Price from
1504.58 GBP
1504.58 GBP
D-Link DXS-1210 Gigabit Ethernet Smart Managed Switch
D-Link (0790069428548 / 5845236) - 10g support - ARP inspection - Auto MDI/MDI-X - Broadcast storm control - Built-in processor - Flow control support - IGMP snooping - Jumbo frames support - Multicast support | Port Switch
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
Quzo
D-Link DXS-1210 Gigabit Ethernet Smart Managed Switch
The D-Link DXS-1210 is a high‑performance, rack‑mountable Layer 2 managed switch designed for enterprise and data‑center environments that demand reliable 10 Gbps connectivity, advanced security, and robust network management. With its blend of 12 copper 10GBASE‑T ports, two combo SFP+ slots, and an array of intelligent features, this device delivers both speed and flexibility.
Key Physical Characteristics
- Dimensions: 440 mm wide × 210 mm deep × 44 mm high (rack‑mountable)
- Weight: 3.15 kg, making it lightweight for rack installation.
- Power Supply: Internal AC adapter, 120–230 V, 50/60 Hz.
- Operating Temperature: –5 °C to +50 °C; Storage: –40 °C to +70 °C.
- Humidity: 0 %–95 % (non‑condensing).
Port Configuration & Connectivity
- 12 x 10GBASE‑T copper ports supporting 100/1,000/10,000 Mbps.
- 2 combo SFP+ slots that accept either a 10 Gbps fiber transceiver or a copper RJ‑45 cable (SFP+).
- Auto MDI/MDI‑X on all ports for plug‑and‑play connectivity.
- Jumbo frames up to 16,000 bytes, enhancing throughput for large data transfers.
Performance & Forwarding Capacity
The switch’s built‑in processor and store‑and‑forward architecture deliver a forwarding rate of 238.08 Mpps (million packets per second). With a switching capacity of 320 Gbps, the DXS‑1210 can handle heavy traffic loads while maintaining low latency.
Layer 2 Intelligence & VLAN Support
- VLAN capabilities: Voice VLAN, MAC address‑based VLAN, and port‑based VLAN.
- Spanning Tree Protocol (STP), Rapid STP (RSTP), and Multiple STP (MSTP) for loop prevention.
- Dynamic ARP Inspection (DAI) and DHCP snooping protect against spoofing attacks.
- Port mirroring allows traffic capture for diagnostics.
- Quality of Service (QoS) with Weighted Round Robin (WRR) and Deficit Weighted Round Robin (DWRR).
Security & Authentication
- 802.1X authentication via RADIUS, TACACS+, or local credentials.
- Secure Shell (SSH), including SSH2, for encrypted command‑line access.
- Encryption support: SSL/TLS, SSL 3.0, SSL 2.0, PEAP, TTLS.
- Access Control Lists (ACLs) with up to 256 rules per port.
- DoS protection, including broadcast/multicast/unicast storm control and MLD snooping.
Management & Remote Access
- Web‑based management interface for intuitive configuration.
- Command‑line interface (CLI) via Telnet, SSH, or console cable.
- SNMP v1/v2c/v3 support with RMON extensions and MIBs compliant with RFC 783, 951, 1157, 1213, 1350, 1493, 1901, 2131, 2233, 2246, 2475, 2570, 2598, 2618, 2819, 2865, 3164, and 3411‑17.
- HTTP/HTTPS, TFTP, and FTP for firmware updates.
Advanced Features & Diagnostics
- Integrated processor enables advanced features without external modules.
- Built‑in system event log records critical events for troubleshooting.
- Support for IPv4 and IPv6 static routing, including DHCP relay.
- LLDP support for network topology discovery.
- Power‑over‑Ethernet (PoE) is not supported, keeping the device focused on high‑speed data transport.
Compliance & Certifications
- CE, FCC, C‑Ticket, VCCI, BSMI, CCC certifications ensure compliance with global safety and electromagnetic standards.
