Price from
6278.39 GBP
6278.39 GBP
D-Link 24-Port LAYER2 Managed 10G Stack Switch
D-Link (0790069423611 / DXS-3400-24TC) - 10g support - ARP inspection - Built-in processor - Flow control support - Full Duplex - IGMP snooping - Jumbo frames support - Link aggregation - Loop protection
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
smartteck.co.uk
Back to the Office
Introducing the D-Link 24‑Port Layer 2 Managed 10G Stack Switch
The D-Link 24‑Port Layer 2 Managed 10G Stack Switch is engineered for high‑performance networking environments that demand robust connectivity, advanced management capabilities, and scalable architecture. With a blend of Layer 3 intelligence, extensive VLAN support, and stackable design, this switch delivers the flexibility required by modern data centers, enterprise campuses, and service provider backbones.
Key Design Highlights
- 24 RJ‑45 Ports (20 x 10 GbE + 4 Combo): 20 high‑speed copper ports support 10GBASE‑T, while the four combo ports provide both 10 GbE SFP+ and 10GBASE‑T options, enabling seamless uplink integration.
- Stacking Capabilities: Physical stacking of up to 4 units and virtual stacking of up to 32 devices create a single logical switch with aggregated bandwidth and simplified management.
- Layer 3 Managed Switch: Built‑in routing engine supports static routes, OSPF, BGP, and policy‑based routing, allowing the device to function as both a switch and a router.
- High Switching Capacity: With a forwarding rate of 357.12 Mpps and a switching capacity of 480 Gbps, the switch handles demanding traffic loads without bottlenecks.
- Robust Power & Cooling: 3 hot‑swap fans dissipate 557.94 BTU/h, while the unit supports dual power supplies for redundancy and reliability.
- Comprehensive Security Features: Supports 802.1x RADIUS authentication, MAC‑based, port‑based, and guest VLAN authentication to enforce strict access control.
- Extensive VLAN & QoS Support: Up to 4094 VLANs, private, voice, and MAC address–based VLANs; eight queues for traffic prioritization; jumbo frames up to 12 000 bytes.
- Advanced Management Interface: Web‑based GUI, SSH/SSL, SNMP (RFC1065, RFC1155, etc.), and CLI provide flexible administration options.
- Compliance & Certifications: Meets CE, FCC A, C‑Tick, VCCI, BSMI, CCC, cUL, CB standards for safety and electromagnetic compatibility.
Performance & Reliability
The switch’s 4 MB packet buffer memory ensures smooth handling of burst traffic, while the 48000‑entry MAC address table supports large broadcast domains. The device also implements IGMP snooping, MLD v1/v2, and Spanning Tree Protocol (STP) to maintain efficient multicast distribution and loop prevention.
With a power consumption of 159.8 W at 100–240 V input, the unit operates efficiently across global voltage ranges. The fan design maintains optimal internal temperatures even under full load, guaranteeing longevity and consistent performance.
Scalability & Flexibility
The stackable architecture allows administrators to expand network capacity incrementally. By adding up to four physical switches or integrating with a virtual stack of 32 devices, the switch can scale from small branch deployments to large campus networks without reconfiguring existing infrastructure.
Each combo port’s dual functionality means that uplinks can be configured as either copper or fiber, providing flexibility for diverse topologies. The presence of an RJ‑45 console port and a USB 2.0 interface offers multiple avenues for out‑of‑band management and firmware updates.
Security & Access Control
Security is paramount in modern networks. This switch incorporates 802.1x RADIUS authentication, enabling integration with centralized identity services. Additionally, it supports:
- MAC‑based authentication: Enforces device‑level access policies.
- Port‑based authentication: Grants or denies connectivity based on port assignment.
- Guest VLANs: Isolates visitor traffic from corporate networks.
These features collectively reduce the attack surface and simplify compliance with regulatory requirements.
Management & Monitoring
The switch’s web interface provides intuitive dashboards for real‑time monitoring of port statistics, VLAN assignments, and system health. SSH/SSL support ensures secure remote configuration, while SNMP compatibility allows integration with network management systems (NMS) such as SolarWinds or PRTG.
