Tip it | Router Accessories
This is a professional two-flute straight router cutter by Trend with a diameter of 12mm and a cutting length of 19mm. The blade is made of tungsten carbide and features a 3/8 inch shank, ideal for cutting tasks in woodworking projects.
Trend's 4/80 x 1/2 TCT Two Flute Cutter is designed for use with a router, featuring a 25.4mm diameter and a 37mm length for precision cutting.
Trend Professional 4/50 x 1/2 TCT Two Flute Straight Router Cutter, 19.1mm diameter, 37mm cutting length, for precise and clean cuts in woodworking projects.
10mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials.10mm width ideal for matched inlays, banding and stringing for precision fit.
plunge tip for st
Angle a: 90° - Dimension D: 19 mm - Dimension C: 30 mm - Professional range Tungsten carbide tipped router cutter bits
Top and bottom bearings allows the work to be fed with bottom or top template to prevent tear out on short grain for a premium finish. - 50mm cutting depth for replicating deep profiles cleanly and professional. Double bearing is ideal for router table wo
Blades of cutters can be rotated through 180 degrees to give one new cutting edge. - Professional range Tungsten carbide tipped router cutter bits
The Trend 46/02X1/4TC Professional 1/4" Shank Bearing Guided Trimming Router Cutter is a high-quality tool designed for precision cutting. This 19mm diameter bit has a cutting length of 12mm and features a tungsten carbide tip for increased durability.
12mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials - Easy to calculate width to guide bush offset ratios for quick calculation and marking when used for tem
Trend's two flute straight router cutter is ideal for cutting and grooving, available in 13mm, 20mm, or 1/4 inch sizes.
Trend Professional Two Flute Straight Router Cutter 15.9mm Diameter, 50mm Cutting Length, 1/2" Shank
This is a professional two-flute straight router cutter with a diameter of 15.9mm, cutting length of 50mm and a shank size of 1/2 inch. It features sharp blades that deliver smooth and precise cuts for various woodworking projects.
Two flute straight router cutter with 19.1mm diameter and 50mm length, featuring a 1/2 inch shank and tungsten carbide tips for precise cuts.
Trend Professional Two Flute Straight Router Cutter - a high-quality tool designed for precise cutting and shaping of wood, ideal for various woodworking projects.
The Trend Craft C076X1/4TC Pro 1/4in shank bearing-guided round over router cutter features a 6.3mm radius and two flute carbide tips for precision cutting.
Excellent value for money, offering a range of the most popular cutters for decorative and constructional woodworking. - The set contains three non-bearing cutters comprising 2 straight cutters, 6.3mm and 12.7mm diameter a 45° 'V' groove and three bearin
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo
This tool can be used in abrasive materials such as laminated chipboard.The drill produces pilot holes only.Tungsten carbide tipped version of the popular Trend snappy drill countersink with adjustable short series HSS drill and non marri
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.10mm wide X 25mm cutting depth with bottom cut feature for increased diversity including medium duty shallow morticing.
6mm diameter X 16mm cutting depth ideal for small jointing work, freehand and templated lettering and fine detailing work.Perfect for furniture making, box making modelmaking and other applications where accurate small rebates, slots and grooves
20mm diameter X 25mm cutting depth with two flute Dnamic TCT tips and plunge tip for stopped and plunge cut applications.25mm cut depth for shallower rebates, slots, grooves and mortice applications in hard and softwoods and timber based abrasiv
TUNGSTEN CARBIDE: Each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF - EXCELLENT VALUE: High quality router accessory with long lifespan and cons
This fifty-piece cutter set contains a range of popular Tungsten carbide tipped cutters for a variety of applications. - 1/4-inch shank Diameter. - For softwood, hardwood, chipboard, plywood and MDF. - Set Includes twenty two guided, ten straights and eig
Suitable for various materials such as softwood, hardwood, chipboard, plywood and MDF - Excellent value for money - Supplied in a robust Secure plastic carry case with a handle grip
6.3mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. - Bearing guide can be used with templates with 25mm cut length suitable for trimming work on standard sheet
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 12mm wide X 19.1mm cutting depth Ideal for use with the Trend HINGE/JIG/B for hinge recessing and Trend Euro Cylinder lock jig EC
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/4in sha
Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. - Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. - 1/4in shank, ideal for easy con
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. - 45° 'V' groove profile ideal for false panel work and matchboard grooving details. 1/4n shank for smaller routers and easy contro
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. - 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. - 1/2in shank
10mm diameter X 25mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials. - 10mm width ideal for matched inlays, banding and stringing for precision fit. plunge tip for stopped g
Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.Craft pro range tungsten carbide tipped router cutter bits
Trend Professional 1/2in shank straight router cutter - 10mm diameter twin flute Dnamic carbide tips
10mm diameter X 19mm cutting depth with two flute design for fast clearance and clean cutting performance in timber and abrasive wood based materials.10mm width ideal for matched inlays, banding and stringing for precision fit.
plunge tip for st
The Trend Professional Two Flute Straight Router Cutter is a high-quality, durable cutting tool designed for precision woodworking and metal machining. It features a carbide tip for increased longevity and improved performance.
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. - Self-guiding trimmer with bearings mounted on end of cutter. - For trimming plastic or plywood overlay. - For copy profiling, use the bearing to follow a
25mm diameter X 25mm cutting depth with two flute Dnamic TCT tips and plunge tip for stopped and plunge cut applications. - 25mm cut depth for shallower rebates, slots, grooves and mortice applications in hard and softwoods and timber based abrasive mater
An ideal cutter for bevelling, chamfering and for producing mortar grooves. An approximate 1.0mm flat can be found on the nose of this cutter. - V groove tools are also ideal for use when sign writing and in addition can be used to hide glue lines. - Cutt
Filters