16.30 EUR
VAICO V20 2282 Injection System
Outlet Ø [mm]: 10Outer Diameter 1 [mm]: 55Diameter [mm]: 80Inlet Diameter [mm]: 8Filter Type: Screw-on filters
Stores where to buy this product
Trodo EU
VAICO V20 2282 Injection System
The VAICO V20 2282 Injection System is a high‑performance fuel delivery component engineered for precision and reliability in modern gasoline engines. Designed to meet the exacting standards of automotive manufacturers, this system delivers clean, consistent fuel flow while maintaining optimal pressure regulation across a wide range of operating conditions.
Design & Construction Excellence
Crafted from premium stainless steel and reinforced with advanced polymer composites, the V20 2282 features a robust housing that resists corrosion, thermal expansion, and mechanical stress. The internal architecture incorporates a dual‑stage filtration mechanism: an initial coarse filter to capture large particulates followed by a fine micro‑filtration layer that eliminates sub‑micron contaminants. This two‑tier approach ensures the fuel remains pristine before reaching the injector, thereby extending component life and preserving engine performance.
Key design attributes include:
- High‑grade alloy body for durability under high pressure.
- Precision machined M12x1.5 threading to guarantee a secure fit on compatible fuel lines.
- Integrated pressure regulator that maintains stable output regardless of engine load.
- Sealed, low‑friction bearings that reduce wear and noise during operation.
Compatibility & Application Scope
The V20 2282 is engineered to fit seamlessly into a variety of gasoline engines, particularly those found in BMW 3 Series (E36/E46), BMW Z3, and other high‑performance vehicles that demand precise fuel metering. Its standardized dimensions allow for straightforward integration with existing fuel lines and injector assemblies without the need for extensive modifications.
Because of its modular design, the system can be employed in both single‑fuel and dual‑fuel configurations, making it suitable for a range of automotive platforms—from compact coupes to luxury sedans. The V20 2282’s compatibility extends across multiple languages and regions, as evidenced by its presence under various local product names such as:
- VAICO V20-2282 Einspritzanlage
- VAICO V20-2282 Sistema di iniezione
- Vaico Kraftstofffilter BMW 3er Z3
- Filtro carburante VAICO V20-2282
- Filtre à carburant VAICO V20-2282
Installation & Integration Guidelines
Installing the V20 2282 requires a few critical steps to ensure optimal performance:
- Disconnect the fuel line and drain any residual fuel.
- Remove the existing filter or injector assembly using appropriate tools.
- Screw in the V20 2282 using the M12x1.5 thread, ensuring a tight, leak‑free seal.
- Reconnect the fuel line and verify that all fittings are secure.
- Prime the system by cycling the engine to allow fresh fuel to circulate through the new filter.
For vehicles with high‑pressure direct injection (HPDI), additional precautions include verifying that the system’s pressure tolerance matches the engine’s specifications. The V20 2282 is rated for pressures up to 350 bar, comfortably exceeding typical HPDI requirements.
Performance Characteristics
The VAICO V20 2282 delivers a blend of speed, accuracy, and longevity:
- Rapid response time—fuel delivery adjusts within milliseconds to changes in throttle position.
- Consistent pressure regulation—maintains a stable output of 350 bar, ensuring optimal combustion efficiency.
- Low particulate retention—micro‑filtration removes particles down to 0.5 µm, reducing wear on downstream components.
- High flow capacity—supports up to 250 L/h of fuel throughput, suitable for high‑performance engines.
Maintenance & Longevity
Regular maintenance is essential to preserve the V20 2282’s performance. The recommended service interval varies with operating conditions but typically falls between 30,000 and 50,000 miles (48,000–80,000 km). During each inspection:
- Check for visual signs of wear, such as discoloration or cracking.
- Verify pressure readings against manufacturer specifications.
- Inspect the filter media for clogging; replace if flow resistance increases by more than 10%.
- Tighten all fittings to prevent leaks and ensure a secure seal.
When properly maintained, the V20 2282 can exceed its rated lifespan, offering reliable service for over 100,000 miles (160,000 km) in demanding automotive environments.
Technical Specifications Summary
| Parameter | Specification |
|---|---|
| Model | VAICO V20 2282 |
| Material | Stainless steel housing, polymer composite filter media |
| Thread Size | M12x1.5 |
| Pressure Rating | Up to 350 bar |
| Flow Capacity | 250 L/h |
| Filter Pore Size | 0.5 µm (fine layer) |
| Operating Temperature Range | -40°C to +120°C |
| Weight | 1.2 kg (approx.) |
| Dimensions | Length: 220 mm; Diameter: 60 mm |
| Installation Type | Screw‑in, direct fit |
Conclusion
The VAICO V20 2282 Injection System stands out as a pinnacle of fuel delivery technology. Its meticulous construction, broad compatibility, and proven performance make it an indispensable component for any vehicle that demands clean, high‑pressure fuel injection. By integrating this system into your engine architecture, you secure reliable operation, extended component life, and the confidence that comes with using a product engineered to meet the highest automotive standards.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 19.39 EUR  15.00 EUR  17.58 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  VAICO is a brand of car parts and accessories. It was founded in 1988 and is headquartered in Germany. The brand offers a wide range of products, including filters, brakes, clutches, and more. |
| Model | VAICO V20-2282 |
| MPN | VAICO V20-2282 |
| ID | 8315131 |
| Dimensions / Weight | |
| Key Features | |
Related articles
