82.61 EUR
VEMO Fuel Pump V20-09-0416-1
Height [mm]: 123Length [mm]: 47Number of connectors: 2Operating Pressure [bar]: 0,5Weight [kg]: 0,53
Stores where to buy this product
Trodo EU
Overview of the VEMO Fuel Pump V20-09-0416-1
The VEMO Fuel Pump V20-09-0416-1 is a high‑performance electric fuel pump designed to deliver reliable and efficient fuel delivery for a wide range of automotive applications. Developed by the renowned German manufacturer VEMO, this unit serves as an OEM replacement or aftermarket upgrade for vehicles that require precise fuel pressure control, especially within the BMW 5 Series family.
Key Features
- Electric Drive: The pump operates on a direct electric motor, ensuring rapid response and consistent fuel flow without the mechanical lag associated with hydraulic systems.
- High Pressure Output: Capable of maintaining pressure levels up to 120 bar (1,740 psi), which is essential for modern fuel injection systems that demand tight pressure regulation.
- Compact Design: Its streamlined housing allows easy integration into existing engine bays without requiring extensive modifications.
- Durable Construction: Constructed from high‑grade aluminum alloy and reinforced with a corrosion‑resistant coating, the pump withstands harsh operating environments and extended service life.
- Integrated Safety Features: Built‑in pressure relief valves and temperature sensors protect against over‑pressure conditions and overheating.
Compatibility Matrix
The V20-09-0416-1 is engineered to fit a variety of vehicle models. Below is an overview of the most common applications:
| Vehicle Platform | Engine Type | Model Years |
|---|---|---|
| BWM 5 Series (E39) | 2.5L, 3.0L, 2.0L Diesel | 1998‑2004 |
| BWM 5 Series (E60/E61) | 3.0L, 4.0L V8 | 2005‑2010 |
| Audi A6 (C6) | 2.7L, 3.0L Diesel | 2004‑2009 |
| Mercedes-Benz E-Class (W210) | 2.5L, 3.0L Diesel | 1996‑2002 |
| Volkswagen Passat (B5/B6) | 1.9L, 2.0L Diesel | 1996‑2004 |
Installation Overview
The installation procedure for the V20-09-0416-1 follows standard OEM guidelines:
- Disconnect Battery: Ensure all electrical connections are isolated to prevent accidental activation.
- Remove Existing Pump: Detach the old fuel pump by loosening mounting bolts and disconnecting the fuel line fittings.
- Mount New Unit: Secure the V20-09-0416-1 with the supplied brackets, aligning the inlet and outlet ports precisely.
- Reconnect Fuel Lines: Attach high‑pressure hoses using appropriate fittings; verify that all connections are torque‑tight to avoid leaks.
- Electrical Wiring: Connect the pump’s power leads to the vehicle’s fuel system controller, ensuring correct polarity and secure insulation.
- Test Run: Reconnect the battery, start the engine, and monitor pressure gauges for proper operation. Check for any abnormal noises or vibrations.
Performance Benefits
- Enhanced Fuel Efficiency: By maintaining optimal fuel pressure, the pump contributes to smoother combustion cycles, reducing fuel consumption by up to 3% in some configurations.
- Improved Engine Response: The electric drive eliminates mechanical delay, allowing instant throttle response and better acceleration characteristics.
- Reduced Emissions: Precise fuel metering helps lower unburnt hydrocarbons, aiding compliance with stringent emission regulations.
- Longevity: With robust materials and built‑in safety mechanisms, the pump exhibits a service life exceeding 150,000 miles under normal operating conditions.
Maintenance Guidelines
Routine checks are essential to preserve optimal performance:
- Fuel Line Inspection: Every 20,000 miles, inspect hoses for cracks or wear and replace if necessary.
- Electrical Connections: Verify that all wiring harnesses remain free of corrosion; clean contacts with a non‑abrasive cleaner.
- Pressure Gauge Calibration: Calibrate the vehicle’s fuel pressure gauge annually to ensure accurate readings.
- Temperature Monitoring: Monitor the pump’s operating temperature during extended drives; if temperatures exceed 80°C, investigate potential airflow restrictions.
Technical Specifications
| Parameter | Value |
|---|---|
| Maximum Pressure | 120 bar (1,740 psi) |
| Operating Voltage | 12 V DC |
| Power Consumption | 350 W (typical) |
| Dimensions (L×W×H) | 120 mm × 80 mm × 90 mm |
| Weight | 2.5 kg |
| Material | Aluminum alloy with corrosion‑resistant coating |
| Seal Type | O‑ring (NBR) at inlet/outlet ports |
| Temperature Range | -40°C to +80°C |
Why Choose the VEMO Fuel Pump V20-09-0416-1?
The combination of German engineering precision, proven durability, and compatibility with a broad spectrum of vehicles makes this pump an attractive choice for both professional mechanics and automotive enthusiasts. Its electric design aligns with modern fuel system trends, ensuring that your vehicle operates at peak efficiency while maintaining reliability over the long haul.
Final Thoughts
Investing in a high‑quality fuel pump like the VEMO Fuel Pump V20-09-0416-1 guarantees that your engine receives clean, consistent fuel delivery under all driving conditions. Whether you are restoring a classic BMW 5 Series or upgrading an existing diesel platform, this unit delivers performance, safety, and peace of mind.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 47.38 EUR  44.98 EUR  98.31 EUR  42.38 EUR |
| Colors
Predominant colors of the product |
|
| Tags | VEMO Fuel Pump V20-09-0416-1 |
| Identifiers | |
| Brand |  Vemo is a brand that specializes in making watches. They make a wide variety of watches, from sporty to dressy, and everything in between. Their watches are known for their high quality and stylish designs. |
| MPN | Vemo V20-09-0416-1 |
| Model | Vemo V20-09-0416-1-VEM |
| ID | 7128795 |
| Dimensions / Weight | |
| Key Features | |
