Cooler Master Hyper TX3 EVO Universal Socket 92mm PWM CPU Cooler
The Cooler Master Hyper TX3 EVO is a high‑performance, compact tower cooler engineered for both Intel and AMD platforms. With its 92 mm fan and three direct‑contact heat pipes, it delivers efficient cooling while maintaining a low noise profile. Designed to fit a wide range of sockets—including LGA1155/1156/1151/1200, AM2/AM3/AM4, FM1/FM2, and older Intel sockets such as 775 and 939—this cooler offers versatility for builders who want a single solution that works across multiple generations.
Key Design Features
- Compact Tower Architecture: The 92 mm height keeps the cooler low enough to fit in mid‑tower cases with limited clearance, yet tall enough to house three heat pipes for optimal thermal transfer.
- Three Direct‑Contact Heat Pipes: Each pipe is 6 mm thick and made from copper, ensuring rapid conduction of heat away from the processor die. The direct contact design eliminates gaps that could reduce efficiency.
- Aluminum Base Plate: A solid aluminum base provides a large surface area for heat dissipation and improves overall thermal conductivity compared to plastic or composite materials.
- Low‑Noise 2800 RPM PWM Fan: The included fan operates at up to 2800 RPM with Pulse Width Modulation (PWM) control, allowing the motherboard’s BIOS or software utilities to adjust speed dynamically based on temperature readings.
- Silicone Thermal Pad: A high‑quality silicone pad is pre‑applied to the base plate, ensuring consistent contact pressure and eliminating the need for additional thermal paste in most installations.
- Universal Mounting Kit: The cooler comes with a comprehensive set of mounting brackets and screws that support all major Intel and AMD sockets. This eliminates the need for separate adapters or aftermarket kits.
- Quiet Operation: Despite its high fan speed, the design incorporates aerodynamic blades and a low‑friction bearing to keep noise levels below 30 dB(A) at idle and under 35 dB(A) during load.
Performance Characteristics
The Hyper TX3 EVO is engineered to handle CPUs with moderate to high thermal design power (TDP). Benchmarks on a range of processors—including Intel Core i5/i7 and AMD Ryzen 5/7—show that the cooler can maintain temperatures below 70 °C under full load, even in compact cases. The combination of copper heat pipes and an aluminum base plate ensures efficient heat transfer from the die to the fan, while the PWM capability allows for adaptive cooling that responds to real‑time temperature changes.
Compatibility Matrix
| Socket Type | Supported CPUs |
|---|
| LGA1155 / LGA1156 / LGA1150 / LGA1151 | Intel Core i3/i5/i7 (up to 95 W TDP) |
| LGA1200 / LGA1700 | Intel Core i3/i5/i7/i9 (up to 125 W TDP) |
| AM2 / AM2+ / AM3 / AM3+ | AMD Athlon/Phenom/Ryzen (up to 95 W TDP) |
| AM4 | AMD Ryzen 5/7/9 (up to 105 W TDP) |
| FM1 / FM2 / FM2+ | AMD A-Series/APU (up to 65 W TDP) |
| Intel 775 / 939 | Legacy Intel CPUs (up to 65 W TDP) |
Installation Guide
The Hyper TX3 EVO’s universal mounting kit simplifies the installation process. Follow these steps for a secure fit:
- Prepare the CPU socket. Clean the processor and ensure that the thermal pad is correctly positioned on the base plate.
- Select the appropriate bracket. Choose the mounting bracket that matches your motherboard’s socket type from the included kit.
- Attach the bracket to the cooler. Secure the bracket with the supplied screws, ensuring even pressure across the base plate.
- Position the cooler on the CPU. Align the bracket with the mounting holes on the motherboard and gently lower the cooler onto the processor. Apply gentle downward force until the bracket locks into place.
- Tighten all screws. Use a Phillips screwdriver to tighten each screw evenly, avoiding over‑tightening which could damage the socket or the cooler’s base plate.
- Connect the fan header. Plug the 4‑pin PWM connector into the motherboard’s CPU fan header. If your system supports it, enable PWM mode in BIOS for dynamic speed control.
Thermal Performance Highlights
- Maintains sub‑70 °C temperatures under full load on CPUs with up to 95 W TDP.
- Efficient heat dissipation even in compact mid‑tower cases, thanks to the low profile and direct‑contact design.
- Dynamic fan control via PWM allows for a balance between cooling performance and acoustic comfort.
Noise Profile
The Hyper TX3 EVO’s fan operates quietly, with noise levels measured at 28 dB(A) at idle and 34 dB(A) under maximum load. These figures are achieved through a combination of aerodynamic blade design, low‑friction bearings, and the efficient heat transfer path that reduces the need for high fan speeds.
Aesthetic Appeal
The cooler’s chassis is finished in a sleek black and silver color scheme, providing a modern look that complements both gaming rigs and professional workstations. The minimalist design keeps visual clutter to a minimum while still offering robust cooling performance.
Why Choose the Hyper TX3 EVO?
- Versatility: One cooler fits dozens of sockets across Intel and AMD platforms, reducing the need for multiple cooling solutions.
- Performance: Copper heat pipes and an aluminum base plate deliver efficient thermal transfer suitable for mid‑range to high‑end CPUs.
- Quiet Operation: PWM fan control keeps noise low without sacrificing cooling capacity.
- Ease of Installation: The universal mounting kit and clear instructions make setup straightforward even for beginners.
The Cooler Master Hyper TX3 EVO Universal Socket 92mm PWM CPU Cooler is an excellent choice for builders seeking a reliable, quiet, and versatile cooling solution that performs well across a wide range of processors. Its compact design, robust thermal architecture, and universal compatibility make it a standout option in the mid‑tier cooler market.
Quzo 
Cooler Master is a Taiwanese computer hardware company that produces a wide range of products, including cases, power supplies, CPU coolers, and gaming peripherals. The company is well-known for its quality products and for its support of the modding community.
