Price from
125.99 GBP
125.99 GBP
Origin Storage DELL-1000SATA/7-F17 Internal
Origin Storage (5055146578598 / DELL-1000SATA/7-F17) - Average latency: 4.14 ms - Compatible products: Dell OptiPlex 790, 990 DT - HDD speed: 7200 RPM - Operating voltage: 5 / 12 V - Read Seek Time: 0
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
Back to the Office
Origin Storage DELL-1000SATA/7-F17 Internal Hard Drive
The Origin Storage DELL-1000SATA/7-F17 is a high‑performance, 1 TB internal hard disk drive (HDD) engineered for use in Dell OptiPlex 790 and 990 DT workstations. Designed with enterprise reliability in mind, this drive delivers robust storage capacity, fast data access speeds, and comprehensive environmental tolerance.
Key Specifications
- Capacity: 1 TB (1024000 MB)
- Form Factor: 3.5‑inch, Depth: 147 mm, Height: 261 mm, Width: 101 mm
- Weight: 850 g
- Interface: Serial ATA III (SATA 6 Gb/s)
- Rotation Speed: 7200 RPM
- Sector Size: 512 bytes per sector
- Buffer Size: 32 MB
- Average Latency: 4.14 ms
- Read Seek Time: 0.6 ms
- Write Seek Time: 0.8 ms
- Power Consumption (Read): 6.4 W
- Power Consumption (Write): 6.4 W
- Stand‑by Power: 1 W
- Idle Power: 3.7 W
Environmental and Operational Tolerances
The drive is built to withstand a wide range of operating conditions, making it suitable for both office and industrial environments.
- Operating Temperature: 5 °C – 55 °C (41 °F – 131 °F)
- Non‑operating Temperature: -40 °C – 70 °C (-40 °F – 158 °F)
- Operating Relative Humidity: 5 % – 95 %
- Non‑operating Relative Humidity: 5 % – 95 %
- Operating Altitude: -304.8 m to 3048 m (-1000 ft to 10,000 ft)
- Non‑operating Altitude: -304.8 m to 12192 m (-1000 ft to 40,000 ft)
- Operating Shock: 70 G
- Non‑operating Shock: 350 G
- Operating Vibration: 0.67 G
- Non‑operating Vibration: 1.04 G
Compatibility and Integration
This hard drive is specifically engineered for the Dell OptiPlex 790 and Dell OptiPlex 990 DT desktop systems, ensuring seamless integration with their motherboard layouts and power delivery specifications. The unit comes pre‑installed in a standard 3.5‑inch caddy, simplifying installation and providing secure mounting within the chassis.
Operating System Support
The drive is fully compatible with major operating systems:
- Windows: Supported on all recent Windows desktop editions.
- Linux: Compatible with mainstream Linux distributions, supporting SATA III drivers out of the box.
Compliance and Sustainability
The product meets stringent environmental standards, including RoHS compliance, ensuring that hazardous substances are excluded from its manufacturing process. This commitment to sustainability aligns with modern corporate responsibility initiatives.
Additional Features
- Hot‑swap: Not supported – the drive is intended for static installation within a desktop enclosure.
- HDD Caddy Included: Yes – the caddy facilitates easy mounting and secure placement.
- Refurbished Status: New (not refurbished).
Why Choose the Origin Storage DELL-1000SATA/7-F17?
For professionals who demand reliable, high‑capacity storage in a compact form factor, this drive offers:
- Robust performance: 7200 RPM and SATA III interface deliver fast data throughput.
- Durability: Wide operating temperature range and shock/vibration tolerance protect against environmental stressors.
- Ease of installation: Pre‑mounted caddy and compatibility with Dell OptiPlex workstations reduce setup time.
- Energy efficiency: Low standby power consumption conserves energy during idle periods.
