Fuel Efficiency: Optimized combustion conditions can lead to modest gains in fuel economy by reducing excess heat loss.
- Engine Longevity: Lower operating temperatures reduce thermal stress on engine components, potentially extending service life.
Parameter Specification Model Code 0892002 Actuation Type Electric Material Aluminum alloy housing, stainless steel actuator Seal Material High‑temperature elastomer Operating Temperature Range -40 °C to 250 °C Compatibility Opel Astra, Corsa, Tigra, Vectra (various generations) Mounting Interface Standard OEM bracket system
The Metzger 0892002 EGR Valve exemplifies engineering excellence in emission control technology. Its robust construction, precise electrical actuation, and broad compatibility make it an indispensable component for vehicles seeking to meet stringent environmental standards while maintaining performance integrity.
The integration of the Metzger 0892002 EGR Valve into a vehicle’s exhaust system delivers several tangible advantages:
- Emission Reduction: By recirculating a controlled amount of exhaust gases, the valve lowers combustion temperatures, directly decreasing NOx emissions.
- Fuel Efficiency: Optimized combustion conditions can lead to modest gains in fuel economy by reducing excess heat loss.
- Engine Longevity: Lower operating temperatures reduce thermal stress on engine components, potentially extending service life.
Parameter Specification Model Code 0892002 Actuation Type Electric Material Aluminum alloy housing, stainless steel actuator Seal Material High‑temperature elastomer Operating Temperature Range -40 °C to 250 °C Compatibility Opel Astra, Corsa, Tigra, Vectra (various generations) Mounting Interface Standard OEM bracket system
The Metzger 0892002 EGR Valve exemplifies engineering excellence in emission control technology. Its robust construction, precise electrical actuation, and broad compatibility make it an indispensable component for vehicles seeking to meet stringent environmental standards while maintaining performance integrity.
| Parameter | Specification |
|---|---|
| Model Code | 0892002 |
| Actuation Type | Electric |
| Material | Aluminum alloy housing, stainless steel actuator |
| Seal Material | High‑temperature elastomer |
| Operating Temperature Range | -40 °C to 250 °C |
| Compatibility | Opel Astra, Corsa, Tigra, Vectra (various generations) |
| Mounting Interface | Standard OEM bracket system |
The Metzger 0892002 EGR Valve exemplifies engineering excellence in emission control technology. Its robust construction, precise electrical actuation, and broad compatibility make it an indispensable component for vehicles seeking to meet stringent environmental standards while maintaining performance integrity.
The Metzger 0892002 EGR Valve exemplifies engineering excellence in emission control technology. Its robust construction, precise electrical actuation, and broad compatibility make it an indispensable component for vehicles seeking to meet stringent environmental standards while maintaining performance integrity.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 141.39 EUR  120.80 EUR  160.08 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Metzger is a German brand that produces high-quality meat products. The company is known for its sausages, ham, and bacon, and its products are sold in grocery stores and supermarkets around the world. Metzger's products are made with fresh, natural ingredients and are free of additives and preservatives. |
| MPN | Metzger 892002 |
| Model | Metzger 892002 |
| ID | 6972766 |
| Dimensions / Weight | |
| Key Features | |
Related articles
Manufacturer's item number: 214.500 - Brand New - Quality product
The AJUSA Seal for the EGR valve, model number 01176600, is a high-quality replacement part that ensures optimal performance and longevity of your vehicle's exhaust gas recirculation system.
Manufacturer's item number: 214.500 - Brand New - Quality product
The AJUSA Seal for the EGR valve, model number 01176600, is a high-quality replacement part that ensures optimal performance and longevity of your vehicle's exhaust gas recirculation system.
METZGER's 0892083 EGR valve is a high-quality, reliable part that helps regulate the exhaust gas recirculation system in your vehicle. Its precise design ensures optimal engine performance and reduced emissions for a smoother ride.
Manufacturer's item number: 214.500 - Brand New - Quality product