MZ-76P512BW
Samsung (8801643075385 / MZ-76P512BW) - PC/notebook - Samsung MJX - Serial ATA III - MLC (Multi Level Cell) - Box - 256-bit AES - Data transfer rate: 6 Gbit/s - SSD Capacity: 512 GB - Depth: 6
Stores where to buy this product
Similar products
SAMSUNG 860 PRO 512GB SSD (MZ-76P512BW)
The MZ-76P512BW, commonly known as the Samsung 860 Pro, is a high‑performance 2.5‑inch SATA III solid state drive engineered for both desktop and notebook systems. It delivers exceptional speed, reliability, and endurance while maintaining a compact form factor suitable for modern laptops and small‑form PCs.
Key Technical Specifications
- Capacity: 512 GB of non‑volatile storage
- Form Factor: 2.5″, 100 mm × 69.8 mm × 6.8 mm
- Interface: Serial ATA III (SATA 3) – 6 Gb/s maximum transfer rate
- NAND Flash Type: 3D Multi‑Level Cell (MLC)
- Controller: Samsung MJX
- Read Speed: Up to 560 MB/s
- Write Speed: Up to 530 MB/s
- Power Consumption (Idle): 2 W during read operations
- Maximum Power Draw: 4.5 W under peak load
- Operating Shock Resistance: 1500 G
- Non‑Operating Shock Resistance: 1500 G
- Vibration Tolerance (Non‑Operating): 20 G
- S.M.A.R.T. Support: Yes – real‑time health monitoring
- TRIM Support: Yes – efficient garbage collection and wear leveling
- Encryption: 256‑bit AES hardware acceleration for secure data protection
Performance Highlights
The Samsung 860 Pro’s combination of a robust MJX controller and dense 3D MLC NAND allows it to sustain high throughput while keeping power usage low. Its read speed of 560 MB/s and write speed of 530 MB/s make it ideal for tasks that demand rapid data access, such as booting operating systems, launching applications, and handling large media files.
Because the drive operates at only 2 W during typical read workloads, it is well‑suited to laptops where battery life is a priority. Even under maximum load, the power draw stays below 4.5 W, ensuring that thermal output remains manageable for compact chassis designs.
Reliability and Durability
The 860 Pro’s shock resistance of 1500 G (both operating and non‑operating) guarantees resilience against accidental drops or impacts, while the 20 G vibration tolerance protects it during transport or in mobile environments. These specifications are particularly valuable for users who travel frequently or work in dynamic settings.
The drive’s built‑in S.M.A.R.T. (Self‑Monitoring, Analysis and Reporting Technology) provides continuous health diagnostics, enabling proactive maintenance before failures occur. Coupled with TRIM support, the SSD maintains optimal performance over its lifespan by efficiently managing unused data blocks.
Security Features
Data protection is a cornerstone of the 860 Pro’s design. The hardware‑accelerated 256‑bit AES encryption ensures that sensitive information remains confidential, even if the drive is removed from its host system. This feature is essential for professionals handling proprietary or regulated data.
Ideal Use Cases
- High‑Performance Computing: Fast boot times and application launches in workstations and gaming rigs.
- Professional Media Production: Seamless editing of high‑resolution video and large image libraries.
- Enterprise Workstations: Reliable storage for data‑intensive workloads with built‑in health monitoring.
- Laptop Users: Low power consumption and compact size preserve battery life without sacrificing speed.
Conclusion
The Samsung 860 Pro (MZ-76P512BW) exemplifies a balanced blend of speed, efficiency, durability, and security. Its 512 GB capacity, coupled with industry‑leading read/write performance and robust shock/vibration tolerance, makes it an excellent choice for anyone seeking dependable storage in a slim, power‑conscious package.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Internal SSD (Solid State Drive) |
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | ![]() Samsung is a South Korean multinational conglomerate company. It is the world's largest information technology company, and the world's second-largest semiconductor company. Samsung Electronics, a subsidiary of Samsung Group, is the world's largest information technology company, and the world's second-largest semiconductor company. |
| MPN | Samsung MZ-76P512BW |
| ID | 18677553 |
| Dimensions / Weight | |
| Key Features | |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
PC/notebook |
|
Controller type The model or designation of a hardware controller component, such as a network interface card, storage controller, or other embedded controller. It identifies the specific product line or series used in the device and helps users determine compatibility, performance characteristics, and support options.
|
Samsung MJX |
|
Data transfer rate The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
6 Gbit/s |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
6.8 mm |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
69.8 mm |
|
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.
|
Serial ATA III |
|
Memory type The classification of a device’s memory technology, such as DDR4 SDRAM, GDDR6, or MLC NAND. It indicates the underlying architecture and generation that determines performance characteristics like bandwidth, latency, and power consumption.
|
3D MLC |
|
NAND flash type The type of NAND flash memory cells used in a storage device, such as Single Level Cell (SLC), Multi‑Level Cell (MLC), Triple‑Level Cell (TLC) or Enterprise MLC (eMLC). It indicates how many bits are stored per cell and influences performance, endurance and cost.
|
MLC (Multi Level Cell) |
|
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.
|
1500 G |
| Non-operating vibration | 20 G |
|
Package type The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.
|
Box |
| Power consumption (read) | 2 W |
|
Read speed The maximum rate at which a device can read data from storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can retrieve information for processing or transfer.
|
560 MB/s |
|
S.M.A.R.T. support Indicates whether the product supports S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology), a feature that monitors storage device health and predicts failures.
|
Yes |
|
Security algorithms Una lista de los algoritmos criptográficos y protocolos de seguridad que el producto soporta, como cifrado (AES, WEP), autenticación (WPA2-PSK, EAP-TLS) o protocolos de red (HTTPS, SSH). Cada elemento describe un algoritmo individual; la lista puede contener varios valores separados por comas.
|
256-bit AES |
| SSD Capacity | 512 GB |
|
SSD form factor Represents the physical form factor of a solid‑state drive, indicating its size and connector type (e.g., M.2, 2.5", 3.5"). This attribute helps users identify compatibility with motherboards, enclosures, or laptops.
|
2.5" |
|
TRIM support Indicates whether the storage device supports the TRIM command, which allows an operating system to inform the drive which blocks of data are no longer considered in use and can be wiped internally. This feature improves performance and longevity on solid‑state drives by enabling efficient garbage collection.
|
Yes |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
100 mm |
|
Write speed The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.
|
530 MB/s |





