Original MANN-Filter Oil Filter for Automatic Transmissions HD 722 – Transmission Filter – For Utility Vehicles

MANN‑FILTER HD 722 Hydraulic Filter for Automatic Transmissions

The MANN‑FILTER HD 722 is a premium hydraulic filter specifically engineered to protect and extend the life of automatic transmission systems in utility vehicles. Designed with precision engineering, this filter delivers superior filtration performance while maintaining optimal fluid flow.

Key Features and Benefits

• High‑Efficiency Filtration: The HD 722 employs a multi‑layer filtration media that captures particles as small as 0.5 µm, ensuring clean transmission fluid and preventing wear on gears, clutches, and bearings.
• Robust Construction: Made from high‑grade polypropylene housing with reinforced seals, the filter resists cracking and deformation under extreme pressure and temperature conditions typical of heavy‑duty applications.
• Optimized Flow Dynamics: The internal geometry is engineered to minimize pressure drop while maintaining a consistent flow rate, which preserves transmission performance and reduces energy consumption.
• Wide Compatibility: The filter’s dimensions (70 mm diameter) and mounting design fit a broad range of automatic transmissions used in utility vehicles, including models from Valtra, Massey Ferguson, JCB, Fendt Vario, Landini, and other commercial machinery.
• Long Service Life: With a rated life of up to 30,000 km (or 12 months under normal operating conditions), the HD 722 reduces maintenance frequency and downtime.

Technical Specifications

Installation Guidelines

1. Preparation: Ensure the vehicle is parked on a level surface and the engine is cool. Disconnect the battery to prevent accidental start‑up.
2. Drain Transmission Fluid: Place a suitable container beneath the transmission pan, remove the drain plug, and allow fluid to fully empty.
3. Remove Old Filter: Unscrew or unclip the existing filter housing. Carefully detach the old filter from its mounting flange.
4. Install HD 722: Apply a thin layer of fresh transmission fluid to the gasket area, then mount the new filter onto the flange. Tighten according to manufacturer torque specifications (typically 12 Nm).
5. Re‑fill Transmission: Reinstall the drain plug and fill the transmission with the recommended fluid type and volume.
6. Check for Leaks: Start the engine, allow it to reach operating temperature, and inspect the filter area for any signs of leakage. Tighten further if necessary.

Maintenance Tips

• Always use the correct transmission fluid grade specified by the vehicle manufacturer.
• Inspect the filter housing gasket during each service interval; replace if cracked or worn.
• Avoid overfilling, which can cause foaming and reduce filtration efficiency.
• Store unused filters in a dry, cool environment to preserve seal integrity.

Why Choose MANN‑FILTER HD 722?

The MANN‑FILTER HD 722 is engineered by one of the world’s leading filter manufacturers. Its proven track record in heavy‑duty applications guarantees:

• Reliability: Consistent performance under harsh operating conditions.
• Compatibility: Designed to fit a wide array of automatic transmission models used across multiple vehicle brands.
• Cost Efficiency: Reduced downtime and extended service intervals translate into lower total ownership costs.
• Environmental Responsibility: High filtration efficiency reduces particulate contamination, thereby extending the life of the transmission and reducing waste.

Applications Across Vehicle Brands

The HD 722 filter is a universal replacement for many automatic transmissions. Some notable applications include:

• Valtra S Series tractors – MF 6600, MF 7600, MF 8600, MF 8700
• Massey Ferguson – MF 6600, MF 7600, MF 8600, MF 8700
• JCB – S Series
• Fendt Vario – 4.0L 4cyl models
• Landini – 60 7865, 8865, 400 4.0 (1999‑2006)
• Steyr – 70 mm variants for various transmission types
• Other utility vehicles requiring a robust hydraulic filter.

Conclusion

The MANN‑FILTER HD 722 Hydraulic Filter stands out as the optimal choice for automatic transmissions in utility vehicles. Its combination of high filtration efficiency, durable construction, and broad compatibility ensures that your transmission remains protected, operates smoothly, and enjoys an extended service life.