Dell - SFP+ transceiver module - 10 GigE, 10Gb Fibre Channel - 10GBase-SR - 2 ports - LC - up to 500 m - for EqualLogic FS7610, PowerEdge T130, PowerEdge R230, R430, R440, R540, R740, R830, R940

Dell SFP+ Transceiver Module

The Dell 407-BBOK is a high‑performance SFP+ transceiver module designed for demanding data center environments. It delivers a robust 10 Gigabit Ethernet (10GBase‑SR) connection over short‑reach fiber, enabling rapid data transfer between Dell servers and storage arrays.

Key Technical Specifications

• Interface Type: SFP+
• Maximum Data Transfer Rate: 10 Gbps (10,000 Mbit/s)
• Maximum Transmission Distance: Up to 500 meters on multimode fiber
• Connector Type: LC
• Fiber Optic Technology: Short‑Reach (SR) for high bandwidth over short distances
• Supported Standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3z
• Port Quantity: 2 independent ports per module
• Medium: Multimode glass fiber (LWL)
• Integrated Network Functionality: Transceiver only, no additional processing

Compatibility Overview

This module is engineered to work seamlessly with a wide range of Dell hardware. It supports the following server families and storage platforms:

• PowerEdge Servers: R200, R220, R230, R240, R300, R320, R330, R340, R410, R415, R420, R430, R440, R510, R515, R520, R530, R540, R610, R620, R630, R640, R6415, R710, R715, R720, R720xd, R730, R730XD, R730xd XL, R740, R740XD, R740xd2, R7415, R7425, R805, R810, R815, R820, R840, R900, R905, R910, R920, R930, R940, R940xa, T130, T140, T330, T340, T410, T420, T430, T440, T610, T620, T630, T640, T710
• PowerEdge C Series: C4130, C4140, C6320P, C6420
• PowerEdge FC Series: FC430, FC630, FC640, FC830
• PowerEdge M Series: M640, M640 VRTX
• PowerVault Storage: DL2100, DL2200, DL2300, DR4100, DX6104 CSN, DX6112 SN, NX3000, NX3200, NX3300, NX400, NX440
• EqualLogic FS Series: FS7610
• Other Dell Platforms: VRTX, XR2, PowerEdge R630, R730, R730XD

Application Scenarios

The module is ideal for:

• High‑density server farms where rapid interconnects between compute nodes are required.
• Storage area networks (SAN) that rely on 10Gb Fibre Channel links for low latency and high throughput.
• Data center fabric upgrades transitioning from 1GbE to 10GbE without replacing existing fiber cabling.
• Virtualization environments demanding consistent, high‑bandwidth connectivity between hosts and shared storage.

Installation & Deployment Tips

1. Verify Compatibility: Confirm that the target server or storage device supports 10GBase‑SR SFP+ modules.
2. Prepare Fiber Cabling: Use multimode fiber with LC connectors; ensure cable length does not exceed 500 meters.
3. Insert Module: Gently slide the transceiver into an available SFP+ slot, aligning the gold contacts.
4. Secure Connection: Tighten any locking mechanism to prevent movement during operation.
5. Configure Network Settings: Set appropriate VLANs or port channels via the host’s management interface.

Performance Highlights

The Dell SFP+ module guarantees:

• Consistent 10 Gbps throughput across all supported devices.
• Low error rates thanks to robust optical design and high‑quality LC connectors.
• Scalable architecture with two independent ports, allowing dual connectivity or redundancy.
• Energy efficiency aligned with Dell’s data center power management goals.

Maintenance & Reliability

Regular inspection of fiber connectors and cable integrity is recommended. The module’s design supports hot‑swapping in many Dell platforms, minimizing downtime during upgrades or replacements.

Conclusion

The Dell 407-BBOK SFP+ Transceiver Module stands out as a reliable, high‑throughput solution for modern data centers. Its dual‑port design, extensive compatibility list, and adherence to industry standards make it an essential component for any organization looking to scale its network infrastructure with minimal disruption.