Work clamp | Electrical installation
Active Filters
Electrical installation
Suggestions for Work clamp | Electrical installation
Wago 221-412 compact clamp terminal, 2X4QMM. Used for wire connections in electrical installations. 100 piece kit. Lever nuts for easy installation.
Wago 221-412 compact clamp terminal, 2X4QMM. Used for wire connections in electrical installations. 100 piece kit. Lever nuts for easy installation.
Wago 221-413 is a compact 3-wire connection terminal for 4mm² cables, suitable for up to 50 installations. It features 3 conductors with operating levers and accommodates cable sizes from 0.14mm² to 4mm².
Schneider Electric XB5AVB4 is a 24V AC/DC red LED pilot lite indicator light with a current rating of 10mA and a voltage range of 12-24V AC/DC.
Siemens 3RV2925-5AB is a power feed terminal with connection clamp, designed for secure and reliable connections in electrical installations. Made by the trusted brand Siemens, this product ensures optimal performance and safety standards.
Siemens 3RV2925-5AB is a power feed terminal with connection clamp, designed for secure and reliable connections in electrical installations. Made by the trusted brand Siemens, this product ensures optimal performance and safety standards.
The Jubileeandreg; Handy pack can be used as a counter point of sale dispenser or mobile stock pack.Jubilee Handy Pack M/S 100 Clips Great Product
Ties manufactured from nylon 66 making them heat resistant over the temperature range -40 degree Celsius to +85 degree Celsius Supplied in handy sized packs Suitable for workshop, garden and home applications
Ideal connection terminal between solid and fine-wired, connection without tools, connection points: 2, rated voltage: 400 V, rated current: 32 A - Colour: grey/orange. Cable diameter: 0.08-2.5 mm² - Can be used e.g. for: blinds, roller shutter or awning
Waterproof Connection: Ensures waterproof connection between the connection cable and the valve - Easy to Attach: The connection is made by pressing a button - Variable Cable Cross Section: Suitable for cables with cross sections from 0.33-1.5 mm² - Scop
The Draper Expert 20931 MMA Welding Earth Lead & Clamp features a 3m length and a 35/50 Dinse-type plug, designed for reliable performance in MMA welding applications.
Hager's K96E busbar terminal is a steel plate connector that can handle up to 400 amps. It has a 70mm² cross-section and comes as a single piece.
Hager's K96E busbar terminal is a steel plate connector that can handle up to 400 amps. It has a 70mm² cross-section and comes as a single piece.
Wago 4mm² EX Compact Connector with Operating Levers - 221-485, 5-conductors, screwless terminal block for 0.2-4mm² wires, suitable for various applications, and can connect multiple conductors simultaneously.
Wago 4mm² EX Compact Connector with Operating Levers - 221-485, 5-conductors, screwless terminal block for 0.2-4mm² wires, suitable for various applications, and can connect multiple conductors simultaneously.
Eaton LS-11-ZB Safety Position Switch is a switch that can be used to control the position of an actuator. It has a rating of 400V and 6A, and is IP66 rated for protection against water and dust.
Eaton LS-11-ZB Safety Position Switch is a switch that can be used to control the position of an actuator. It has a rating of 400V and 6A, and is IP66 rated for protection against water and dust.
Draper 20930 MMA Welding Earth Lead with Dinse Plug, 1.8m - 200A earth lead clamp for welding applications.
Time delay auxiliary contact block with 1NO + 1NC, off delay 0.3-3s, and screw clamp terminals for control applications.
The Testo 770-1 is a versatile TRMS clamp meter designed for measuring AC current and voltage. With its cable-grab clamp design, this handheld multimeter provides accurate measurements in the range of CAT III 1000 V and CAT IV 600 V.
WAGO 222-413 3 conductor terminal block with levers, accommodates wire sizes from 0.08 to 4mm², designed for fast and easy installation of electrical connections in control cabinets and other applications.
A simple flexible and compact 3 pole conductor terminal block for use with solid stranding and flexible cables up to 60mm2 in size - Simple easy and fast push wire installation requires no tools and can be fitted in seconds to stripped cables - Ideal for
Wago 224 Series 3 Pole Loop-in Lighting Connector, white, 05mm - 25mm, for 2x1,0-2,5mm² conductors.
Sold by: 25 - Binding post terminals lever for rigid wires, semi-rigid and flexible - Two test. - Test Plug, two - 40 percent more compact than
WAGO 2273-203 3-Way Compact Push Wire Connector - Pack of 100. Easy and secure connection for up to 3 conductors in a small and versatile design, ideal for junction boxes and various electrical applications.
Model Number :ZBE102 - Package weight: 0.02 kilograms - item package dimensions: 4.2L x5.2Wx5.2H centimeters - Item package quantity: 1.0
Wago 243-808 screwless terminal block connector in red, 50 pieces. Easy to use wire connectors for various applications.
Secure your grounding with the WAGO 285‑137 terminal block, a robust green‑yellow clamp that accepts up to 16 mm² conductors. Its compact design and side labeling slots simplify installation while ensuring reliable protection in any electrical system.
Secure your grounding with the WAGO 285‑137 terminal block, a robust green‑yellow clamp that accepts up to 16 mm² conductors. Its compact design and side labeling slots simplify installation while ensuring reliable protection in any electrical system.
The UTTB 2.5 feed-through terminal block is a double-level component that accommodates up to 24 A of current with a wire cross section of 5.2mm.
CLIPFIX 15 is an end clamp designed to securely fasten terminal blocks on DIN rails. Made of high-quality plastic, it comes in a set of 50 pieces and is compatible with Phoenix Contact's rail mounting systems.
Double-level feed-through terminal block with a 5.2mm pitch and 22A rating for up to 2 wires per pole. Suitable for Phoenix Contact's PTTB 2,5-PV series in grey color with double pole clamp for wire cross-section of 0.14mm² - 4mm².
Discover the WAGO 2002-1407 Ground Terminal Block: A versatile 1-pole terminal block designed for a 5.2 mm pull spring configuration. Rated at 24A and compatible with 2.5mm² wire, this yellow/grey terminal ensures secure connections.
Feed-through terminal block with screw connection, 2 connectors, and 12.2mm size, suitable for AWG 16-4 and 16 mm² nominal cross section applications.
HA 25-53 is a power distribution block with rail mount. It features the Spelsberg 69153301 main tap terminal with 80A capacity.
The Schneider Electric ZB5AZ905 is a specialized assembly tool designed for control circuit devices, allowing for easy and precise installation of fastening nuts on control/indicating devices with a diameter of 22mm.
Filters