Event logging captures critical system events, enabling troubleshooting and audit trails. The device also supports system event logs for proactive maintenance.
Physical & Environmental Specifications
| Dimension (mm) | Height: 44 | Width: 441 | Depth: 380 |
|---|---|
| Weight | 6.65 kg |
| Operating Temperature | 0 °C to +50 °C |
| Humidity | 10%–95% RH (operating) |
| Power Input | 100–240 V, 50/60 Hz, 2 A |
| Fans | 3 hot‑swap fans |
| Cooling | 557.94 BTU/h |
Use Cases & Deployment Scenarios
- Enterprise Campus: Deploy as a core or distribution layer switch to support high‑density 10 GbE connectivity across multiple floors.
- Data Center Fabric: Stackable design allows for rapid expansion of the fabric, while Layer 3 routing ensures efficient inter‑subnet traffic flow.
- Service Provider Edge: The combo ports and robust security features make it suitable for edge deployments where fiber uplinks are required alongside copper connections.
- Branch Office: Compact form factor and low power consumption reduce rack space and energy costs, while VLAN segmentation secures guest access.
Conclusion
The D-Link 24‑Port Layer 2 Managed 10G Stack Switch delivers a powerful combination of speed, scalability, and security. Its stackable architecture, extensive VLAN capabilities, and comprehensive management tools make it an ideal choice for organizations seeking to future‑proof their networking infrastructure while maintaining operational simplicity.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Network hubs and switches |
|
International
Find this product in one of our international stores
|
 11768.91 EUR  9509.00 EUR  8615.01 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  D-Link is a Taiwanese networking equipment manufacturer that produces a wide range of products for the consumer, small business, and enterprise markets. Some of their most popular products include wireless routers, switches, and network attached storage devices. D-Link has a strong reputation for quality and reliability, and their products are often praised for their feature-richness and ease of use. |
| Model | D-Link DXS-3400-24TC |
| MPN | D-Link DXS-3400-24TC |
| ID | 10540619 |
| Dimensions / Weight | |
| Key Features | |
|
10g support Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.
|
Yes |
|
AC input frequency The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.
|
50 - 60 Hz |
|
AC input voltage The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.
|
100 - 240 V |
|
ARP inspection Indicates whether the product includes an ARP inspection feature, allowing the device to monitor and filter Address Resolution Protocol traffic for security or performance purposes.
|
Yes |
|
Authentication A list of authentication mechanisms that a network device can use to verify users or devices, such as Guest VLAN, Port-based authentication, MAC-based authentication, Web-based authentication, Captive Portal, and Auto VLAN. The values are comma‑separated strings representing each supported method.
|
Guest VLAN,MAC-based authentication,Port-based authentication |
|
Basic switching RJ-45 Ethernet ports quantity Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.
|
20 |
|
Built-in processor Indicates whether the product contains a built‑in central processing unit (CPU) that can execute instructions without requiring an external processor module. A value of "Yes" means the device has such a CPU; "No" means it does not.
|
Yes |
|
Combo SFP ports quantity Represents how many combo SFP (Small Form-factor Pluggable) ports are physically present on the product. The value is a simple integer indicating the total count of these ports, regardless of speed or interface variant.
|
4 |
|
Console port Represents how many console ports are physically present on the product. The value is a simple integer indicating the total count of console connectors, regardless of type or version.
|
RJ-45 |
|
Copper ethernet cabling technology A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.
|
10BASE-T,10GBASE-T,100BASE-T,1000BASE-T |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
380 mm |
|
DHCP features A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.
|
DHCP server,DHCP client |
| Electromagnetic compatibility | CE, FCC A, C-Tick, VCCI, BSMI, CCC |
| Fiber optic connector | SFP+ |
|
Flow control support Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.
|
Yes |
|
Forwarding Rate The maximum number of packets a device can forward per second, expressed in megapackets per second (Mpps) or similar units. It indicates the throughput capability of networking hardware such as switches and routers under optimal conditions.
|
357.12 Mpps |
|
Full Duplex Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.
