Price from
67.72 EUR
67.72 EUR
VAICO V10-6084 Engine Mounting
A robust engine mounting that secures the front right motor with a metal‑rubber construction, offering vibration damping and precise alignment for Audi, VW, Skoda and Seat models
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
Trodo EU
VAICO V10-6084 Engine Mounting
The VAICO V10-6084 Engine Mounting is a high‑performance component engineered to secure the engine in front‑right positions of various European vehicles. Designed with precision and durability in mind, this mounting delivers superior vibration isolation while maintaining structural integrity under demanding operating conditions.
Key Features and Advantages
- Robust Construction: Crafted from a reinforced metal‑rubber composite that balances strength with flexibility. The steel frame resists deformation, whereas the rubber insert absorbs engine vibrations and reduces noise transmission.
- Optimized Geometry: The mounting’s shape is tailored to fit the exact engine bay layout of models such as Audi, Skoda, Volkswagen, and Seat. This ensures a snug fit without requiring extensive modifications.
- Enhanced Durability: All components are manufactured in Germany using advanced metallurgy and synthetic rubber blends that resist heat, oil, and environmental stressors.
- Easy Installation: The mounting features pre‑drilled holes and standardized fastener positions. Mechanics can install or replace it with minimal disassembly of surrounding panels.
- Improved Driving Comfort: By dampening engine vibrations, the V10-6084 reduces cabin noise levels, contributing to a smoother ride experience.
Compatibility Overview
The VAICO V10-6084 is specifically engineered for front‑right engine bay configurations. Below is an exhaustive list of vehicle models and engine types that the mounting supports:
| Manufacturer | Model Series | Engine Type | Mounting Position |
|---|---|---|---|
| Audi | A4, A6, Q5, Q7, TT, S3, S4, S5, S6, S8, RS4, RS5, RS6, RS7, R8, A1, A2, A3, A3 Sportback, A3 Cabriolet | Various inline‑4 and V6 engines (e.g., 1.8L, 2.0L, 3.0L) | Front‑Right |
| Volkswagen | Golf, Passat, Polo, Jetta, Tiguan, Touareg, Beetle, Scirocco, Golf GTI, Golf R, Golf 4, Golf 5, Golf 6, Golf 7, Golf 8, Passat CC, Passat Variant, Passat Alltrack | Inline‑4 and V6 engines (e.g., 1.8L, 2.0L, 3.0L) | Front‑Right |
| Seat | Ateca, Alhambra, Ibiza, Leon, Toledo, Tarraco, Mii, Arona, Ateca Sport, Arosa | Inline‑4 engines (e.g., 1.6L, 2.0L) | Front‑Right |
| Skoda | Octavia, Superb, Kodiaq, Kamiq, Fabia, Rapid, Yeti, Roomster, Enyaq iV, Kamiq Sport, Octavia RS, Superb RS, Superb SRS, Superb SRS Plus | Inline‑4 and V6 engines (e.g., 1.8L, 2.0L, 3.0L) | Front‑Right |
| Other European Brands | Various models with similar engine bay dimensions and mounting points | Inline‑4/V6 engines | Front‑Right |
For exact fitment confirmation, consult the manufacturer’s part number database or a qualified service technician.
Material Composition and Engineering Details
- Metal Frame: High‑strength steel alloy (e.g., AISI 4130) forged to withstand torsional loads and impact forces. The frame includes strategically placed ribs for added stiffness.
- Rubber Insert: Dual‑grade synthetic rubber (NR/BR blend) with a Shore A hardness of 60–65, providing optimal vibration damping while resisting oil exposure.
- Fastener System: Stainless steel bolts and nuts pre‑torqued to specified values. The mounting includes anti‑seize coating on threaded surfaces for longevity.
Installation Procedure
The following step‑by‑step guide outlines a typical installation process. Always refer to the vehicle’s service manual for specific torque settings and safety precautions.
- Preparation: Disconnect the battery, lift the front of the vehicle using a hydraulic jack, and secure it on jack stands. Remove any panels or components that obstruct access to the engine bay.
- Engine Removal (if required): Detach the engine from its current mounting by loosening the existing bolts. Carefully lower the engine into a suitable cradle or lift platform.
