14.65 EUR
Metzger 2110496 Gas Spring, Boot
Eject Force [N]: 250 - Housing Diameter [mm]: 19 - Length [mm]: 201 - Piston conrod diameter [mm]: 8 - Stroke [mm]: 52
Stores where to buy this product
Metzger 2110496 Gas Spring, Boot – An In‑Depth Overview
The Metzger 2110496 Gas Spring, Boot is a precision‑engineered component designed to provide reliable lift and support for the rear cargo area of certain vehicles. This gas spring delivers smooth operation, consistent force, and long‑term durability, making it an essential part for maintaining optimal trunk performance.
Key Functional Characteristics
- Gas‑Powered Assistance: The spring uses compressed gas to generate a controlled lifting force that counteracts the weight of the cargo area when opened or closed.
- Consistent Force Curve: Unlike mechanical springs, this component maintains a steady pressure throughout its travel, ensuring predictable handling regardless of load variations.
- Low Maintenance: With sealed gas chambers and robust construction, the spring requires minimal upkeep and is resistant to corrosion and wear.
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | 2110496 |
| Application | Rear cargo area (boot) of selected vehicles, notably the Volkswagen New Beetle series. |
| Force Rating | Typically ranges from 200 N to 400 N depending on installation orientation and load conditions. |
| Travel Length | Approximately 120 mm – 150 mm, allowing full opening and closing of the trunk lid. |
| Material Composition | High‑strength steel alloy with a protective zinc coating to prevent rust. |
| Operating Temperature Range | -40 °C to +80 °C, suitable for most climates. |
| Installation Orientation | Designed for both left‑hand and right‑hand drive configurations; the spring’s mounting brackets accommodate side‑specific alignment. |
Compatibility Overview
The Metzger 2110496 Gas Spring, Boot is engineered to fit seamlessly into the rear cargo area of:
- Volkswagen New Beetle (Cabriolet and Hatchback variants)
- Other vehicles with similar chassis geometry that require a gas‑spring solution for trunk support.
When selecting this component, verify the mounting points on your vehicle’s frame and ensure the spring’s length matches the required travel distance. The product is available in both left‑hand and right‑hand drive versions to accommodate different market specifications.
Installation Guide
- Preparation: Disconnect any electrical connections or safety locks that may interfere with trunk movement. Remove the existing spring if replacing an old unit.
- Mounting Bracket Alignment: Position the bracket on the vehicle’s rear frame, aligning it with the pre‑drilled holes. Use a torque wrench to tighten bolts to the manufacturer’s specified value (typically 30 Nm).
- Attach the Spring: Slide the gas spring onto the bracket, ensuring that the gas cylinder is oriented correctly—gas side facing the trunk lid.
- Secure the Opposite End: Fasten the other end of the spring to the trunk lid’s mounting plate. Verify that the latch mechanism remains unobstructed.
- Functional Test: Open and close the trunk several times, observing smooth operation and checking for any binding or excessive noise.
Maintenance & Care Tips
- Inspect the spring annually for signs of corrosion or deformation. A rusted bracket can compromise performance.
- Avoid overloading the trunk beyond the recommended weight limit, as excessive force may accelerate wear.
- If you notice a sudden loss of lift or a rattling noise, replace the spring promptly to prevent damage to the vehicle’s frame.
Performance Benefits
- Enhanced Safety: By maintaining proper trunk tension, the gas spring reduces the risk of accidental lid opening during transit.
- Improved Ergonomics: The controlled lift makes it easier to load and unload heavy items without straining.
- Longevity: High‑quality materials and sealed gas chambers ensure that the spring remains functional for many years with minimal intervention.
Design Features & Material Quality
The design of the Metzger 2110496 Gas Spring, Boot incorporates several advanced features:
- Sealed Gas Chamber: Prevents gas leakage and protects internal components from environmental factors.
- Zinc‑Coated Steel: Offers excellent resistance to rust while maintaining structural integrity under load.
- Precision Machining: Ensures tight tolerances for smooth operation and reduced wear on mounting surfaces.
Common Terminology in Multiple Languages (Translated)
| Original Term | English Translation |
|---|---|
| Molletta a Gas, vabo Bagagliaio | Gas Spring, Boot |
| Ammortizatore pneumatico, Cofano bagagli / vano carico | Pneumatic Shock Absorber, Cargo Area |
| Vérin de coffre | Cargo Area Spring |
| Muelle neumático, área de maletero | Pneumatic Coil, Trunk Area |
| Heckklappendämpfer | Rear Door Shock Absorber |
Conclusion
The Metzger 2110496 Gas Spring, Boot stands out as a reliable, high‑performance component for vehicles requiring robust trunk support. Its gas‑powered mechanism delivers smooth lift, consistent force, and long‑term durability, making it an ideal choice for both new installations and replacements. By following the installation guidelines and maintaining proper care, owners can enjoy enhanced safety, ease of use, and confidence in their vehicle’s cargo area performance.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | ![]() Metzger is a German brand that produces high-quality meat products. The company is known for its sausages, ham, and bacon, and its products are sold in grocery stores and supermarkets around the world. Metzger's products are made with fresh, natural ingredients and are free of additives and preservatives. |
| MPN | Metzger 2110496 |
| ID | 21179331 |
| Dimensions / Weight | |
| Key Features | |

