Original MANN-FILTER Oil Filter HD 419 – For utility vehicles

Product Overview

The MANN‑FILTER Oil Filter HD 419 is a premium hydraulic oil filter designed specifically for utility vehicles and industrial machinery that rely on high‑performance hydraulics. Engineered with MANN‑FILTER’s renowned filtration technology, this filter delivers exceptional protection against contaminants while maintaining optimal flow rates under demanding operating conditions.

Key Features & Technical Specifications

• Filter Type: Oil (hydraulic) filter
• Model: HD 419
• Size: 60 mm diameter, standard mounting flange
• Pressure Rating: Suitable for high‑pressure hydraulic systems up to 300 bar (4350 psi)
• Flow Capacity: Maintains flow rates of up to 200 L/min without significant pressure drop
• Filter Media: Multi‑layer polyester and synthetic fiber media engineered for fine particle capture down to 1 µm
• Construction: Durable polypropylene housing with a sealed gasket to prevent leaks
• Compatibility: Designed for use in utility vehicles, construction equipment, agricultural machinery, and other industrial hydraulic applications

Performance Benefits

The HD 419 filter is engineered to provide long‑term protection for hydraulic systems. Its advanced media layers trap a wide range of contaminants—including oil droplets, metal shavings, and dust—ensuring that the hydraulic pump, cylinders, and valves operate in clean conditions. This results in:

• Extended Component Life: Reduces wear on pumps and valves by preventing abrasive particles from circulating.
• Consistent System Efficiency: Maintains optimal flow rates, which translates into reliable power delivery for heavy‑duty tasks.
• Reduced Maintenance Intervals: The filter’s high capacity allows it to stay effective longer than standard filters, lowering the frequency of oil changes and filter replacements.
• Improved Fuel Economy: By keeping hydraulic fluid clean, the system operates more efficiently, which can translate into lower energy consumption for the vehicle or machine.

Installation Guide

Installing the HD 419 is straightforward and follows standard hydraulic filter replacement procedures. Follow these steps to ensure a proper fit:

1. Safety First: Disconnect the power source and relieve system pressure before removing the old filter.
2. Remove Old Filter: Unscrew or unbolt the existing filter housing, allowing any residual fluid to drain into a suitable container.
3. Inspect Housing: Check for cracks, corrosion, or damage. Replace if necessary.
4. Install New Filter: Place the HD 419 onto the mounting flange, ensuring that the gasket aligns correctly. Tighten to the manufacturer’s torque specification (typically 10–12 Nm).
5. Re‑pressurize System: Reconnect power and gradually bring the hydraulic system back to operating pressure.
6. Check for Leaks: Inspect all connections for any signs of fluid leakage. Tighten further if needed.

Maintenance & Replacement Schedule

The HD 419 is designed for high‑volume hydraulic systems, but regular monitoring ensures peak performance:

• Visual Inspection: Check the filter housing and gasket for signs of wear or contamination every 500 hours of operation.
• Oil Sampling: Perform oil analysis quarterly to detect any increase in particulate levels that may indicate filter saturation.
• Replacement Interval: Replace the filter at least every 1,000 hours or sooner if contamination is detected. In extreme operating conditions (e.g., dusty environments), consider a shorter interval.

Compatibility & Application Scope

The HD 419’s robust design makes it suitable for a wide range of hydraulic applications:

• Utility Vehicles: Trucks, vans, and other commercial vehicles that rely on hydraulic lifts or steering systems.
• Construction Equipment: Excavators, backhoes, and compactors where high‑pressure hydraulics are critical.
• Agricultural Machinery: Tractors and harvesters with hydraulic implements such as loaders and sprayers.
• Industrial Machines: Presses, lathes, and other equipment that use hydraulic power for precision movements.

Why Choose MANN‑FILTER HD 419?

MANN‑FILTER is a globally recognized leader in filtration technology. The HD 419 reflects the brand’s commitment to quality, durability, and performance:

• Proven Design: Built on decades of research into hydraulic filter media.
• Rigorous Testing: Each unit undergoes pressure endurance tests and flow rate validations before shipping.
• Environmental Considerations: The filter’s materials are recyclable, supporting sustainable maintenance practices.
• User‑Friendly: Standard size and mounting make it easy to swap with existing filters without special tools.

Conclusion

The MANN‑FILTER Oil Filter HD 419 is an essential component for anyone operating utility vehicles or industrial machinery that depend on reliable hydraulic performance. Its high‑pressure tolerance, efficient filtration media, and durable construction ensure that your hydraulic system remains clean, efficient, and long‑lasting—providing peace of mind and operational excellence in every task.