Price from
305.16 GBP
305.16 GBP
Origin Storage DELL-1000NLS/7-S9 Internal
Origin Storage (5055146571391 / DELL-1000NLS/7-S9) - Average latency: 4.16 ms - Compatible products: Dell PowerEdge 9 Series - HDD speed: 7200 RPM - HDD sustained transfer rate: 136 MiB/s - Operating voltage: 5 V | 7200RPM Hot
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
computersdeal.co.uk
smartteck.co.uk
Origin Storage DELL-1000NLS/7-S9 Internal Hard Drive
The Origin Storage DELL-1000NLS/7-S9 is a high‑performance, 1 TB internal hard disk drive (HDD) engineered specifically for Dell PowerEdge 9 Series servers and workstations. With its compact 2.5‑inch form factor, robust NL‑SAS interface, and hot‑swap capability, this drive delivers reliable data storage in demanding enterprise environments.
Key Design Features
- Form Factor: 2.5 in, 15 mm thick, 70.1 mm wide, 100.5 mm deep – ideal for tight rack spaces.
- Capacity: 1 TB (1024 GB) of high‑density storage.
- Interface: NL‑SAS with a transfer rate of 6 Gb/s, supporting both SAS II and SATA compatibility in mixed environments.
- Hot‑Swap: Yes – replace drives without shutting down the system, ensuring continuous uptime.
- Color: Multicolour (standard OEM finish).
- Included Accessories: HDD caddy for secure mounting and cable management.
Performance Specifications
| Parameter | Value |
|---|---|
| Rotation Speed | 7200 RPM |
| Average Latency | 4.16 ms |
| Sustained Transfer Rate | 136 MiB/s |
| Data Transfer Rate (Interface) | 6 Gb/s |
| Buffer Size | 128 MB |
| Bytes per Sector | 512 |
| Mean Time Between Failures (MTBF) | 2,000,000 h |
Electrical and Environmental Tolerances
- Operating Voltage: 5 V DC.
- Power Consumption (Read): 5.9 W.
- Idle Power: 3.29 W.
- Power‑Save Mode: 1.52 W.
- Operating Temperature: 5 °C to 55 °C.
- Storage Temperature: –40 °C to +70 °C.
- Operating Shock: 25 G.
- Non‑Operating Shock: 400 G.
- Operating Vibration: 0.5 G.
- Non‑Operating Vibration: 3 G.
- Relative Humidity (Operating): 5 % to 95 % RH.
- RoHS Compliant: Yes – free of hazardous substances.
Compatibility and Integration
This drive is specifically designed for Dell PowerEdge 9 Series servers, ensuring seamless integration with Dell’s chassis, power supplies, and management software. Its NL‑SAS interface guarantees low latency and high throughput in clustered or virtualized workloads.
Reliability and Durability
The DELL-1000NLS/7-S9 incorporates advanced vibration damping and shock‑resistant construction, allowing it to operate reliably in data centers with stringent environmental controls. The 2 million hour MTBF rating reflects rigorous testing and quality assurance processes.
Installation Overview
- Mount the HDD caddy: Slide the drive into the provided caddy, securing it with the included screws.
- Insert into server bay: Place the caddy into a 2.5‑inch hot‑swap slot in the Dell PowerEdge chassis.
- Connect cables: Attach the NL‑SAS cable to both the drive and the backplane, ensuring proper alignment.
- Power on: The server will detect the new drive automatically; no BIOS configuration is required.
Use Cases
- Enterprise File Storage: High‑capacity, low‑latency storage for shared file services.
- Virtualization Platforms: Reliable backing for virtual machine images and snapshots.
- Database Servers: Consistent throughput for transaction processing workloads.
- Backup Solutions: Durable media for long‑term archival and disaster recovery.
