Original MANN-FILTER Oil filter H 617 n – Hydraulics filter set with gasket / gasket set – For Passenger Cars and Utility Vehicles

Overview of the MANN‑FILTER H 617 n Hydraulic Filter Set

The MANN‑FILTER H 617 n is a premium hydraulic filter designed for both passenger cars and utility vehicles. It combines a high‑performance filtration element with an integrated gasket set, ensuring a leak‑free installation and optimal protection of the hydraulic system.

Key Features at a Glance

• High‑Efficiency Filtration: Captures particles down to 2 µm, preserving hydraulic fluid quality.
• Durable Construction: Made from reinforced polypropylene and high‑grade rubber gaskets.
• Wide Compatibility: Fits a broad range of vehicles including Fiat, Deutz Fahr, and many commercial models.
• Easy Installation: Comes with a complete gasket set; no additional parts required.
• Long Service Life: Designed for extended intervals between filter changes in demanding work‑hydraulic applications.

Technical Specifications

Design Excellence for Work‑Hydraulics

The H 617 n filter is engineered to meet the rigorous demands of work‑hydraulic systems. Its robust construction resists abrasion from high‑pressure fluid streams, while the integrated gasket set prevents leaks that could compromise system integrity.

Filtration Element Technology

At the heart of the filter lies a multi‑layered media stack. The outer layer provides pre‑filtration, capturing larger debris, whereas the inner core offers fine filtration, trapping microscopic contaminants. This staged approach extends filter life and maintains hydraulic performance.

Gasket Integration

The gasket set is crafted from a blend of NBR (nitrile rubber) and EPDM (ethylene propylene diene monomer). This combination delivers excellent chemical resistance to oils, fuels, and additives while maintaining flexibility across temperature extremes. The gaskets are pre‑conditioned for immediate sealing upon installation.

Installation Guide

Installing the H 617 n filter is straightforward, thanks to its standardized thread size and included gasket set. Follow these steps:

1. Prepare the Mounting Surface: Clean the flange area of any dirt or old gasket material.
2. Place Gaskets: Position the rubber gaskets onto the filter body, ensuring even coverage.
3. Screw in the Filter: Hand‑tighten the filter onto the hydraulic port until snug.
4. Tighten to Specification: Use a torque wrench set to the manufacturer’s recommended value (typically 12–15 Nm).
5. Check for Leaks: After initial operation, inspect the seal for any fluid seepage.

Maintenance and Replacement Schedule

To preserve hydraulic system health, replace the H 617 n filter according to the following guidelines:

• Standard Operation: Every 12,000–15,000 km or 24 months, whichever comes first.
• Heavy‑Duty Work‑Hydraulics: Every 6,000–8,000 km or 12 months.
• Inspection: Visually inspect the filter for clogging or damage during routine maintenance checks.

Benefits of Choosing MANN‑FILTER H 617 n

• Extended System Life: By trapping contaminants early, the filter protects pumps, valves, and actuators from wear.
• Consistent Performance: Maintains hydraulic pressure and flow rates, ensuring reliable vehicle operation.
• Cost Savings: Reduces downtime and repair costs associated with contaminated fluid.
• Environmental Protection: Prevents oil leaks that could harm the environment.

Compatibility Matrix

The H 617 n filter is suitable for a wide range of vehicles. Below is a concise compatibility list, translated from multilingual references:

Quality Assurance and Compliance

The H 617 n filter meets stringent European automotive standards, including ISO 9001:2015 for quality management and ISO 14001:2015 for environmental stewardship. Its materials comply with EN 13405 specifications for hydraulic filters.

Frequently Asked Questions (FAQ)

Q: Can I use the H 617 n filter in a non‑automotive hydraulic system?

A: Yes, as long as the system’s pressure and temperature ranges align with the filter’s specifications.

Q: Is the gasket set compatible with all thread sizes?

A: The included gaskets are designed for standard M10×1.5 threads commonly found in passenger cars and light utility vehicles.

Q: How does the filter handle high‑temperature fluids?

A: The polypropylene body and rubber gaskets retain integrity up to +120 °C, ensuring reliable operation under thermal stress.

Conclusion

The MANN‑FILTER H 617 n Hydraulic Filter Set delivers unmatched protection for passenger cars and utility vehicles. Its advanced filtration technology, durable construction, and comprehensive gasket set make it the ideal choice for maintaining hydraulic system integrity in both everyday driving and demanding work‑hydraulic applications.