- Designed to meet IEEE 802.1D/Q/S/W/X/1X, IEEE 802.3ab/ad/ae/an/az/p/u/z, and other relevant networking specifications.
Why Choose the D-Link DXS-1210?
The DXS‑1210 combines high throughput, extensive security, and flexible management in a compact rack‑mount form factor. Its 12×10G copper ports provide immediate gigabit connectivity for servers, storage arrays, and virtualization hosts, while the combo SFP+ slots allow future expansion to fiber or additional copper links.
With robust Layer 2 intelligence—STP variants, VLAN segmentation, QoS, and storm control—the switch protects network stability even under heavy traffic loads. Security features such as 802.1X authentication, ACLs, and encrypted management protocols safeguard against unauthorized access and data breaches.
The intuitive web interface, comprehensive CLI, and SNMP support make it easy to integrate into existing network management frameworks or to deploy in new environments requiring rapid configuration and monitoring.
Ideal Deployment Scenarios
- Enterprise LANs: Connect servers, workstations, and VoIP devices with guaranteed 10 Gbps performance.
- Data‑center interconnect: Provide high‑speed uplinks between racks or to aggregation switches.
- Virtualization platforms: Deliver low‑latency, high‑bandwidth connections for hypervisors and virtual machines.
- High‑performance computing clusters: Enable fast data transfer between compute nodes.
In summary, the D-Link DXS-1210 Gigabit Ethernet Smart Managed Switch delivers a powerful blend of speed, security, and manageability for modern network infrastructures that demand reliable 10 Gbps connectivity without compromising on control or protection.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Network hubs and switches |
|
International
Find this product in one of our international stores
|
 1769.28 EUR  2184.86 EUR  2024.07 EUR  2176.50 EUR |
| Colors
Predominant colors of the product |
|
| Tags | D-Link DXS-1210-16TC |
| Identifiers | |
| Brand |  D-Link is a Taiwanese networking equipment manufacturer that produces a wide range of products for the consumer, small business, and enterprise markets. Some of their most popular products include wireless routers, switches, and network attached storage devices. D-Link has a strong reputation for quality and reliability, and their products are often praised for their feature-richness and ease of use. |
| Model | D-Link 5845236 |
| MPN | D-Link 5845236 |
| ID | 10540766 |
| Dimensions / Weight | |
| Key Features | |
|
10g support Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.
|
Yes |
|
AC input frequency The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.
|
50 - 60 Hz |
|
AC input voltage The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.
|
120 - 230 V |
|
ARP inspection Indicates whether the product includes an ARP inspection feature, allowing the device to monitor and filter Address Resolution Protocol traffic for security or performance purposes.
|
Yes |
|
Auto MDI/MDI-X Indicates whether the device can automatically detect and configure MDI or MDI‑X connections for network cables, simplifying cable management and reducing manual setup.
|
Yes |
|
Basic switching RJ-45 Ethernet ports quantity Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.
|
12 |
|
Broadcast storm control Indicates whether a network device includes a feature that limits the amount of broadcast traffic to prevent network congestion and potential outages caused by excessive broadcast packets.
|
Yes |
|
Built-in processor Indicates whether the product contains a built‑in central processing unit (CPU) that can execute instructions without requiring an external processor module. A value of "Yes" means the device has such a CPU; "No" means it does not.
|
Yes |
|
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
|
CE, FCC, C-Ticket, VCCI, BSMI, CCC |
|
Combo SFP ports quantity Represents how many combo SFP (Small Form-factor Pluggable) ports are physically present on the product. The value is a simple integer indicating the total count of these ports, regardless of speed or interface variant.
|
2 |
|
Copper ethernet cabling technology A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.
|
10GBASE-T,100BASE-TX,1000BASE-T |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
210 mm |
|
DHCP features A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.
|
DHCP server,DHCP client |
|
Fiber ethernet cabling technology The type of fiber‑optic Ethernet cabling supported by the product, such as 1000BASE‑X, 10GBASE‑LR, or 40GBASE‑SR4. It indicates which standardized fiber media and transceiver combinations are compatible with the device.
