Kit plc devolo dlan 550+ wifi 09841

Devolo dLAN 550+ WiFi Starter Kit is a comprehensive solution that blends Powerline networking with Wi‑Fi extension, delivering reliable, high‑speed connectivity throughout your home or office.

Key Features and Technical Highlights

• Dual Powerline Adapters: Two 500 Mbps Powerline adapters that transmit data over existing electrical wiring, eliminating the need for additional cabling.
• Wi‑Fi Repeater & Amplifier: Each adapter includes a built‑in Wi‑Fi repeater and signal amplifier (Range+), extending coverage up to 300 m² in open spaces.
• Single Ethernet Port: One RJ‑45 LAN port per adapter, enabling wired connections for PCs, gaming consoles, or smart TVs.
• Advanced Security: Supports 128‑bit AES encryption, WPA/WPA2, and WPS (PIN & PBC) to safeguard your network against unauthorized access.
• Power Efficiency: Low power consumption of 4.4 W per unit, ensuring minimal impact on your electricity bill.
• Robust Standards Compliance: Meets IEEE 1901 for Powerline and IEEE 802.11b/g/n for Wi‑Fi, guaranteeing compatibility with a wide range of devices.
• Wide Operating Conditions: Functions reliably between temperatures of -25 °C to +70 °C and humidity levels from 10 % to 90 %.
• LED Indicators: Clear status LEDs for LAN and WLAN connectivity, making troubleshooting straightforward.
• Auto MDI Support: Automatically detects cable type (straight‑through or crossover), simplifying installation.

How It Works

The kit leverages the existing electrical grid as a high‑speed data backbone. When you plug an adapter into a wall outlet and connect it to your router via Ethernet, the device encodes network traffic onto power lines using DSSS (Direct Sequence Spread Spectrum) modulation. The second adapter receives this signal, decodes it, and forwards it either as wired Ethernet or wireless Wi‑Fi.

The integrated Wi‑Fi repeater uses OFDM and QAM modulation schemes (including 64‑QAM, 256‑QAM, up to 4096‑QAM) to deliver robust, high‑throughput connections. The Range+ amplifier boosts the signal strength, reducing dead zones in larger spaces.

Installation Made Simple

1. Connect Adapter A: Plug into a wall outlet near your router and link it via Ethernet cable to the router’s LAN port.
2. Set Up Wi‑Fi: Use the included manual or web interface to configure SSID, password, and security settings. The adapter will automatically join the network.
3. Place Adapter B: Install in a location where you need extended coverage—ideally within the same electrical circuit for optimal performance.
4. Configure Repeater Mode: Enable Wi‑Fi repeater on Adapter B to broadcast the network further. The signal amplifier will enhance reach.

Performance Expectations

While real-world speeds depend on electrical wiring quality and interference, the kit is engineered for a maximum data transfer rate of 300 Mbps. Typical household usage—streaming HD video, online gaming, or large file transfers—benefits from this bandwidth without noticeable lag.

Compatibility and Ecosystem

The dLAN 550+ kit is fully compatible with any router that supports standard Ethernet connections. It also integrates seamlessly into larger devolo Powerline networks, allowing you to expand coverage by adding more adapters from the same series.

User Experience and Reliability

• Stable Connections: The CSMA/CA protocol ensures fair access to the shared medium, reducing packet collisions.
• Minimal Interference: By operating on the electrical grid, it avoids Wi‑Fi congestion in densely populated areas.
• Easy Troubleshooting: LED indicators provide instant feedback—green for active LAN/WLAN, amber for activity, and off when inactive.

Why Choose the dLAN 550+ Kit?

If you’re looking to eliminate Wi‑Fi dead zones without running new cables, this kit offers a plug‑and‑play solution that combines wired reliability with wireless flexibility. Its advanced security protocols protect your data, while its low power draw keeps energy consumption in check.

Final Thoughts

The Devolo dLAN 550+ WiFi Starter Kit stands out as a versatile, high‑performance networking solution that bridges the gap between wired and wireless connectivity. Its thoughtful design—encompassing robust standards compliance, strong security, and user-friendly installation—makes it an excellent choice for anyone seeking to enhance network coverage and stability in their living or working environment.