Van Wezel 3768918 Indicator

Overview

The Van Wezel 3768918 Indicator is a high‑performance side flasher designed for modern vehicles that demand reliable and eye‑catching signal lighting. This component delivers consistent illumination, ensuring drivers can communicate their intentions clearly on the road.

Key Attributes

• Model Number: 3768918
• Manufacturer: Van Wezel
• Application: Side flasher, blink light, direction indicator
• Color: White (standard)
• Mounting Type: Side‑mounted, front or rear placement compatible with most chassis designs

Technical Specifications

The Van Wezel 3768918 Indicator incorporates advanced LED technology to provide superior brightness and longevity. Below are the detailed technical parameters:

Electrical Characteristics

• Voltage: 12 V DC (standard automotive supply)
• Current Consumption: Approximately 0.5 A per unit during operation
• Power Output: 6 W peak, ensuring high visibility even in adverse weather conditions
• Operating Temperature Range: –40 °C to +85 °C, suitable for extreme climates

Optical Performance

• Luminous Flux: 200 lm (typical), providing a clear and unmistakable signal
• Beam Pattern: Wide‑angle distribution to cover the entire side of the vehicle
• Color Temperature: 6000 K, delivering a crisp white light that stands out against darker backgrounds

Mechanical Design

• Housing Material: High‑strength polycarbonate with heat‑shrinkable silicone sealant for weather resistance
• Dimensions: 70 mm × 30 mm × 15 mm (typical)
• Mounting Interface: Standard screw holes and bracket compatibility, enabling quick installation without extensive modifications
• Weight: 50 g per unit, minimizing additional load on the vehicle structure

Installation Guide

Installing the Van Wezel 3768918 Indicator is straightforward for technicians familiar with automotive lighting systems. The following steps outline a typical installation procedure:

Preparation

1. Disconnect the battery. This prevents accidental short circuits during wiring.
2. Remove existing side light assembly. Use appropriate tools to detach brackets and connectors.
3. Inspect mounting location. Ensure there are no obstructions and that the surface is clean.

Mounting

4. Align the indicator housing with the mounting bracket. Verify that all screw holes line up correctly.
5. Screw in place. Tighten securely but avoid over‑tightening to prevent damage.
6. Seal the edges. Apply silicone sealant if required for additional weatherproofing.

Wiring

7. Connect the positive lead (red) to the vehicle’s side‑flasher circuit. Use a suitable connector or soldered joint with heat shrink tubing.
8. Attach the negative lead (black) to the chassis ground. Ensure a solid, corrosion‑free connection.
9. Test the indicator. Reconnect the battery and activate the side‑flasher switch to confirm proper operation.

Final Checks

• Verify that the light emits evenly across its beam pattern.
• Check for any flickering or dimming, which may indicate a wiring issue.
• Ensure all seals remain intact after installation to maintain water resistance.

Compatibility and Vehicle Applications

The Van Wezel 3768918 Indicator is engineered for broad compatibility across various vehicle models, especially those requiring a side flasher or blink light. Common applications include:

• Front side lights on passenger cars.
• Rear side indicators on SUVs and vans.
• Supplementary lighting for commercial vehicles.

It is particularly well‑suited for models such as the Opel Vectra C (2002–2005) and similar chassis that demand a white, high‑intensity side flasher. The indicator’s modular design allows it to replace older incandescent or halogen units without extensive rework.

Features and Benefits

• High Visibility: The LED array delivers bright, consistent illumination, enhancing safety for both the driver and surrounding traffic.
• Low Power Consumption: Efficient operation reduces strain on the vehicle’s electrical system.
• Durability: Robust construction resists vibration, temperature extremes, and moisture ingress.
• Easy Installation: Standard mounting hardware and straightforward wiring simplify replacement or upgrade processes.
• Long Lifespan: LED technology typically exceeds 50,000 hours of operation, minimizing maintenance needs.

Maintenance Tips

To ensure optimal performance over time, follow these simple maintenance guidelines for the Van Wezel 3768918 Indicator:

1. Inspect the housing regularly. Look for cracks or signs of wear that could compromise weather resistance.
2. Clean the lens surface. Use a soft, non‑abrasive cloth and mild detergent to remove dirt and grime.
3. Check electrical connections. Tighten any loose screws and verify continuity in the wiring harness.
4. Replace seals if necessary. A deteriorated seal can allow moisture ingress, potentially damaging internal components.

Conclusion

The Van Wezel 3768918 Indicator stands out as a reliable, high‑performance side flasher that meets the demands of modern automotive lighting. Its combination of bright LED illumination, low power consumption, and durable construction makes it an ideal choice for vehicle owners seeking to upgrade or replace their existing side lights with a component that delivers both safety and longevity.