Conclusion
The Origin Storage DELL-1000NLS/7-S9 Internal Hard Drive combines robust performance, stringent reliability metrics, and tight integration with Dell PowerEdge 9 Series servers. Its hot‑swap capability, NL‑SAS interface, and comprehensive environmental tolerances make it a dependable choice for mission‑critical data centers that demand uninterrupted service and scalable storage solutions.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- SAS hard drives |
|
International
Find this product in one of our international stores
|
  |
| Colors
Predominant colors of the product |
|
| Tags | WatchGuard Firebox Competitive |
| Identifiers | |
| Brand |  Origin Storage is a leading provider of storage solutions, including hard drives, SSDs, memory and accessories. The company offers a wide range of products for both consumers and businesses, and its products are known for their quality, reliability and performance. Origin Storage is committed to providing the best possible customer experience, and its products are backed by a comprehensive warranty. |
| MPN | Origin Storage 5055146571391 |
| Model | Origin Storage DELL-1000NLS/7-S9 |
| ID | 8528930 |
| Dimensions / Weight | |
| Key Features | |
|
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.
|
4.16 ms |
|
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.
|
512 |
|
Colour The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.
|
Multicolour |
| Compatible products | Dell PowerEdge 9 Series |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
Server/workstation |
|
Data transfer rate The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
3 Gbit/s |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
100.5 mm |
|
Harmonized System HS code The Harmonized System (HS) code is a standardized numerical identifier used internationally to classify traded goods. It consists of up to six digits, where each pair of digits represents progressively more specific product categories. The HS code facilitates customs duties, trade statistics, and regulatory compliance by providing a common language for describing products across borders.
|
84717050 |
|
HDD caddy included Indicates whether a hard‑disk drive caddy is supplied with the product. A value of "Yes" means a caddy for mounting or transporting the drive is included in the package, while "No" indicates that no caddy is provided and must be purchased separately.
|
Yes |
|
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.
|
1024000 MB |
|
HDD interface transfer rate The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.
|
6 Gbit/s |
|
HDD size The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.
|
2.5" |
|
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.
|
7200 RPM |
|
HDD sustained transfer rate The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.
|
136 MiB/s |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
15 mm |
|
Hot-swap Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.
|
Yes |
|
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.
|
NL-SAS |
|
Internal Indicates whether the product is designed to be installed inside a computer system or other device, such as an internal hard drive, SSD, network card, or component. A value of "Yes" means it can be mounted within the chassis; a value of "No" indicates it is intended for external use.
|
Yes |
| Mean time between failures | 2000000 h |
|
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.
|
400 G |
|
Operating relative humidity The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.
|
5 - 95% |
|
Operating temperature The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.
|
5 - 55 °C |
|
Operating vibration The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.
|
0.5 G |
|
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.
|
5 V |
| Power consumption (read) | 5.9 W |
|
Power consumption idle The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.
|
3.29 W |
|
Power consumption powersave The electrical power drawn by a device while it is in powersave mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.
|
1.52 W |
|
Refurbished Indicates whether the product has been refurbished, meaning it has undergone a quality inspection and repair process to restore it to a like-new condition before resale.
|
No |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.
|
No |
|
Storage drive buffer size The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.
|
128 MB |
|
Storage temperature The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.
|
-40 - 70 °C |
|
Sustainability certificates A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.
|
RoHS |
|
Type The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.
|
HDD |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
320 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
70.1 mm |
Related articles
Origin Storage (5055146593485 / DELL-1000NLS/7-F21) - Average latency: 4.16 ms - HDD speed: 7200 RPM - HDD sustained transfer rate: 175 MiB/s - Operating voltage: 5 / 12 V - Bytes per sector: 512 - Dell PWS T7600
This 1TB 7.2K PE *900/R Nearline SAS 3.5-inch hard drive from Origin Storage offers fast read and write speeds, low power consumption, and a reliable storage solution for your data needs.
1TB 7.2K Desktop Nearline SAS HDD, Origin Storage, 3.5-inch without Caddy - high capacity storage for data backup and archiving, ideal for home or office use with fast transfer speeds.
This is a 1 TB 7.2K RPM 3.5-inch Nearline SAS hot-swappable hard drive kit from Origin Storage's PE 13G series, designed for high-capacity backup and archiving needs.
Enhance your HP Optiplex 3040, 5040, or 7040 with the Origin Storage 500GB 7.2K SATA HD kit, offering reliable and fast performance in a compact 3.5-inch form factor—ideal for efficient data storage and system upgrades.
