Price from
344.99 GBP
344.99 GBP
IEEE 802.11AC WAVE2 WIFI
Allied Telesis (0767035217239) - 2.4 ghz - 5 ghz - DHCP Client - Firmware upgradeable - Flow control support - MAC address filtering - MIMO - VLAN support - Internal - FCC CE RCM IMDA KC MIC BSMI/NCC OFCA SIRIM | 11ac Wave2
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
Back to the Office
IEEE 802.11AC WAVE2 Wi‑Fi Access Point Overview
The IEEE 802.11AC WAVE2 Wi‑Fi access point is a high‑performance, dual‑band wireless solution designed for modern enterprise and advanced home networks. It delivers robust connectivity across both the 2.4 GHz and 5 GHz spectrums while supporting the latest Wi‑Fi 5 (802.11ac) standards.
Key Wireless Capabilities
- Dual‑band operation: Simultaneous 2.4 GHz and 5 GHz radios provide flexibility for legacy devices and high‑throughput applications.
- MIMO technology: Multiple Input Multiple Output (MIMO) enhances spatial streams, increasing throughput and coverage.
- Maximum data rate: Up to 1167 Mbps on the 5 GHz band, enabling fast streaming, gaming, and large file transfers.
- Modulation schemes: Supports 16‑QAM, 64‑QAM, 256‑QAM, BPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK for optimal link adaptation.
Advanced Networking Standards
The device is compliant with an extensive set of IEEE standards:
- 802.11a/b/g/n/ac/i/k/r/v – ensuring backward compatibility and advanced security features.
- 802.1Q, 802.1X, 802.3, 802.3ab, 802.3u, 802.3x – facilitating VLAN tagging, port security, and high‑speed Ethernet connectivity.
- 802.11i, 802.11k, 802.11r, 802.11v – providing robust encryption (WPA2/WPA), fast roaming, and network management.
Security Features
Security is paramount in modern wireless deployments. This access point incorporates:
- Encryption algorithms: 64‑bit WEP, 128‑bit WEP, AES, TKIP, WPA, WPA2.
- HTTPS & SNMP support: Secure management and monitoring via encrypted protocols.
- MAC address filtering: Allows administrators to whitelist or blacklist devices at the MAC level.
- VLAN support: Enables segmentation of traffic for enhanced security and performance isolation.
Power and Connectivity
The unit is engineered for flexible deployment with the following power and network options:
- PoE+ (Power over Ethernet) input: 1 × 1000Base‑T RJ‑45 port delivering up to 30 W of power, simplifying installation by eliminating separate power cables.
- Input voltage range: 100–240 V AC (50/60 Hz) – suitable for global use.
- Ethernet LAN: Supports 10/100/1000 Mbps speeds with flow control and DHCP client functionality.
Physical Characteristics
The device is compact yet robust, making it ideal for wall or ceiling mounting in various environments.
- Dimensions: Height 43 mm, Width 163 mm, Depth 165 mm.
- Weight: 430 g – lightweight for easy handling during installation.
- Form factor: External unit with internal antenna design.
- Operating altitude: 0–3000 m, ensuring reliable performance in diverse geographic locations.
Certification and Compliance
The access point meets stringent regulatory standards across multiple regions, guaranteeing safety and interoperability:
- FCC, CE, RCM, IMDA, KC, MIC, BSMI/NCC, OFCA, SIRIM
Firmware and Management
Administrators can keep the device up to date with firmware upgradeable capabilities. The built‑in DHCP client allows seamless integration into existing network infrastructures without manual IP configuration.
Deployment Scenarios
- Enterprise Wi‑Fi: High density environments such as offices, conference rooms, and campuses benefit from the dual‑band MIMO performance.
- Advanced Home Networking: Provides gigabit Ethernet backhaul and PoE+ power for smart home hubs, media servers, or security cameras.
- Industrial and Retail: Rugged design and wide operating altitude make it suitable for warehouses, retail floors, and outdoor installations with wall mounting.
Conclusion
The IEEE 802.11AC WAVE2 Wi‑Fi Access Point combines cutting‑edge wireless technology, robust security, extensive standard compliance, and versatile power options into a single, compact solution. Its dual‑band MIMO architecture delivers high throughput while maintaining compatibility with legacy devices, making it an ideal choice for both enterprise and advanced residential deployments.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Electronics |
|
International
Find this product in one of our international stores
|
 446.84 EUR  465.48 EUR  473.47 EUR  431.99 EUR |
| Colors
Predominant colors of the product |
|
| Tags | 11ac Wave2 |
| Identifiers | |
| Brand |  Allied Telesis is a technology company that provides networking solutions for businesses. Their products include switches, routers, and wireless access points. Allied Telesis is headquartered in Japan, but has offices all over the world. |
| ID | 18838072 |
| Dimensions / Weight | |
| Key Features | |
|
2.4 ghz The radio frequency band used by a wireless device, expressed in gigahertz (GHz). Common values include 2.4 GHz and 5 GHz, which indicate the operating spectrum for Wi‑Fi or other wireless protocols.
