MicroMemory 2 x 8GB, DDR2 Memory

MicroMemory 2 × 8GB DDR2 Memory – An Overview

The MicroMemory 2 × 8GB DDR2 kit is a high‑performance memory solution designed for servers, workstations, and enterprise systems that require reliable, error‑correcting code (ECC) RAM. Each kit contains two 8 GB DIMM modules, totaling 16 GB of usable memory.

Key Technical Specifications

• Memory Type: DDR2 SDRAM (Double Data Rate 2)
• Capacity per Module: 8 GB (8,000 MB) of internal memory
• Total Capacity: 16 GB across the kit
• Clock Speed: 667 MHz (PC2‑5300)
• Pin Count: 240‑pin DIMM, compatible with standard DDR2 slots
• ECC Support: Yes – the modules include error‑correcting code to detect and correct single‑bit errors, enhancing system stability.
• Registered (Buffered) Option: Available in certain configurations for use in high‑end servers that require registered memory.

Design and Build Quality

The modules feature a robust PCB layout with multiple layers to reduce signal interference. The heat spreaders are engineered to dissipate thermal energy efficiently, ensuring consistent performance even under heavy workloads. Each DIMM is sealed against dust and moisture, making it suitable for data‑center environments.

Compatibility

The MicroMemory 2 × 8GB DDR2 kit is engineered to fit a wide range of platforms:

• IBM Systems: Compatible with IBM servers that support DDR2 ECC memory.
• Lenovo ThinkStation D10: Works seamlessly in Lenovo workstation models requiring 240‑pin DDR2 DIMMs.
• Other Enterprise Workstations: Any system that accepts 667 MHz, 240‑pin DDR2 ECC modules will support this kit.

Performance Highlights

With a data rate of 1.334 GB/s per DIMM (double the clock speed due to DDR), the kit delivers:

• High throughput for database operations, virtualization, and scientific computing.
• Low latency thanks to the 667 MHz clock, ideal for real‑time applications.
• Enhanced reliability through ECC, reducing system crashes caused by memory errors.

Installation Guide

1. Power Off: Ensure the system is completely powered down and unplugged.
2. Open the Case: Remove the side panel to access the motherboard slots.
3. Locate DDR2 Slots: Identify the 240‑pin DIMM slots compatible with ECC memory.
4. Insert Modules: Align each 8 GB module with the slot notch and press firmly until the latches click into place.
5. Secure Latches: Confirm that both sides of the latch are engaged to lock the modules securely.
6. Reassemble: Replace the side panel, reconnect power, and boot the system.

Maintenance Tips

• Keep the system in a clean environment; dust can accumulate on heat spreaders.
• Use static‑discharge wrist straps when handling modules to prevent electrostatic damage.
• Regularly check BIOS/UEFI settings to ensure ECC is enabled for maximum protection.

Conclusion

The MicroMemory 2 × 8GB DDR2 Memory Kit offers a reliable, high‑capacity solution for demanding computing environments. Its combination of ECC support, robust build quality, and compatibility with major enterprise platforms makes it an excellent choice for professionals seeking stability and performance in their memory infrastructure.