Connecting block | Electrical installation

Wago 221-413 is a compact 3-wire connection terminal for 4mm² cables, suitable for up to 50 installations. It features 3 conductors with operating levers and accommodates cable sizes from 0.14mm² to 4mm².

Wago 221-412 compact clamp terminal, 2X4QMM. Used for wire connections in electrical installations. 100 piece kit. Lever nuts for easy installation.

Wago 221-412 compact clamp terminal, 2X4QMM. Used for wire connections in electrical installations. 100 piece kit. Lever nuts for easy installation.

Ideal connection terminal between solid conductors, connection without tools, connection points: 2, rated voltage: 450 V, rated current: 24 A. - Colour: transparent / white. Cable diameter: 0.5 - 2.5 mm². - Can be used e.g. for: blinds, roller shutter or

WAGO 2273-203 3-Way Compact Push Wire Connector - Pack of 100. Easy and secure connection for up to 3 conductors in a small and versatile design, ideal for junction boxes and various electrical applications.

Ideal connection terminal between solid and fine-wired, connection without tools, connection points: 2, rated voltage: 400 V, rated current: 32 A - Colour: grey/orange. Cable diameter: 0.08-2.5 mm² - Can be used e.g. for: blinds, roller shutter or awning

WAGO 222-413 3 conductor terminal block with levers, accommodates wire sizes from 0.08 to 4mm², designed for fast and easy installation of electrical connections in control cabinets and other applications.

Ideal connection clamp between Eindrähtigen ladders//Dock without tool//connection points: 5//Rated voltage: 450 V//Rated Current 24 a - Colour: Transparent/Yellow/Cable Diameter: 0.5 – 2.5 mm² - Can be used e.g. for: Blind, shutter/drain awning

The Phoenix Contact UT Fuse Clamp - 3046032 is a G-fuse terminal block with 5x20mm fuses and a current rating of up to 6.3A. It has 6.2mm terminals and is suitable for use in various applications where protection against overcurrent is required.

Sold by: 25 - Binding post terminals lever for rigid wires, semi-rigid and flexible - Two test. - Test Plug, two - 40 percent more compact than

Dual‑shelf feed‑through terminal block for 2.5 mm² conductors, rated 24 A, featuring Klippon® Connect screw terminals in beige. Compact 5 mm pitch, ideal for tight panel mounting and reliable signal routing.

Wago 221-613 is a 3-way lever cable connector with push-in technology for easy wire installation. It connects up to three cables at once and has a 6mm² cross-sectional capacity. Each box contains 30 pieces.

WAGO 2273-204 - Compact Push Wire Connector Terminal Block Housing, 4-conductor terminal block housing, compatible with solid conductors from 0.5-2.5mm², push-in mechanism for fast and easy wire connection, 100 pieces.

A simple flexible and compact 3 pole conductor terminal block for use with solid stranding and flexible cables up to 60mm2 in size - Simple easy and fast push wire installation requires no tools and can be fitted in seconds to stripped cables - Ideal for

Feed-through terminal block with screw connection, 2 connectors, and 12.2mm size, suitable for AWG 16-4 and 16 mm² nominal cross section applications.

The Phoenix Contact AKG 16 BU is a robust blue connection terminal block designed for direct mounting, accommodating wire sizes from 1.5 to 16mm². With a current rating of 76A, it ensures reliable electrical connections in various applications, making it an essential component for efficient wiring solutions.

Compact auxiliary contact block with one normally open and one normally closed terminal, rated for up to 6 A at 690 V. Designed for side‑mount installation in industrial control panels.

Wago Compact Push Wire® Connector 8-Conductor Terminal Block Housing - 2273-208: Flexible screw terminal with 8 pins for wires 0.5-2.5 mm²; Transparent and light grey color; Contains 50 pieces.

Time delay auxiliary contact block with 1 NC and 1 NO, featuring screw connection for delayed activation control.

Securely bridge up to five terminals with WAGO 780‑455, a two‑pole insulated cross‑connector designed for terminal blocks. Its compact box‑bridge layout offers reliable isolation and easy installation, ideal for industrial control panels and simplified cable management.

A compact DIN rail terminal block with a 5.2 mm width and 48 mm height, designed for 24‑ampere connections. It supports conductors from 0.14 to 4 mm², operates between –60 °C and 105 °C, and tolerates up to 1000 V.

Blue WDU 6 BL feed‑through terminal block, 8 mm screw connection, 41 A/800 V rating, single row with two clamps, side mounting, UL 94 V0 rated insulation, ideal for DIN rail assemblies.

Yellow WAGO 2000‑1306 feed‑through terminal block offers a compact 3.5 mm width and 58.2 mm height, handling up to 13.5 A at 800 V. It supports three wires with diameters from 0.14 mm to 1.0 mm, ideal for reliable connections in moderate‑temperature environments.