VAICO V24-80006 Brake Disc

VAICO V24-80006 Brake Disc

The VAICO V24-80006 is a high‑performance front brake disc designed for a wide range of passenger cars and light commercial vehicles. It meets the stringent European ECE R90 safety standard, ensuring reliable stopping power under all driving conditions.

Key Technical Specifications

• Diameter: 257 mm (10.12 in)
• Thickness: 22 mm (0.87 in)
• Height: 40.5 mm (1.59 in)
• Ventilation: 98 mm perforated pattern for optimal heat dissipation
• Material: Premium cast iron with a reinforced steel backing plate
• Compliance: ECE R90 certified for European markets

Design and Performance Features

The disc’s ventilated design incorporates a series of evenly spaced holes that allow air to flow through the plate, reducing heat buildup during heavy braking. This feature is crucial for maintaining consistent brake performance on long descents or spirited driving.

A reinforced steel backing plate provides additional structural integrity, preventing warping and ensuring that the disc maintains its shape even under high thermal loads. The combination of cast iron and steel results in a durable component that resists cracking and wear over time.

Compatibility Overview

The VAICO V24-80006 is engineered to fit a broad spectrum of vehicles, including:

• Ford: Focus, Fiesta, Mondeo, and other models with front‑wheel drive.
• Fiat: 500 (3‑door), Bravo, Punto II, Panda, and similar compact cars.
• Peugeot: 206, 307, 308, 508, and other models with front‑wheel drive.
• Alfa Romeo: 145, 146, 155, and the classic Alfa Romeo 164.
• Citroën, Lancia, Vauxhall, and other European brands that use a 257 mm front disc.
• Additional compatibility with certain light commercial vehicles and SUVs that share the same front‑wheel drive architecture.

For precise fitment, consult your vehicle’s service manual or a qualified technician. The disc is available in both single and dual (two‑piece) configurations to accommodate different brake system designs.

Installation Guidelines

1. Remove the existing disc: Detach the caliper, slide out the old brake disc, and clean the hub surface with a solvent to remove grease or debris.
2. Inspect the hub: Check for any signs of damage or excessive wear. Replace if necessary before installing the new disc.
3. Mount the VAICO V24-80006: Slide the new disc onto the hub, ensuring that it sits flush against the bearing surface.
4. Tighten the mounting bolts: Use a torque wrench to achieve the manufacturer’s specified torque value (typically between 80–100 Nm for most models).
5. Reinstall the caliper: Position the caliper over the new disc, secure it with the appropriate bolts, and apply brake fluid as needed.
6. Bake‑in procedure: Perform a short drive to allow the brakes to reach operating temperature, then recheck all fasteners for proper torque.

Maintenance Tips

• Regularly inspect brake pads and rotors for wear. Replace pads when the remaining thickness is below 4 mm.
• Keep the disc surface clean; use a high‑pressure washer or specialized brake cleaner to remove oil, grease, or brake dust.
• Avoid driving with worn or damaged discs, as this can lead to reduced braking efficiency and potential safety hazards.

Why Choose VAICO V24-80006?

The VAICO V24-80006 offers a blend of durability, performance, and compliance that makes it an ideal choice for drivers who demand reliable stopping power. Its ECE R90 certification guarantees adherence to European safety standards, while the ventilated design ensures consistent braking under high‑temperature conditions.

Whether you’re upgrading a classic model or installing a new front brake system on a modern vehicle, the VAICO V24-80006 delivers proven performance and peace of mind.

Conclusion

The VAICO V24-80006 Brake Disc stands out as a premium component for front‑wheel drive vehicles across multiple brands. Its robust construction, heat‑management features, and broad compatibility make it a trusted choice among mechanics and automotive enthusiasts alike.