Intel Core i5-4590S Tray
Intel (0675901259774 / CM8064601561214) - Bandwidth: 5 MB/s - Bus bandwidth: 5 - Intel Identity Protection Technology version: 1.00 - Intel TSX-NI version: 0
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
This product has not been found in any sponsored store recently, please check similar products from our sponsors or review other stores we offer where you may find the product.
Similar products
Intel Core i5‑4590S Tray
The Intel Core i5‑4590S is a fourth‑generation desktop processor built on the 22 nm Haswell architecture. Designed for mainstream PCs, it delivers solid performance while maintaining energy efficiency and thermal stability.
Key Architectural Features
- Cores & Threads: 4 physical cores with no Hyper‑Threading support, providing a total of 4 threads.
- Base Frequency: 3 GHz, which can be boosted up to 3.7 GHz under Intel Turbo Boost Technology 2.0.
- Cache: 6 MB Smart Cache, enabling fast data access for multi‑core workloads.
- Lithography: 22 nm process node, balancing performance and power consumption.
- Package Size: 37.5 × 37.5 mm, compatible with LGA1150 (Socket H3) motherboards.
Integrated Graphics Capabilities
The processor incorporates the Intel® HD Graphics 4600 GPU, which supports:
- Display Outputs: eDP, DP, HDMI, and VGA.
- Maximum DisplayPort Resolution: 3840 × 2160 px at 60 Hz.
- Maximum HDMI Resolution: 4096 × 2304 px (though practical refresh rates are limited to 24 Hz).
- DirectX Support: DirectX 11.2/12, enabling modern graphics APIs for gaming and media.
- OpenGL Version: 4.3, suitable for a wide range of graphical applications.
- Maximum Dynamic Frequency: 1150 MHz with a base frequency of 350 MHz.
- Dedicated Video Memory: Up to 2 GB shared from system RAM.
Memory & I/O Specifications
- Supported Memory Types: DDR3‑SDRAM and DDR3L‑SDRAM.
- Maximum Supported Memory: 32 GB across two dual‑channel DIMM slots.
- Memory Clock Speeds: 1333 MHz or 1600 MHz, with a memory bandwidth of 25.6 GB/s.
- PCI Express Configuration: Supports 1×16, 2×8, or 1×8 + 2×4 lane setups using PCIe 3.0.
- Maximum PCIe Lanes: 16, allowing high‑performance graphics cards and NVMe storage.
- DMI Bus Speed: 5 GT/s, facilitating efficient communication between the CPU and chipset.
Security & Advanced Technologies
- Intel® Secure Key Technology v1.0 for cryptographic operations.
- Intel Identity Protection Technology v1.00, enhancing user privacy.
- Intel Trusted Execution Technology (TXT) for secure boot and measured launch.
- Intel® Small Business Advantage (SBA) v1.00 and Stable Image Platform Program (SIPP) v1.00, ensuring reliable system performance.
- Enhanced Intel SpeedStep Technology for dynamic power management.
- Intel® Turbo Boost Technology 2.0 to increase clock speeds on demand.
- No support for Intel® Hyper‑Threading or TSX‑NI.
Thermal and Power Management
- TDP: 65 W, suitable for standard desktop cooling solutions.
- Case Temperature (Tcase): 71.35 °C under maximum load.
- System Bus Rate: 5 GT/s via DMI, ensuring efficient data transfer between CPU and chipset.
- Thermal Monitoring Technologies: Built‑in sensors for real‑time temperature tracking.
Launch & Market Positioning
The Intel Core i5‑4590S debuted in Q2 2014 as part of Intel’s 4th generation “Haswell” lineup. It targets the desktop market segment (DT) and is ideal for mainstream PCs, offering a balance between performance, power consumption, and cost.
Compatibility & Installation Notes
- Requires an LGA1150 (Socket H3) motherboard with a compatible BIOS update to support the 4th generation Haswell CPUs.
- Supports dual‑channel DDR3 memory up to 32 GB, ensuring ample capacity for multitasking and content creation workloads.
- PCIe 3.0 lanes provide high bandwidth for GPUs, SSDs, and other expansion cards.
Conclusion
The Intel Core i5‑4590S Tray exemplifies Intel’s commitment to delivering reliable, efficient processors for everyday computing. With its robust core count, integrated graphics, extensive memory support, and advanced security features, it remains a solid choice for users seeking dependable performance without the complexity of higher‑end workstation CPUs.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Processors for computers |
|
International
Find this product in one of our international stores
|
 |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Intel is a computer chip manufacturer that also produces motherboard chipsets, network interface controllers and other integrated circuits. It is the world's largest semiconductor company. |
| Model | Intel CM8064601561214 |
| MPN | Intel CM8064601561214 |
| ID | 8516318 |
| Dimensions / Weight | |
| Key Features | |
|
Bandwidth The highest rate at which a device can transfer data, expressed as a frequency in hertz (Hz). It indicates the maximum throughput capability of the component or connection and allows comparison across similar products.
