7.90 EUR
Metzger 0912026 Switch, reverse light
Colour: Black Number of Poles: 2Transmission Type: Manual Transmission
Stores where to buy this product
Trodo EU
Metzger 0912026 Switch – Reverse Light
The Metzger 0912026 Switch is a precision‑engineered component designed to activate the reverse light system in a wide range of vehicles. It serves as the critical link between the vehicle’s gear selector and the rear illumination, ensuring that drivers receive unmistakable visual feedback when engaging reverse.
Key Functionalities
- Gear‑Selector Integration: The switch is mechanically coupled to the manual transmission’s gear lever. When the driver shifts into reverse, a cam or linkage triggers the switch, completing an electrical circuit that powers the rear lights.
- Electrical Contact Design: Featuring a robust two‑pole contact arrangement, the switch delivers reliable current flow even under harsh automotive conditions such as vibration, temperature extremes, and moisture exposure.
- Signal Isolation: The internal construction isolates the high‑current path from the low‑voltage control circuitry, protecting sensitive electronics while maintaining a clean signal to the reverse light assembly.
Compatibility Profile
The 0912026 model is engineered for use in several major automotive brands. Its dimensions and mounting interface match the original equipment specifications of:
- Audi A3, Audi TT, Audi Passat (B3/B4)
- Seat Ibiza, Seat Leon, Seat Cordoba
- Skoda Octavia, Skoda Superb, Skoda Rapid
- Volkswagen Golf IV, Golf V, Golf VI, Golf VII, Golf VIII
- Volkswagen Passat, Volkswagen Polo, Volkswagen Jetta
Because the switch is a direct replacement for the factory unit, it fits seamlessly into existing wiring harnesses and mounting brackets without requiring additional adapters or modifications.
Material & Build Quality
- Housing: Made from high‑strength thermoplastic that resists impact, heat, and chemical degradation. The black finish offers a discreet aesthetic that blends with interior trim.
- Contacts: Constructed from silver‑plated copper to reduce resistance and prevent corrosion over time.
- Sealing: Gasketed edges provide water‑tight sealing, ensuring the switch remains operational in wet or dusty environments.
Installation Overview
Installing the Metzger 0912026 Switch is a straightforward process that follows these essential steps:
- Remove the Original Unit: Disconnect the battery, remove any trim panels covering the gear lever area, and unscrew the existing switch from its mounting bracket.
- Disconnect Wiring: Carefully detach the electrical connector, noting the polarity and pin configuration to avoid mis‑connection.
- Mount the New Switch: Align the new unit with the mounting holes, secure it using the supplied screws, and reattach any trim panels.
- Reconnect Wiring: Plug the connector back into its socket, ensuring a snug fit. Reconnect the battery.
- Test Functionality: Shift the gear lever into reverse; the rear lights should illuminate instantly and remain on until the gear is shifted out of reverse.
Performance Benefits
- Reliability: The switch’s durable construction guarantees consistent operation over thousands of shift cycles, reducing maintenance needs.
- Safety Enhancement: By providing a dependable reverse light signal, the component contributes to safer driving conditions, especially in low‑visibility situations.
- Compatibility Assurance: As an OEM‑grade part, it preserves the vehicle’s original electrical integrity and avoids potential issues such as flickering lights or intermittent failures.
Maintenance Tips
Although the Metzger 0912026 Switch is designed for long‑term use, periodic checks can help maintain optimal performance:
- Inspect the wiring harness for signs of wear or corrosion; replace damaged sections promptly.
- Verify that the gear lever linkage remains free from debris and moves smoothly; clean as necessary.
- Check the switch contacts for any buildup of oxidation; a gentle cleaning with isopropyl alcohol can restore conductivity if needed.
Conclusion
The Metzger 0912026 Switch – Reverse Light exemplifies engineering precision and reliability. Its seamless fit across multiple vehicle platforms, combined with robust material selection and straightforward installation, makes it an essential component for maintaining safe and compliant reverse lighting systems.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 9.40 EUR  5.80 EUR  8.88 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Metzger is a German brand that produces high-quality meat products. The company is known for its sausages, ham, and bacon, and its products are sold in grocery stores and supermarkets around the world. Metzger's products are made with fresh, natural ingredients and are free of additives and preservatives. |
| MPN | Metzger 912026 |
| Model | Metzger 912026 |
| ID | 6973382 |
| Dimensions / Weight | |
| Key Features | |
Related articles
