Phoenix contact terminal block | Electrical installation

Compact disconnect terminal block rated for 41 A with a single pole and an 8.2 mm wide connection slot, suitable for 6 mm² conductors; features a secure test disconnect design in durable gray housing.

Compact fuse terminal block (UK 5‑HESI) rated 6.3A, 500V, 10A, with five 30 mm slots and DIN rail mounting. Ideal for low‑current wiring, it supports 0.2–4 mm² conductors in a rugged black enclosure.

PT 2.5-3L is a push-in multi-level terminal block with 5.2mm pitch, suitable for wire sizes 0.14-4mm². Made of grey PIT material by Phoenix Contact. Nominal voltage up to 500V and current capacity up to 20A.

The UTTB 2.5 feed-through terminal block is a double-level component that accommodates up to 24 A of current with a wire cross section of 5.2mm.

The Phoenix Contact PT 2,5 feed-through terminal block is a 5.2mm quick-connect grey terminal with 24A capability designed for reliable connections in various applications.

Feed-through double-level terminal block with 3.5mm connection and 16A current rating, ideal for secure and efficient electrical connections.

The Phoenix Contact UT Fuse Clamp - 3046032 is a G-fuse terminal block with 5x20mm fuses and a current rating of up to 6.3A. It has 6.2mm terminals and is suitable for use in various applications where protection against overcurrent is required.

A robust red plug‑in bridge with a 5.2 mm pitch, accommodating 20 pins for DIN rail terminal blocks. It offers reliable connections up to 500 V and 24 A, featuring a durable plastic housing and secure clamp design for quick assembly.

Secure your DIN rail terminal blocks with the Phoenix Contact D‑MBKKB 2.5 end/partition plate, featuring a robust metal construction and precise cutouts for easy mounting, ensuring reliable isolation and protection of connections.

The UT 6-PE is a green and yellow ground terminal block for 0.2 to 6mm² conductors, with a one-piece design and 8.2mm spacing between terminals. It is suitable for various applications and provides reliable protection against electrical hazards.

The ST 2,5-TWIN is a feed-through terminal block with a screw size of 5.2mm and a current capacity of 24A. Made by Phoenix Contact, it has an item number of 3031241 and comes in a grey color. Its dimensions are 5.2 mm width and 60.5 mm height.

Feed-through terminal block with screw connection, 2 connectors, and 12.2mm size, suitable for AWG 16-4 and 16 mm² nominal cross section applications.

Blue two‑pole feed‑through terminal block, 16 mm wide, accepts conductors from 1.5 mm² to 50 mm². Screw terminals secure the cable, while a sturdy metal body handles up to 125 A for reliable connections.

Blue UT 16 BU feed-through terminal block delivers rugged 76 A through connections across 12.2 mm spacing, designed for reliable DIN rail mounting and tidy wiring in power and control circuits.

High‑current feed‑through terminal block (UKH 95) with 25 mm spacing and a 232 A rating, ideal for robust power connections in industrial and electrical applications.

The Phoenix Contact AKG 16 BU is a robust blue connection terminal block designed for direct mounting, accommodating wire sizes from 1.5 to 16mm². With a current rating of 76A, it ensures reliable electrical connections in various applications, making it an essential component for efficient wiring solutions.

A durable ground terminal block with a 5.2‑mm width and 100.9‑mm height, operating from –60 to +105 °C and rated at 400 V, designed for secure protection conductor connections in industrial setups.

CLIPFIX 15 is an end clamp designed to securely fasten terminal blocks on DIN rails. Made of high-quality plastic, it comes in a set of 50 pieces and is compatible with Phoenix Contact's rail mounting systems.

End/partition plate for terminal blocks, providing a secure and organized connection point.

This feed-through terminal block is designed to provide a reliable connection between conductors in electrical circuits. With a 3.5mm pitch and rated for 17.5A of current, it offers excellent performance and durability.

The Universal Feed-Through Terminal Block UK 10 N features a compact design with a width of 10.2mm, allowing for efficient space utilization in electrical applications. It supports a current rating of 57A and operates effectively within a temperature range of -60 to 105 degrees Celsius, making it suitable for various environments. With a nominal voltage of 800V, this gray terminal block ensures reliable connectivity and performance in diverse wiring setups.

A robust gray feed‑through terminal block with a 6.2 mm screw head, rated for 32 A and supporting conductors from 0.14 to 6 mm². Its compact design fits DIN rails up to 35 mm wide, offering secure, low‑resistance connections in industrial wiring systems.