|
Yes |
|
5 ghz Indicates whether the device can operate on the 5 GHz frequency band of Wi‑Fi networks.
|
Yes |
|
Antenna type The classification of an antenna used in a device, indicating its physical configuration or mounting style such as external, internal, integrated, directional, omnidirectional, or multi‑antenna setups (e.g., "2x2", "4 x External"). It helps buyers understand how the antenna is attached and what signal coverage it may provide.
|
Internal |
|
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
|
FCC CE RCM IMDA KC MIC BSMI/NCC OFCA SIRIM |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
165 mm |
|
DHCP Client Indicates whether the device supports the DHCP client function, meaning it can automatically request an IP address and related network settings from a DHCP server.
|
Yes |
|
Ethernet LAN data rates Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.
|
10,100,1000 Mbit/s |
|
Firmware upgradeable Indicates whether the device can receive firmware updates, allowing improvements in functionality and security fixes through downloads from the manufacturer.
|
Yes |
|
Flow control support Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.
|
Yes |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
43 mm |
|
Input frequency The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.
|
47-63 Hz |
|
Input voltage The range of alternating current voltage that a charger or power supply can accept, expressed in volts (V). It specifies the minimum and maximum input voltages compatible with the device.
|
100 - 240 V |
|
MAC address filtering Indicates whether the device supports filtering network traffic based on MAC addresses. When enabled, the device can allow or block communication for specific devices identified by their MAC address.
|
Yes |
|
Maximum data transfer rate The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
1167 Mbit/s |
|
MIMO Number of spatial streams supported by a wireless device for MIMO technology, expressed as two integers separated by "x" (e.g., 4 x 4). The first number indicates maximum transmit streams and the second maximum receive streams.
|
Yes |
|
Modulation The modulation technique used by a wireless device or component to encode digital information onto a carrier signal. Common schemes include QAM, OFDM, PSK, FSK and their variants. This attribute helps users understand the signal processing method and compatibility with other equipment.
|
16-QAM,64-QAM,256-QAM,BPSK,CCK,DBPSK,DQPSK,DSSS,OFDM,QPSK |
|
Number of products included The total count of individual items that are part of the product package or bundle. It indicates how many separate units, components, or accessories are supplied together in a single purchase, regardless of type or function. The value is expressed as an integer without any unit of measure.
|
1 pc(s) |
|
Operating altitude The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.
|
0 - 3000 m |
|
Output current The electrical current drawn by a device from its power source, expressed in amperes (A). It indicates how much current the product consumes during normal operation and helps determine compatibility with power supplies or USB ports.
|
2 A |
|
Output voltage The electrical potential difference that a device delivers to its load, expressed in volts (V). It indicates the nominal voltage supplied by the product’s power output and is useful for matching it with compatible accessories or systems.
|
12 V |
|
Placement A list of the positions or mounting options where a product can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.
|
Wall |
|
Security algorithms Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.
|
64-bit WEP,128-bit WEP,AES,HTTPS,SNMP,TKIP,WPA,WPA2 |
|
VLAN support Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.
|
Yes |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
430 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
163 mm |
Related articles
Excellent wireless coverage and performance with the latest Wave 2 802.11ac technology - Smart antenna technology which is proven able to mitigate co-channel interference, by adaptively adjust antenna patterns to fit each environment. - Simple installatio
The Ubiquiti UniFi nanoHD (UAP-NanoHD) is a high-performance wireless access point with WLAN AC, 4x4 MU-MIMO, and speeds of up to 1733 Mbit/s + 300 Mbit/s. It features Power over Ethernet (PoE) for easy installation and comes in a sleek white design.
The HP Wireless Access Point Instant On AP15 is a high-speed, 4x4 indoor access point that supports Power over Ethernet and provides coverage for up to 1733 Mbps. It features multi-user MIMO technology and is compatible with the IEEE 802.3af standard.
The Aruba HPE AP-518 is a dual band wireless access terminal with ZigBee, Bluetooth 5.0, 802.11ac Wave 2, and 802.11ax capabilities. It is PoE enabled and has multi-user MIMO technology.
The Aruba HPE AP-518 is a dual band wireless access terminal with ZigBee, Bluetooth 5.0, 802.11ac Wave 2, and 802.11ax capabilities. It is PoE enabled and has multi-user MIMO technology.
The HP Wireless Access Point Instant On AP15 is a high-speed, 4x4 indoor access point that supports Power over Ethernet and provides coverage for up to 1733 Mbps. It features multi-user MIMO technology and is compatible with the IEEE 802.3af standard.