|
1000BASE-X |
|
Flow control support Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.
|
Yes |
|
Forwarding Rate The maximum number of packets a device can forward per second, expressed in megapackets per second (Mpps) or similar units. It indicates the throughput capability of networking hardware such as switches and routers under optimal conditions.
|
238.08 Mpps |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
44 mm |
| IGMP snooping | Yes |
|
Jumbo frames The largest Ethernet frame size (in bytes) that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.
|
16000 |
| Jumbo frames support | Yes |
|
LED indicators A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.
|
Activity,Link,Power,Speed |
|
Multicast support Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.
|
Yes |
|
Package depth The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.
|
546 mm |
|
Package Height The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.
|
96 mm |
|
Package width The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
349 mm |
|
Pallet length The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.
|
110 cm |
|
Pallet width The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.
|
120 cm |
|
Port mirroring Indicates whether the device supports port mirroring, a feature that allows one or more ports to copy traffic from another port for monitoring or analysis purposes.
|
Yes |
|
Rack mounting Indicates whether a product is designed to be mounted in a rack system. The value can be "Yes" or "No", or it may specify the height occupied by the device using rack units (U) such as "1U", "2U", or a numeric measurement with unit, e.g., "61.25 mm".
|
Yes |
|
Routing protocol A list of routing protocols that the device can use or support, such as static IPv4/IPv6 routing, RIP, RIP-2, IGMP, MLD, VRRP, ECMP, and other network routing mechanisms. Each entry represents a distinct protocol or group of protocols that the product is capable of configuring or participating in.
|
Routing static IPv4, IPv6 static routing |
|
Safety A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.
|
cUL, CB, CE, CCC, BSMI |
|
Security algorithms Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.
|
802.1x RADIUS,SNMP,SSL/TLS |
|
Spanning Tree Protocol Indicates whether the device implements the Spanning Tree Protocol (STP), a network protocol that prevents loops in Ethernet topologies by dynamically blocking and forwarding paths to maintain a loop‑free logical topology.
|
Yes |
|
Store-and-forward Indicates whether the device can temporarily store data packets before forwarding them, allowing traffic management even when the destination is not immediately available. A positive value means the device can buffer and later deliver packets reliably.
|
Yes |
|
Switch type The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.
|
Managed |
|
Switching capacity The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.
|
320 Gbit/s |
|
System event log Indicates whether the device records system events, such as errors, warnings, or informational messages, in a log that can be accessed for troubleshooting or monitoring purposes.
|
Yes |
| Virtual LAN features | Voice VLAN,MAC address-based VLAN,Port-based VLAN |
|
VLAN support Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.
|
Yes |
|
Web-based management Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.
|
Yes |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
3.15 kg |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
440 mm |
Related articles
D-Link (0790069409332 / DXS-1210-12TC) - 10g support - Auto MDI/MDI-X - Energy Star certified - IGMP snooping - Jumbo frames support - LED indicators - Rack mounting - Spanning Tree Protocol - VLAN support | D-Link DXS-1210-12TC
The D-link DXS-1210-28S is a managed Layer 2/Layer 3 10 Gigabit Ethernet switch with 1U form factor and black color. It supports 100 Mbps, 1 Gbps, and 10 Gbps data transfer rates.
The D-Link Web Smart DXS-1210-12SC is a managed L2 network switch with 10 x 10 Gigabit SFP+ ports and 2 x combo 10 gigabit SFP+ ports. It is suitable for office and rack mount use, offering reliable connectivity in a compact design.
Our DXS-1210 switches are a cost-effective solution capable of servicing a range of network needs in businesses of any size - Equipped with a complete lineup of L2 features, the DXS-1210-10TS/12TC/12SC includes port mirroring - The cable diagnostic featur
Our DXS-1210 switches are a cost-effective solution capable of servicing a range of network needs in businesses of any size - Equipped with a complete lineup of L2 features, the DXS-1210-10TS/12TC/12SC includes port mirroring - The cable diagnostic featur