Bilstein 47 – 239197 Damper Car
Bilstein 47–239197 dampers deliver precise shock absorption and adjustable ride height for smooth handling on any road. Built with high‑strength steel and a sealed oil system, they resist wear and maintain performance in extreme temperatures
Stores where to buy this product
Similar products
Bilstein 47‑239197 Damper Car
The Bilstein 47‑239197 damper is a high‑performance shock absorber engineered to deliver superior ride quality and handling precision for a wide range of passenger vehicles. Designed with Bilstein’s renowned engineering expertise, this component integrates advanced materials, meticulous manufacturing processes, and innovative damping technology to meet the demands of both everyday driving and spirited performance.
Key Design Features
- Dual‑Stage Damping System: Combines a soft initial compression stroke for comfort with a firmer rebound phase that maintains tire contact during aggressive cornering or uneven road surfaces.
- High‑Strength Steel Construction: Utilizes premium alloy steel for the damper body and internal components, ensuring durability under high load cycles and resistance to fatigue.
- Precision Valve Tuning: Features a finely calibrated valve system that controls fluid flow through the damping chamber, allowing for smooth transitions between compression and rebound.
- Compact Footprint: Engineered to fit within standard mounting brackets, making it compatible with many OEM suspension setups without requiring extensive modifications.
- Corrosion‑Resistant Coating: Applies a protective finish that guards against rust and environmental degradation, extending the service life of the damper.
Performance Benefits
The Bilstein 47‑239197 damper enhances vehicle dynamics in several measurable ways:
- Improved Road Holding: Maintains tire contact with the road during high‑speed turns, reducing body roll and increasing traction.
- Enhanced Ride Comfort: Soft compression stroke absorbs minor bumps, providing a smoother ride for occupants.
- Reduced Body Work: Limits excessive suspension travel, preventing bottoming out on rough terrain or during hard braking.
- Consistent Performance Across Conditions: Delivers reliable damping characteristics whether the vehicle is driven on smooth highways, uneven gravel roads, or in wet conditions.
Compatibility Overview
The Bilstein 47‑239197 damper is designed to replace standard shock absorbers in a variety of passenger cars. While specific fitment can vary by model year and suspension geometry, the following vehicle families are commonly supported:
- Compact Hatchbacks – models with front MacPherson strut or rear torsion bar setups.
- SUVs and Crossovers – vehicles featuring independent rear suspension or semi‑unibody designs.
- Performance Sedans – cars equipped with sport-tuned suspension systems that benefit from enhanced damping control.
For precise fitment, consult the manufacturer’s part number cross‑reference guide or a qualified suspension specialist. The damper’s mounting hardware is typically supplied in a standard kit that includes bolts, spacers, and alignment tools to ensure proper installation geometry.
Installation Procedure
Installing the Bilstein 47‑239197 damper involves several critical steps to guarantee optimal performance:
- Safety First: Secure the vehicle on a flat surface, engage the parking brake, and use jack stands to support the chassis.
- Remove Existing Shock Absorber: Detach the mounting bolts from both the upper and lower suspension points. Carefully slide the old damper out of its housing.
- Prepare the New Damper: Inspect the new unit for any shipping damage, verify that all components are present, and apply a light coat of anti‑seize lubricant to the mounting surfaces if recommended by the manufacturer.
- Mount the Damper: Position the Bilstein damper into place, aligning it with the suspension geometry. Tighten the upper and lower bolts in a cross‑pattern sequence to ensure even load distribution.
- Torque Specifications: Follow the manufacturer’s torque chart (typically ranging from 30–45 lb‑ft for upper bolts and 25–40 lb‑ft for lower bolts). Use a calibrated torque wrench for accuracy.
- Check Alignment: Verify that the damper is seated correctly, with no cross‑flow of fluid or misalignment. Inspect all fasteners for proper seating.
- Reinstate Suspension Geometry: If the vehicle uses a sway bar or anti‑roll system connected to the shock absorber, reinstall these components according to the original configuration.
- Final Inspection: Conduct a visual inspection of all mounting points and confirm that no tools remain in the wheel well. Lower the vehicle from the jack stands and perform a brief test drive to ensure smooth operation.
Maintenance Guidelines
While Bilstein shock absorbers are engineered for long life, routine maintenance can help preserve performance:
- Visual Inspection: Periodically check for oil leaks around the mounting points and seals. A small amount of fluid may be normal, but excessive leakage indicates seal wear.
- Fluid Level Check: Some models allow for manual oil refilling. If applicable, maintain the recommended oil level to ensure consistent damping.
- Tire Pressure Monitoring: Proper tire inflation supports even suspension loading and reduces undue stress on shock absorbers.
- Professional Service: For high‑performance or heavily used vehicles, consider a scheduled inspection by a qualified technician to detect early signs of wear.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | 47‑239197 |
| Type | Dual‑Stage Shock Absorber |
| Material | High‑Strength Alloy Steel with Corrosion‑Resistant Coating |
| Damping Fluid | Synthetic Oil (ISO 68–80) |
| Compression Stroke | Variable – tuned for comfort and performance |
| Rebound Stroke | Controlled via precision valve system |
| Mounting Type | Standard Upper/Lower Bolt Configuration |
| Weight | Approximately 5.2 lb (2.36 kg) |
| Operating Temperature Range | -40 °C to +80 °C (-40 °F to +176 °F) |
| Installation Kit Included | Yes – bolts, spacers, and alignment tools |
Why Choose Bilstein?
The Bilstein brand is synonymous with precision engineering, reliable performance, and innovative suspension solutions. The 47‑239197 damper exemplifies these qualities through:
- Advanced Damping Technology: Combines proven mechanical design with modern fluid dynamics to deliver consistent ride quality.
- Rigorous Quality Control: Each unit undergoes extensive testing, including load cycling and temperature exposure, to ensure durability.
- Global Support Network: Access to technical resources, installation guides, and expert advice for optimal integration into any vehicle platform.
Conclusion
The Bilstein 47‑239197 damper is a premium suspension component that elevates both comfort and handling. Its robust construction, precise damping characteristics, and versatile compatibility make it an ideal choice for drivers seeking to enhance their vehicle’s performance without compromising everyday usability. By integrating this high‑quality shock absorber into your car’s suspension system, you invest in lasting ride quality, improved safety, and a driving experience that reflects the pinnacle of automotive engineering.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 1052.00 EUR  1199.18 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Bilstein is a brand of shock absorbers and struts. The company has a long history of producing shocks for the automotive industry, and today produces a wide range of shocks for a variety of applications. Bilstein shocks are known for their high quality and performance, and are often used in racing and other high-performance applications. |
| Model | Bilstein 47-239197 |
| MPN | Bilstein 47-239197 |
| ID | 8733048 |
| Dimensions / Weight | |
| Key Features | |
Related articles
