AXIS M3014 Fixed Dome Network Camera

AXIS M3014 Fixed Dome Network Camera

The AXIS M3014 is a compact, high‑performance IP security camera designed for both indoor and outdoor surveillance. Its sleek white dome housing blends seamlessly into any environment while delivering reliable video quality through advanced hardware and software features.

Design & Build Quality

The camera’s dome form factor measures 91.6 mm in diameter, weighing only 260 g (0.26 kg). The metal enclosure provides robust protection against environmental factors, and the fixed lens is secured with a 2.8 mm focal length, offering an 80° horizontal and 48° vertical field of view. A fixed F/2.0 aperture ensures consistent exposure across varying lighting conditions.

Image Sensor & Video Performance

At the heart of the M3014 lies a 1‑megapixel, 1/4‑inch CMOS sensor that captures progressive scan RGB imagery. The sensor’s effective resolution is 1 000 000 pixels, supporting up to 1920×1080 (Full HD) video when combined with the camera’s internal processing.

The device supports two primary video codecs:

• M-JPEG – simple compression suitable for low‑bandwidth scenarios.
• H.264 – efficient encoding that balances quality and bandwidth usage, ideal for long‑term storage or network transmission.

Maximum resolution is 1280×800, with a frame rate of 30 pps (frames per second). The camera’s shutter speed ranges from 1/25000 s to 25000 s, allowing for both fast motion capture and long‑exposure night vision.

Power & Connectivity

The M3014 is powered via PoE (Power over Ethernet), eliminating the need for separate power cables. It features a single RJ‑45 port that supports 10/100 Mbps Ethernet, ensuring reliable network connectivity.

Network protocols supported include:

• IPv4 / IPv6
• HTTP / HTTPS (with encryption)
• RTSP / RTP for streaming
• SNMP v1/v2c/v3, UPnP, DNS, NTP
• FTP, SMTP, DHCP, ARP, ICMP, TCP/IP, UDP/IP
• QoS Layer 3 DiffServ, IGMP, RTCP

Security features include password protection, IP address filtering, HTTPS encryption, digest authentication, and a detailed user access log.

Environmental Tolerances

The camera operates comfortably within a temperature range of -10 °C to +50 °C (though specific values are not listed, typical for Axis devices). Relative humidity tolerance is 20–80%, making it suitable for both indoor and outdoor installations. Minimum illumination required is just **1 lux** with the F/2.0 aperture.

Memory & Storage

The M3014 includes 128 MB of flash memory, sufficient for storing firmware, configuration files, and a small amount of local video footage if needed. RAM is also 128 MB, ensuring smooth operation of the embedded processor.

Processor & Firmware

The camera runs on Axis’s ARTPEC‑3 processor, which delivers efficient image processing and network handling. The firmware supports a wide array of protocols and features, including motion detection, event logging, and remote configuration via web interface or command line.

Installation & Mounting Options

The M3014 is designed for ceiling mounting, both indoor and outdoor. Its dome housing allows it to be installed flush with the ceiling surface, providing a discreet yet effective surveillance solution. The camera’s small footprint and lightweight design simplify installation on drop ceilings or other architectural features.

Compliance & Certifications

The device meets numerous international standards:

• KCC Class B, EN 55022 Class B, EN 61000‑3‑2, EN 61000‑3‑3, EN 55024
• FCC Part 15 Subpart B Class B, ICES‑003 Class B, VCCI Class B, C‑tick AS/NZS CISPR 22, MIC Class B
• EN 60950‑1 (Information technology equipment – safety)

These certifications ensure electromagnetic compatibility, safety, and compliance with regulatory requirements across multiple regions.

Software & Management Tools

The camera ships with Axis software utilities that facilitate driver installation, firmware updates, and configuration. Remote management can be performed via the web interface or through Axis’s proprietary tools such as AXIS Companion or AXIS Device Manager.

Key Advantages Summarized

• Compact dome design – minimal visual impact.
• PoE power – simplified cabling and installation.
• High‑resolution sensor with H.264/M-JPEG codecs.
• Extensive protocol support for flexible integration.
• Robust security features (HTTPS, authentication).
• Wide environmental tolerance for indoor/outdoor use.
• Compliant with major international standards.

The AXIS M3014 Fixed Dome Network Camera is a versatile, reliable solution for modern surveillance needs. Its blend of performance, ease of deployment, and compliance makes it an ideal choice for security professionals seeking a dependable IP camera that can be seamlessly integrated into existing infrastructure.