141.50 EUR
VAICO V95-0006 Hydraulic Pump, steering system
Stores where to buy this product
VAICO V95-0006 Hydraulic Pump – Steering System
The VAICO V95-0006 Hydraulic Pump is a high‑performance component designed specifically for the steering systems of Volvo vehicles, including models such as the V70 I, XC70 I Cross Country, 850 Break, and their various derivatives. This pump delivers precise hydraulic pressure to the power‑steering unit, ensuring smooth, responsive handling and reducing driver fatigue even on long journeys.
Key Functional Characteristics
- Optimized Flow Rate: The V95-0006 provides a calibrated flow that matches the exact requirements of Volvo’s steering rack geometry, guaranteeing consistent assist across all operating speeds.
- Durable Construction: Built with high‑strength alloy housing and reinforced seals, the pump resists wear under continuous duty cycles typical in heavy‑duty or commercial applications.
- Compact Design: Its streamlined profile fits seamlessly into the limited engine bay space of compact and mid‑size Volvo models without necessitating chassis modifications.
- Low Noise Operation: Advanced internal baffling reduces cavitation, resulting in a quieter steering feel compared to older pump designs.
Compatibility Overview
The V95-0006 is engineered for direct fitment with the following Volvo platforms:
| Vehicle Series | Model Years |
|---|---|
| V70 I (850) | 1993‑1996, 1997‑2000 |
| C70 I Coupe | 1999‑2002 |
| S70 / V70 / XC70 | Various 1995‑2004 configurations |
| 850 Break | 1993‑1996 |
Because the pump is a direct OEM replacement, it aligns with Volvo’s original specifications for pressure, flow, and mounting geometry. This guarantees that the steering system retains its factory‑calibrated performance.
Installation Highlights
- Removal of Existing Pump: Detach the old hydraulic pump by disconnecting the inlet/outlet hoses, removing the mounting bolts, and carefully extracting the unit from the engine bay.
- Preparation: Clean the mounting surface to eliminate debris. Inspect the steering rack for any signs of wear; replace if necessary to avoid future leaks.
- Mounting the V95-0006: Align the pump’s mounting flange with the engine block, secure with the supplied bolts, and torque to manufacturer specifications.
- Hose Connections: Attach the high‑pressure inlet hose from the engine oil supply and the low‑pressure outlet hose to the steering rack. Verify all connections are tight and free of leaks.
- System Bleeding: Follow Volvo’s bleeding procedure to purge air from the hydraulic circuit, ensuring optimal assist pressure.
Performance Benefits
- Enhanced Steering Precision: The pump’s calibrated flow delivers consistent assist torque, improving cornering stability and reducing steering effort at low speeds.
- Reduced Driver Fatigue: By maintaining steady hydraulic pressure, the V95-0006 lessens the physical strain on drivers during prolonged operation or in congested traffic.
- Reliability Under Stress: Its robust construction withstands high ambient temperatures and heavy load conditions typical of commercial fleets or off‑road use.
- Extended Service Life: Compared to older pump models, the V95-0006’s improved seal design extends maintenance intervals, lowering overall operating costs.
Maintenance Guidelines
Although the V95-0006 is engineered for longevity, routine checks ensure continued optimal performance:
- Oil Level Inspection: Verify that the engine oil remains within the recommended range; low oil can compromise pump lubrication.
- Seal Condition: Inspect inlet/outlet seals annually for signs of wear or cracking. Replace promptly to prevent leaks.
- Pressure Monitoring: Use a diagnostic tool to confirm that steering assist pressure stays within Volvo’s specified limits.
Technical Specifications Summary
| Parameter | Value |
|---|---|
| Flow Rate (L/min) | Approx. 12–15 (varies with engine speed) |
| Operating Pressure (bar) | Up to 8 bar |
| Mounting Type | Bolted flange |
| Material | High‑strength alloy with corrosion‑resistant coating |
| Seal Material | Advanced elastomer (e.g., Viton) |
Why Choose the VAICO V95-0006?
The VAICO V95-0006 Hydraulic Pump represents a blend of proven engineering and modern manufacturing precision. Its direct compatibility with Volvo’s steering architecture means that owners can restore or upgrade their vehicle’s power‑steering system without compromising safety or performance. Whether you are maintaining a fleet, restoring a classic model, or simply replacing a worn component, the V95-0006 delivers reliable assistance, smooth handling, and peace of mind for years to come.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | ![]() VAICO is a brand of car parts and accessories. It was founded in 1988 and is headquartered in Germany. The brand offers a wide range of products, including filters, brakes, clutches, and more. |
| Model | VAICO V95-0006 |
| MPN | VAICO V95-0006 |
| ID | 8741349 |
| Dimensions / Weight | |
| Key Features | |