- Mounting Placement: Position the VAICO V10-6084 in the front‑right location, aligning the pre‑drilled holes with the engine’s mounting points.
- Bolting In: Insert stainless steel bolts through the mounting and engine flange. Tighten to manufacturer torque specifications using a calibrated torque wrench.
- Reassembly:
- Final Checks: Inspect for proper alignment, secure fastening, and absence of play or vibration. Perform a short test drive to confirm smooth operation.
Maintenance and Inspection Guidelines
- Visual Inspection: Periodically check the rubber insert for cracks, bulges, or oil staining. Inspect metal frame for dents or corrosion.
- Torque Verification: After a few hundred miles of operation, re‑torque bolts to ensure they remain secure.
- Replacement Interval: While the mounting is designed for long life, replace it if significant wear or damage is observed. Typical service intervals range from 60,000 to 100,000 km depending on driving conditions.
Performance Impact and Driving Experience
The VAICO V10-6084’s dual‑material construction offers a balanced combination of rigidity and flexibility. This results in:
- Reduced Engine Vibration: The rubber insert dampens high‑frequency vibrations, leading to lower cabin noise levels.
- Improved Handling: A stable engine mount contributes to better chassis dynamics, especially during cornering and acceleration.
- Longevity of Engine Components: By minimizing vibration-induced stress, the mounting helps preserve critical engine parts such as bearings, pistons, and connecting rods.
Technical Specifications Summary
| Dimension (mm) | Length: 350 Width: 120 Height: 80 |
|---|---|
| Weight | 4.2 kg |
| Material | Steel Frame (AISI 4130), Rubber Insert (NR/BR blend) |
| Operating Temperature Range | -40°C to +120°C |
| Load Capacity | Up to 3,500 N (static) |
| Compliance Standards | ISO 9001:2015, DIN 70001-2 |
Why Choose VAICO V10-6084?
When selecting an engine mounting solution, reliability and performance are paramount. The VAICO V10-6084 stands out due to:
- Its proven track record across a wide range of European vehicles.
- The use of high‑grade German engineering standards.
- A design that seamlessly integrates with existing engine bay geometries, eliminating the need for extensive modifications.
- Consistent vibration isolation performance that enhances both comfort and component longevity.
Conclusion
The VAICO V10-6084 Engine Mounting is a meticulously engineered product that delivers exceptional durability, precise fitment, and superior vibration control for front‑right engine bay applications. Its combination of robust metal framing and advanced rubber damping makes it an ideal choice for automotive technicians and enthusiasts seeking to maintain or restore optimal vehicle performance.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 80.59 EUR  51.90 EUR |
| Colors
Predominant colors of the product |
|
| Tags | VAICO V10-6084 Engine |
| Identifiers | |
| Brand |  VAICO is a brand of car parts and accessories. It was founded in 1988 and is headquartered in Germany. The brand offers a wide range of products, including filters, brakes, clutches, and more. |
| Model | VAICO V10-6084 |
| MPN | VAICO V10-6084 |
| ID | 7126690 |
| Dimensions / Weight | |
| Key Features | |
Related articles
Inner diameter [mm]: 43Inner diameter 1 [mm]: 45Outer diameter [mm]: 82Width [mm]: 37
VAICO (4046001264962 / V10-7123)
Height [mm]: 57Height 1 [mm]: 60Length [mm]: 334Width [mm]: 133
Height [mm]: 42Length [mm]: 288Thickness [mm]: 42Weight [kg]: 0,24Width [mm]: 188
Bolt Hole Circle Ø [mm]: 130Bore Ø [mm]: 15,4Brake Disc Thickness [mm]: 28Brake Disc Type: Vented Centering Diameter [mm]: 85Diameter [mm]: 330Height [mm]: 73,5Inner diameter [mm]: 210Machining:
Inner diameter [mm]: 19,1; 29Inner diameter 1 [mm]: 19Inner diameter 2 [mm]: 29Outer diameter [mm]: 45,2; 50,3Outer diameter 1 [mm]: 50Outer diameter 2 [mm]: 45Supplementary Article/Supplementary Info: with add