243.88 GBP
Origin Storage CPQ-300SAS/15-S6 Internal
Origin Storage (5055146574439 / CPQ-300SAS/15-S6) - Average latency: 2 ms - HDD speed: 15000 RPM - Operating voltage: 5 V - Bytes per sector: 512 - Server/workstation - SAS - HDD - HDD Capacity: 300 GB | Origin Storage 300GB
Stores where to buy this product
Product Overview
The Origin Storage CPQ-300SAS/15-S6 is a high‑performance 2.5‑inch SAS hard disk drive (HDD) designed for demanding server and workstation environments. With a capacity of 300 GB, it delivers reliable storage in a compact form factor suitable for dense rack configurations.
Key Physical Characteristics
- Height: 6.35 mm – ideal for tight chassis constraints.
- Weight: 320 g – lightweight for efficient power and cooling management.
- Dimensions: 2.5‑inch form factor, standard for enterprise servers.
Performance Specifications
- Rotational Speed: 15 000 RPM – ensures rapid data access and low latency.
- Average Latency: 2 ms – contributes to swift read/write operations.
- Interface: SAS (Serial Attached SCSI) with a transfer rate of 6 Gb/s, providing robust bandwidth for high‑throughput workloads.
- Sector Size: 512 bytes – standard sector size compatible with legacy and modern operating systems.
- Buffer Size: 128 MB – enhances caching performance and reduces seek times.
Operating Conditions
- Operating Temperature: 5 °C to 55 °C – suitable for typical data center environments.
- Storage Temperature: -40 °C to 70 °C – allows safe storage in a wide range of climates.
- Humidity: 5 %–95 % (both during operation and storage) – ensures resilience against moisture variations.
- Operating Voltage: 5 V – aligns with standard server power supplies.
Compatibility Matrix
The drive is engineered to fit seamlessly into a broad spectrum of HP/Compaq ProLiant servers and workstations. Notable compatible models include, but are not limited to:
- BL20p G2 & G4
- BL25p G2
- BL45p G2
- BL460c (G5, G6, G7)
- BL465c (G5, G6, G7)
- BL480c
- BL620c G7
- BL680c (G5, G7)
- BL685c (G5, G6, G7)
- DL1000
- DL120 G7
- DL160 (G5, G6)
- DL160se G6
- DL165 G7
- DL170e G6
- DL170h G6
- DL180 G6
- DL320 G6
- DL360 (G5, G6, G7)
- DL365 (G5)
Design and Build Quality
The drive features a robust SAS interface that supports dual‑port connectivity for fault tolerance and load balancing. Its multicolored casing not only adds visual distinction but also aids in quick identification during maintenance.
Reliability and Compliance
- RoHS Compliant: Yes – free from hazardous substances, ensuring environmental safety.
- No Hot‑Swap Capability: The drive is intended for non‑hot‑swap installation; it requires a controlled shutdown for replacement.
- Refurbished Status: No – the unit is new and factory sealed.
Typical Use Cases
- Enterprise Servers: High‑density storage in HP/Compaq ProLiant blade and rack servers.
- Workstations: Reliable data access for professional applications requiring fast I/O.
- Virtualization Platforms: Efficient backing of virtual machine images with low latency.
- Database Servers: Consistent performance for transaction‑heavy workloads.
Installation Notes
When installing the CPQ-300SAS/15-S6, ensure that the server’s power supply is compatible with a 5 V input and that the chassis supports a 2.5‑inch drive bay. The drive should be seated firmly in the bay to maintain proper alignment of the SAS connectors.
Conclusion
The Origin Storage CPQ-300SAS/15-S6 delivers a blend of high capacity, rapid data access, and broad compatibility within enterprise server ecosystems. Its design caters to environments where performance, reliability, and efficient space utilization are paramount.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Internal HDDs (Hard Disk Drives) - SAS hard drives |
|
International
Find this product in one of our international stores
|
|
| Colors
Predominant colors of the product |
|
| Tags | Storage 300GB |
| Identifiers | |
| Brand | ![]() Origin Storage is a leading provider of storage solutions, including hard drives, SSDs, memory and accessories. The company offers a wide range of products for both consumers and businesses, and its products are known for their quality, reliability and performance. Origin Storage is committed to providing the best possible customer experience, and its products are backed by a comprehensive warranty. |
| MPN | Origin Storage CPQ-300SAS/15-S6 |
| Model | Origin Storage CPQ-300SAS/15-S6 |
| ID | 8529072 |
| Dimensions / Weight | |
| Key Features | |
|
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.
|
2 ms |
|
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.
|
512 |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
Server/workstation |
|
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.
|
300 GB |
|
HDD interface transfer rate The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.
|
6 Gbit/s |
|
HDD size The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.
|
2.5" |
|
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.
|
15000 RPM |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
6.35 mm |
|
Hot-swap Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.
|
No |
|
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.
|
SAS |
|
Internal Indicates whether the product is designed to be installed inside a computer system or other device, such as an internal hard drive, SSD, network card, or component. A value of "Yes" means it can be mounted within the chassis; a value of "No" indicates it is intended for external use.
|
Yes |
|
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.
|
5 V |
|
Refurbished Indicates whether the product has been refurbished, meaning it has undergone a quality inspection and repair process to restore it to a like-new condition before resale.
|
No |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.
|
No |
|
Storage drive buffer size The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.
|
128 MB |
|
Type The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.
|
HDD |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
320 g |