|
5 MB/s |
|
Box Indicates whether a product is supplied in a closed box or container. A value of "Yes" means the item comes with protective packaging; a value of "No" indicates it does not.
|
No |
|
Bus Type The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.
|
DMI |
|
Bus type units The interface speed or bandwidth specification of a computer component, such as a processor or memory bus. Common units include GT/s (giga‑transfers per second) for PCIe lanes and MHz for clock frequencies. It indicates the maximum data transfer rate that the component can achieve under ideal conditions.
|
GT/s |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
PC |
|
ECC Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.
|
No |
|
Embedded options available Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.
|
Yes |
| Enhanced intel speedstep technology | Yes |
|
Execute disable bit Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.
|
Yes |
|
Generation The generation of a central‑processing unit indicates the cohort or family of CPU models that share common architecture, performance characteristics, and feature sets. It is typically expressed as an ordinal number (e.g., "1st Generation", "10th Gen") followed by the manufacturer name and model series, helping users compare processors across brands and time periods.
|
4th Generation |
|
Graphics & IMC lithography The minimum feature size that can be etched onto a semiconductor chip, expressed in nanometers (nm). It indicates the manufacturing technology generation and influences performance, power consumption, and integration density of the processor.
|
2 nm |
|
Graphics output A list of the video output connectors and protocols that a device can provide for transmitting visual signals, such as HDMI, DisplayPort, VGA, or USB‑C based outputs. Each entry indicates a distinct connector type or version (e.g., "HDMI 2.1", "DP 1.4"). This attribute helps users identify which displays or external devices the product can support.
|
eDP/DP/HDMI/VGA |
|
Idle states A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.
|
Yes |
|
Intel 64 Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.
|
Yes |
|
Intel enhanced halt state Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.
|
Yes |
|
Intel FDI Technology Indicates whether the product incorporates Intel’s Flexible Display Interface (FDI) technology, which enables high‑bandwidth video output and efficient power management for display connections.
|
Yes |
|
Intel Identity Protection Technology version Indicates the specific version number of Intel’s Identity Protection Technology that a product supports or implements. The value is typically a numeric string such as "1.00" or "0.00", representing the major and minor revision of the feature set.
|
1.00 |
|
Intel trusted execution technology Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.
|
Yes |
|
Intel TSX-NI Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.
|
No |
|
Intel TSX-NI version The specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by the processor, indicating its capability to handle transactional memory operations efficiently.
|
0.00 |
|
Launch date The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.
|
Q2'14 |
|
Market segment The target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.
|
DT |
|
Maximum internal memory The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.
|
32768 MB |
|
Maximum internal memory supported by processor The largest amount of internal random‑access memory (RAM) that a processor can address and support, expressed as a data size such as megabytes or gigabytes. It indicates the upper limit of memory capacity for active processes and multitasking performance on devices using this CPU.
|
32 GB |
|
Maximum number of PCI Express lanes The total count of PCI Express lanes available on a device or component, indicating the maximum number of high‑speed communication channels that can be used simultaneously for peripherals such as graphics cards, storage devices, and networking adapters.
|
16 |
|
Memory channels The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.
|
Dual-channel |
|
Memory clock speeds supported by processor The set of operating frequencies that a processor can run at, expressed in hertz (Hz). Values are typically listed as individual frequencies or ranges separated by commas, indicating the base clock and any boost or turbo options available for the CPU.
|
1333,1600 MHz |
|
Memory types supported by processor A list of the types of memory modules that a device can use, such as DDR4 SDRAM, LPDDR3, or other compatible standards. Each entry represents a distinct memory technology supported by the hardware.
|
DDR3-SDRAM |
|
On-board graphics adapter The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.
|
Yes |
|
On-board graphics adapter base frequency The clock speed at which the integrated graphics processor runs under normal conditions, expressed in hertz (Hz). It indicates how many cycles per second the GPU performs and is useful for comparing visual performance across devices that use an on‑board graphics solution.
|
350 MHz |
|
On-board graphics adapter DirectX version The version number of the DirectX graphics API supported by a device, indicating its graphical capabilities and compatibility with software that relies on specific DirectX features.
|
11.2/12 |
|
On-board graphics adapter ID The unique identifier of the integrated graphics adapter built into a device, typically expressed as a hexadecimal string such as "0x5916" or a numeric code like "1916". This value allows users and systems to distinguish between different GPU models and versions across laptops, desktops, and motherboards.
|
0x412 |
|
On-board graphics adapter model The model name or number of the integrated graphics adapter built into a device, such as a laptop or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.
|
Intel® HD Graphics 4600 |
|
PCI Express configurations A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.
|
1x16,2x8,1x8+2x4 |
|
PCI Express slots version The version of the PCI Express specification supported by a device or component. It indicates the maximum bandwidth and compatibility with PCIe devices such as graphics cards, storage controllers, and expansion cards. The value is typically expressed as a numeric revision (e.g., 2.0, 3.0, 4.0) but may also include descriptive labels for specific generations.
