13.60 GBP
Microconnect butp6015gznetwork cable
MicroConnect B-UTP6015G is a reliable, high-quality Category 6 UTP 1.5m networking cable in blue color. Offering excellent data transmission performance, it's suitable for both home and office environments
Stores where to buy this product
LaptopHub
Microconnect B-UTP6015G – 1.5 m Cat6 UTP Networking Cable
The Microconnect B-UTP6015G is a high‑performance, 1.5‑meter Ethernet cable designed for modern networking environments. Built on the Cat6 standard, it delivers reliable data transmission up to 10 Gbps over short distances while maintaining excellent signal integrity at lower speeds such as 100 Mbps and 1 Gbps.
Cable Construction & Materials
- Core: Six twisted pairs of 28 AWG copper, each pair tightly wound to reduce crosstalk and electromagnetic interference (EMI).
- Insulation: Low‑k dielectric material ensures minimal signal loss and supports high‑frequency performance.
- Shielding: The cable features a U/UTP configuration—unshielded twisted pair with an overall foil shield. This design balances cost, flexibility, and protection against external noise.
- Outer Jacket: Durable PVC (Polyvinyl Chloride) sheath provides abrasion resistance, moisture protection, and compliance with industry safety standards.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Category | Cat6 |
| Length | 1.5 m (4.92 ft) |
| Connector Type | RJ‑45 (M) to RJ‑45 (M) |
| Maximum Data Rate | 10 Gbps (up to 1.5 m) |
| Bandwidth | 250 MHz |
| Shielding | U/UTP – foil shield around all pairs |
| Impedance | 100 Ω ± 15% |
| Temperature Range | -40 °C to +85 °C |
| Compliance | ISO/IEC 11801, ANSI/TIA‑568.2‑E |
Performance Highlights
The Cat6 UTP construction allows the cable to support high‑speed data links while minimizing crosstalk and attenuation. The foil shield further protects against external electromagnetic interference, making it suitable for environments with power cables or other sources of radio frequency noise.
Signal Integrity & Crosstalk Reduction
Twisted pairs in the cable are engineered to maintain a twist rate that keeps differential impedance stable. This design reduces common‑mode interference and ensures consistent performance across all six pairs, which is critical for 10 Gbps transmission.
Low Attenuation
The low‑k dielectric material minimizes signal loss over the 1.5‑meter run, preserving bandwidth and reducing the need for repeaters or amplifiers in short‑distance setups such as desktop connections, switch-to-switch links, or server rack cabling.
Ideal Use Cases
- Desktop Networking: Connect a computer to a local network switch or router with minimal latency.
- Data Center & Server Racks: Short runs between switches, servers, and storage devices where high bandwidth is required.
- Home Office Setups: Reliable connection for VoIP phones, smart home hubs, and media streaming devices.
- Industrial & Commercial Environments: Where moderate shielding protects against electromagnetic interference from machinery or power lines.
Installation Guidelines
- Connector Termination: Use a high‑quality RJ‑45 crimp tool. Follow the T568A or T568B wiring standard consistently on both ends to avoid mispairing.
- Cable Management: Keep the cable straight and avoid sharp bends; maintain a minimum bend radius of 10 × the cable diameter (≈15 mm) to preserve signal integrity.
- Avoid Interference: Run the cable away from high‑current power lines or fluorescent lighting fixtures when possible. If crossing is unavoidable, use at least a 90° angle and maintain a minimum separation of 30 cm.
- Testing: After termination, test the cable with an Ethernet cable tester to confirm continuity, correct pair order, and absence of shorts or opens.
Compatibility & Standards Compliance
The Microconnect B-UTP6015G meets international standards such as ISO/IEC 11801 for generic cabling and TIA‑568.2‑E for structured cabling in North America. Its Cat6 rating ensures backward compatibility with older network equipment while providing the bandwidth needed for future upgrades.
Environmental & Safety Features
- Fire Resistance: The PVC jacket complies with fire safety regulations, offering a low smoke emission and limited flame spread characteristics suitable for indoor installations.
- Moisture Resistance: The cable’s construction prevents water ingress, making it reliable in damp or humid office spaces.
- Temperature Tolerance: Operating range from -40 °C to +85 °C ensures performance stability across a wide array of climates and industrial settings.
Conclusion
The Microconnect B-UTP6015G 1.5 m Cat6 UTP cable delivers dependable, high‑speed connectivity for both residential and professional networking scenarios. Its robust construction, adherence to industry standards, and thoughtful design make it an excellent choice for anyone requiring a short, reliable Ethernet link that can handle future bandwidth demands.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Networking Devices - Ethernet Cables |
|
International
Find this product in one of our international stores
|
 5.14 EUR |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  MicroConnect is a brand that specializes in making high-quality, reliable connectors and cables. Their products are used in a variety of industries, including medical, automotive, and industrial. They are known for their customer service and support, as well as their innovative products. |
| Model | MicroConnect B-UTP6015B |
| MPN | MicroConnect B-UTP6015B |
| ID | 10838320 |
| Dimensions / Weight | |
| Key Features | |
Related articles