|
Yes |
|
Heat dissipation The amount of thermal energy a product can dissipate, expressed in a standard unit such as BTU per hour or watts. It indicates the cooling requirement and helps compare how much heat the device generates during operation.
|
557.94 BTU/h |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
44 mm |
| IGMP snooping | Yes |
|
Input current The electrical current that a device draws from its power source, expressed in amperes (A). It indicates how much current the product consumes during normal operation and helps determine compatibility with power supplies or USB ports.
|
2 A |
|
Jumbo frames The largest Ethernet frame size (in bytes) that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.
|
12000 |
| Jumbo frames support | Yes |
|
Link aggregation Indicates whether the device can combine multiple network connections into a single logical link to increase bandwidth or provide redundancy.
|
Yes |
|
Loop protection Indicates whether the device includes loop protection to prevent network loops that can cause broadcast storms and disrupt traffic.
|
Yes |
|
MAC address table The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.
|
48000 entries |
|
Multicast support Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.
|
Yes |
|
Number of fans The total count of fan units included in the product. This value indicates how many separate fans are present, which can affect cooling performance and noise levels.
|
3 fan(s) |
|
Number of queues The total count of independent processing or scheduling queues that the product supports. A queue is a logical buffer used to manage tasks, packets, or requests in order, allowing the device to handle multiple streams or operations concurrently.
|
8 |
|
Package depth The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.
|
575 mm |
|
Package Height The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.
|
145 mm |
|
Package width The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
527 mm |
|
Pallet length The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.
|
110 cm |
|
Pallet width The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
120 cm |
|
Port mirroring Indicates whether the device supports port mirroring, a feature that allows one or more ports to copy traffic from another port for monitoring or analysis purposes.
|
Yes |
|
Safety A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.
|
cUL, CB, CE, CCC, BSMI |
|
Security algorithms Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.
|
802.1x RADIUS |
|
Spanning Tree Protocol Indicates whether the device implements the Spanning Tree Protocol (STP), a network protocol that prevents loops in Ethernet topologies by dynamically blocking and forwarding paths to maintain a loop‑free logical topology.
|
Yes |
|
SSH/SSL support Indicates whether the device can establish secure connections using SSH or SSL protocols, allowing encrypted remote management and data transfer.
|
Yes |
|
Switch type The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.
|
Managed |
|
Switching capacity The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.
|
480 Gbit/s |
|
System event log Indicates whether the device records system events, such as errors, warnings, or informational messages, in a log that can be accessed for troubleshooting or monitoring purposes.
|
Yes |
|
USB 2.0 ports quantity Represents the count of external USB 2.0 (high‑speed) connectors available on a device. The value is an integer indicating how many USB 2.0 ports can be used for data transfer or power delivery from the outside of the product, regardless of internal placement or version.
|
1 |
| Virtual LAN features | Private VLAN,Voice VLAN,MAC address-based VLAN,Port-based VLAN |
|
VLAN support Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.
|
Yes |
|
Web-based management Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.
|
Yes |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
6.65 kg |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
441 mm |
Related articles
TP-Link TL-SG1016PE 16-Port Gigabit Easy Smart PoE Switch with 8 PoE+ ports up to 30W each and 150W total power. Features metal casing, IGMP Snooping, Port Mirroring, VLAN support.
28-port managed network switch with Gigabit Ethernet, PoE, and rack mounting for reliable high-speed connectivity.
28‑port smart managed gigabit switch featuring four 10G SFP+ uplinks, Layer 2/3 routing, QoS, VLAN support, PoE+ capability, rack‑mountable design and 120 Gbps total switching throughput.
24‑port managed PoE+ switch with Fast Ethernet, two Gigabit BASE‑T ports, and two combo Gigabit BASE‑T/SFP ports for flexible uplinks, offering intelligent web‑smart management and power over Ethernet.
28-port managed network switch with Gigabit Ethernet, PoE, and rack mounting for reliable high-speed connectivity.
28-port managed network switch with Gigabit Ethernet, PoE, and rack mounting for reliable high-speed connectivity.