|
3.0 |
|
Processor ARK ID The Processor ARK ID is a numeric identifier assigned by Intel to each processor model. It uniquely distinguishes one CPU from another and can be used to look up detailed specifications, compatibility information, or firmware updates for that specific chip.
|
80816 |
|
Processor boost frequency The maximum operating frequency that a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.
|
3.7 GHz |
|
Processor brand name The name of the company that designs and produces the central processing unit used in a device, such as Intel, AMD or Qualcomm. It identifies the manufacturer so users can quickly see which brand’s processors are supported by the product.
|
Intel Core i5 Intel Core i5 Processor |
|
Processor cache The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.
|
6 MB |
|
Processor cache type The type or level of the internal cache memory in a processor, such as L1, L2, L3, or Smart Cache. This attribute indicates the hierarchical structure and naming convention used by the CPU manufacturer to describe its cache organization.
|
Smart Cache |
| Processor codename | Haswell |
|
Processor family The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.
|
4th gen Intel® Core™ i5 |
|
Processor lithography The lithography process defines the minimum feature size that can be etched onto a semiconductor chip, expressed in nanometers (nm). It indicates the manufacturing technology generation and influences performance, power consumption, and integration density of the processor.
|
22 nm |
|
Processor manufacturer The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.
|
Intel |
|
Processor model Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.
|
i5-4590S |
|
Processor operating modes The set of instruction set architectures or execution modes that a processor can operate in, such as 32‑bit or 64‑bit. This attribute indicates the architectural mode(s) supported by the CPU and helps users determine compatibility with software that requires a specific bitness.
|
64-bit |
|
Processor package size The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.
|
37.5 x 37.5 mm |
|
Processor series The processor series identifies the family or generation of a CPU, such as "Intel Xeon E5-2600" or "AMD Ryzen 5000". It is used to group models that share similar architecture, performance characteristics and compatibility features.
|
Intel Core i5-4500 Desktop series |
|
Processor socket The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.
|
LGA 1150 (Socket H3) |
|
Product Type Indicates the general classification or type of an item, such as "laptop", "projector", "router" or "paint". It helps users quickly identify the nature of the product and compare similar items across categories.
|
Processor |
|
Scalability The maximum number of CPU sockets that a product can support. It indicates how many processor units can be installed simultaneously in the system, which affects overall processing capacity and scalability.
|
1S |
| Status | Launched |
|
Stepping Der CPU‑Stepping bezeichnet die interne Version eines Prozessormodells, die bei jeder neuen Fertigungsrunde geändert wird. Er gibt an, welche Revision des Chips verwendet wurde und kann Einfluss auf Leistung, Energieverbrauch oder Kompatibilität haben.
|
C0 |
|
Supported instruction sets A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.
|
AVX 2.0,SSE4.1,SSE4.2 |
|
Tcase Valor que indica la temperatura a la cual el producto opera o se mantiene durante su uso normal. Se expresa en grados Celsius, Fahrenheit o Kelvin según el contexto del fabricante y permite comparar condiciones térmicas entre dispositivos similares.
|
71.35 °C |
| Thermal monitoring technologies | Yes |
|
Thermal solution specification A short alphanumeric code that identifies the thermal solution or cooling configuration used in a computer component such as a processor, motherboard, or chassis. The identifier is typically assigned by the manufacturer and can be referenced to determine compatibility, performance characteristics, or warranty information for the cooling system.
|
PCG 2013C |
Related articles
Intel Core i5-12400F 6-core processor, up to 4.4GHz, 18MB cache, no integrated graphics. LGA1700 socket compatible with Alder Lake platform.
Intel Core i7-14700F CPU with LGA1700 Socket and No Integrated Graphics, 20 Cores, Up to 5.4 GHz Turbo Speed, 33 MB Cache.
The Intel Core i5-12600K processor is a powerful and efficient CPU for desktops. It features 10 cores, 16 threads, and a base clock speed of 3.7 GHz that can boost up to 4.9 GHz.
Total Cores: 10, # of Performance-cores: 6, # of Efficient-cores: 4, Total Threads: 16, Max Turbo Frequency: 4.90 GHz, Performance-core Max Turbo Frequency: 4.90 GHz, Efficient-core Max Turbo Frequency: 3.60 GHz, Performance-core Base Frequency: 3.70 GHz,
Total Cores: 6, # of Performance-cores: 6, # of Efficient-cores: 0, Total Threads: 12, Max Turbo Frequency: 4.40 GHz, Performance-core Max Turbo Frequency: 4.40 GHz, Performance-core Base Frequency: 2.50 GHz, Cache: 18 MB Intel Smart Cache, Total L2 Cache
High-performance Intel Core i5 processor with 14 cores, 24MB cache and 3.5 GHz base speed, overclockable for enhanced gaming and productivity