52.33 EUR
VAICO V50-0022 Track Control Arm
for OE number: 45 43 468Paired article numbers: V50-0021Part number of the recommended special tools: V99-1020Steering arm type: Control Arm
Stores where to buy this product
Trodo EU
VAICO V50-0022 Track Control Arm
The VAICO V50-0022 Track Control Arm is a precision-engineered suspension component designed to enhance the handling, stability, and ride comfort of vehicles that require a robust front‑axle control arm. This part is specifically engineered for models such as the Saab 9‑3 (including the Cabriolet variant) and other compatible platforms where a high‑performance track control arm is essential.
Key Functionalities
The primary role of the track control arm is to maintain the correct alignment between the wheel hub and the vehicle’s chassis. It achieves this by:
- Controlling lateral movement: Prevents excessive side‑to‑side motion during cornering, thereby improving steering precision.
- Managing camber changes: Adjusts wheel angle relative to the road surface as the suspension compresses or extends, which is critical for tire contact patch optimization.
- Absorbing vertical loads: Distributes forces generated by bumps and uneven terrain across a wider area of the chassis, reducing stress on other suspension components.
Material Composition and Durability
The V50-0022 is fabricated from high‑strength alloy steel that undergoes rigorous heat treatment processes. This ensures:
- Exceptional tensile strength: Capable of withstanding dynamic loads encountered during aggressive driving or off‑road use.
- Corrosion resistance: Protective coatings and surface treatments guard against rust, extending the component’s service life even in harsh climates.
- Precision machining: Tight tolerances guarantee a perfect fit with mating parts such as ball joints, bushings, and mounting brackets.
Design Features
The V50-0022 incorporates several design elements that set it apart from standard control arms:
- Optimized geometry: The arm’s shape is engineered to reduce unsprung mass while maintaining structural rigidity, which improves acceleration and braking performance.
- Integrated mounting points: Pre‑drilled holes and standardized bolt patterns simplify installation and ensure compatibility with OEM specifications.
- Low-profile construction: The slender profile reduces aerodynamic drag and allows for better clearance in tight engine bay spaces.
Compatibility Overview
The VAICO V50-0022 is specifically tailored for the following vehicle platforms, but it may also fit other models with similar suspension geometry:
- Saab 9‑3 (Y series): Front‑axle right side, lower track control arm.
- Saab 9‑3 Cabriolet: Designed to accommodate the unique body curvature and weight distribution of the convertible variant.
- Other Saab models with matching bolt patterns and mounting locations (consult a detailed fitment guide for confirmation).
Installation Guidelines
Installing the V50-0022 requires careful attention to alignment and torque specifications. The following steps provide a general framework:
- Preparation: Ensure the vehicle is securely lifted on jack stands, and all safety precautions are observed.
- Removal of old arm: Loosen and remove the existing track control arm using appropriate tools. Keep all hardware for reuse if it remains in good condition.
- Alignment check: Verify that the new arm’s mounting points align with the chassis and wheel hub. Adjust as necessary to avoid binding.
- Installation: Attach the V50-0022 using the supplied bolts, tightening them in a star pattern to ensure even distribution of clamping force.
- Torque application: Follow the manufacturer’s torque sequence (typically 80–90 Nm for the main mounting bolt) and use a calibrated torque wrench.
- Final checks: Inspect all fasteners, confirm proper wheel alignment, and perform a short test drive to ensure smooth operation.
Performance Benefits
When integrated into the suspension system, the VAICO V50-0022 delivers measurable improvements in driving dynamics:
- Enhanced steering feel: Reduced play and increased responsiveness during cornering.
- Improved tire contact: Consistent camber control maintains optimal tire‑road interaction, boosting grip.
- Reduced wear on adjacent components: By absorbing lateral forces, the arm lessens stress on ball joints and bushings, extending their lifespan.
Maintenance Tips
Although the V50-0022 is built for longevity, routine checks can preempt potential issues:
- Inspect for cracks or deformation: Periodically examine the arm for any signs of fatigue.
- Check fastener integrity: Ensure all bolts remain tight and free from corrosion.
- Lubricate bushings: If the suspension includes rubber or polyurethane bushings, apply a suitable lubricant to maintain smooth motion.
Conclusion
The VAICO V50-0022 Track Control Arm exemplifies engineering excellence in automotive suspension design. Its high‑strength construction, precise geometry, and proven performance make it an ideal choice for drivers seeking reliable handling and durability on vehicles such as the Saab 9‑3 series. By integrating this component into your vehicle’s front‑axle system, you can expect a noticeable upgrade in steering precision, tire contact stability, and overall ride quality.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 62.27 EUR  52.39 EUR  53.58 EUR  84.40 EUR |
| Colors
Predominant colors of the product |
|
| Tags | VAICO V50-0022 Track |
| Identifiers | |
| Brand |  VAICO is a brand of car parts and accessories. It was founded in 1988 and is headquartered in Germany. The brand offers a wide range of products, including filters, brakes, clutches, and more. |
| Model | VAICO V50-0022 |
| MPN | VAICO V50-0022 |
| ID | 7137930 |
| Dimensions / Weight | |
| Key Features | |
Related articles