Whether you are upgrading a workstation for data‑intensive applications, expanding archival storage, or ensuring redundancy in mission‑critical environments, the Origin Storage DELL-1000SATA/7-F17 Internal Hard Drive delivers dependable performance and durability that meets professional standards.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- SATA Hard Drives |
|
International
Find this product in one of our international stores
|
This product has not been found in other countries
|
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Origin Storage is a leading provider of storage solutions, including hard drives, SSDs, memory and accessories. The company offers a wide range of products for both consumers and businesses, and its products are known for their quality, reliability and performance. Origin Storage is committed to providing the best possible customer experience, and its products are backed by a comprehensive warranty. |
| Model | Origin Storage DELL-1000SATA/7-F17 |
| MPN | Origin Storage DELL-1000SATA/7-F17 |
| ID | 8528832 |
| Dimensions / Weight | |
| Key Features | |
|
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.
|
4.14 ms |
|
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.
|
512 |
| Compatible products | Dell OptiPlex 790, 990 DT |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
PC |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
147 mm |
|
HDD caddy included Indicates whether a hard‑disk drive caddy is supplied with the product. A value of "Yes" means a caddy for mounting or transporting the drive is included in the package, while "No" indicates that no caddy is provided and must be purchased separately.
|
Yes |
|
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.
|
1024000 MB |
|
HDD interface transfer rate The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.
|
6 Gbit/s |
|
HDD size The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.
|
3.5" |
|
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.
|
7200 RPM |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
261 mm |
|
Hot-swap Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.
|
No |
|
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.
|
Serial ATA III |
|
Linux operating systems supported List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.
|
Yes |
|
Non-operating altitude The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.
|
-304.8 - 12192 m |
|
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.
|
350 G |
| Non-operating vibration | 1.04 G |
|
Operating altitude The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.
|
-304.8 - 3048 m |
|
Operating relative humidity The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.
|
5 - 95 % |
| Operating shock | 70 G |
|
Operating temperature The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.
|
5 - 55 °C |
|
Operating vibration The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.
|
0.67 G |
|
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.
|
5 / |
| Power consumption (read) | 6.4 W |
| Power consumption (StandBy) | 1 W |
|
Power consumption idle The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.
|
3.7 W |
|
Read Seek Time The average time required for a storage device to position its read/write head over the correct track before accessing data. It is expressed in milliseconds (ms) and indicates how quickly the device can begin reading or writing after a command is issued.
|
0.6 ms |
|
Refurbished Indicates whether the product has been refurbished, meaning it has undergone a quality inspection and repair process to restore it to a like-new condition before resale.
|
No |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.
|
No |
|
Storage drive buffer size The amount of temporary memory that a hard drive can hold before transferring data to the host system. Expressed as a digital capacity (e.g., kilobytes, megabytes). This attribute helps users understand how quickly a drive can process read/write operations and is useful when comparing performance across drives.
|
32 MB |
|
Storage temperature The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.
|
-40 - 70 °C |
|
Sustainability certificates A list of environmental, safety or quality certifications that a product has obtained from recognized authorities. Typical entries include RoHS, ENERGY STAR, CE, WEEE, TCO Certified, FCC, and other industry‑specific standards.
|
RoHS |
|
Type The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.
|
HDD |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
850 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
101 mm |
|
Windows operating systems supported A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.
|
Yes |
|
Write seek time The average time required for a storage device to move its read/write head to the desired track before performing an operation, expressed in milliseconds (ms). It indicates how quickly a drive can access data and is critical for overall performance.
|
0.8 ms |
Related articles
1TB 7200 RPM 2.5-inch SATA hard drive kit, optimized for reliability and performance in various applications.
Origin Storage (5055146594178 / DELL-1000SATA/7-F22) - Average latency: 4.14 ms - Compatible products: Dell Optiplex 790/990 MT - HDD speed: 7200 RPM - Operating voltage: 5 / 12 V - Read Seek Time: 0.6 ms
Origin Storage (5054629348390 / DELL-1000SATA/7-S13) - Average latency: 4.14 ms - HDD speed: 7200 RPM - Operating voltage: 5 / 12 V - Read Seek Time: 0.6 ms - Write seek time: 0.8 ms - Bytes per sector: 512
Origin Storage's 1TB 7.2K 2.5-inch PE 13G Series SATA Hot-Swap HD Kit is a high-performance hard drive for easy data storage and backup in various devices.