Phanteks PH-STC1310_CR G1/4 thread Soft Tubing Compression Fitting for 13/10mm Soft Tube

Product Overview

The Phanteks PH-STC1310_CR G1/4 thread Soft Tubing Compression Fitting is a precision-engineered component designed for liquid cooling systems. It provides a reliable, leak‑free connection between a standard G1/4 inch male threaded pipe and a 13/10 mm (≈5.12 mm) soft tubing. This fitting is essential for building or upgrading a PC’s water cooling loop, ensuring efficient heat transfer and system integrity.

Key Features

• Thread Compatibility: The fitting features a G1/4 inch (0.25") male thread, which is the most common threading standard for liquid cooling components such as radiators, pumps, and reservoirs.
• Soft Tube Diameter: It accepts soft tubing with an inner diameter of 13/10 mm (5.12 mm), a size that balances flexibility with sufficient flow capacity for most mid‑range to high‑end cooling loops.
• Compression Design: The fitting employs a compression mechanism that clamps the soft tube securely around the threaded pipe, creating an airtight seal without the need for additional gaskets or adhesives.
• Material Quality: Constructed from durable metal with a chrome‑silver finish, the component resists corrosion and maintains its structural integrity over extended periods of use.
• Ease of Installation: The fitting can be installed by simply tightening the compression nut until the tube is firmly seated. No specialized tools or skills are required beyond basic hand torque.

Installation Guide

1. Prepare the Soft Tube: Cut the soft tubing to the desired length, ensuring a clean, straight cut with a sharp blade or tube cutter. Remove any burrs that could damage the fitting.
2. Insert the Tube: Slide the softened end of the tube into the fitting’s interior until it reaches the compression point. The tube should be fully seated without gaps.
3. Screw on the Compression Nut: Hand‑tighten the nut onto the threaded pipe, then use a wrench to apply additional torque. Tightening should be firm enough to compress the tube against the fitting’s body but not so tight as to damage the tubing.
4. Check for Leaks: After installation, run the cooling loop at low pressure and inspect the joint for any signs of leakage. If a leak is detected, loosen the nut slightly, re‑seat the tube, and retighten.

Applications

This fitting is ideal for:

• Custom Water Cooling Builds: Connecting radiators, pumps, reservoirs, or water blocks that use G1/4 threading.
• Upgrades to Existing Loops: Replacing worn or damaged fittings without altering the overall system design.
• Modular Cooling Kits: Integrating with pre‑assembled kits that require a standard G1/4 to soft tube connection.

Compatibility Summary

Maintenance Tips

• Regular Inspection: Periodically check the compression nut for tightness, especially after system startup or shutdown cycles.
• Avoid Over‑Tightening: Excessive torque can crush the soft tube and create micro‑leaks. Use a calibrated wrench to apply consistent pressure.
• Clean Surrounding Area: Keep the fitting free from dust or debris that could compromise the seal during future adjustments.

Technical Specifications

• Thread Size: G1/4 inch (0.25") male
• Soft Tube Inner Diameter: 13/10 mm (5.12 mm)
• Material Finish: Chrome‑silver
• Compression Type: Standard compression nut
• Warranty Period: 1 year from date of purchase

Conclusion

The Phanteks PH-STC1310_CR G1/4 thread Soft Tubing Compression Fitting is a reliable, high‑quality component that plays a crucial role in the performance and safety of liquid cooling systems. Its straightforward design, robust materials, and compatibility with common G1/4 threaded hardware make it an indispensable part of any PC enthusiast’s toolkit.