Seagate ZA2000CM10003 internal solid state drive ZA2000CM10003
Seagate (8719706020886) - PC/notebook - Serial ATA III - Data transfer rate: 6 Gbit/s - SSD Capacity: 2000 GB - Depth: 100.3 mm - Height: 7 mm - Width: 70
Stores where to buy this product
Similar products
Seagate ZA2000CM10003 Internal Solid State Drive
The Seagate ZA2000CM10003 is a high‑performance 2 TB internal solid state drive (SSD) designed for both desktop and notebook computers. Built on the latest 3D TLC NAND technology, it delivers fast data access speeds while maintaining excellent reliability and endurance.
Key Specifications
- Capacity: 2000 GB (2 TB)
- Form Factor: 2.5″, compatible with standard laptop and desktop bays
- Dimensions: Width 70.1 mm, Height 7 mm, Depth 100.3 mm
- Weight: 50 g (internal case net weight 1.2 kg)
- Interface: Serial ATA III (SATA 6 Gb/s)
- Read Speed: up to 560 MB/s
- Write Speed: up to 540 MB/s
- Operating Shock Resistance: 1500 G
- TBW (Total Bytes Written): 1170 TB
- S.M.A.R.T. Support: Yes, for health monitoring and predictive failure analysis
- TRIM Support: Yes, ensuring sustained performance over time
- RoHS Compliant: Yes, meeting environmental safety standards
Technology & Performance
The drive utilizes 3D TLC NAND flash memory, which stacks multiple layers of cells vertically to increase storage density without compromising speed. This architecture allows the SSD to achieve high sequential read and write speeds, making it ideal for tasks such as gaming, video editing, large file transfers, and everyday computing.
The SATA III interface provides a maximum theoretical bandwidth of 6 Gb/s (approximately 600 MB/s). The Seagate ZA2000CM10003 fully exploits this bandwidth, delivering near‑maximum throughput for both read and write operations. Its efficient controller firmware ensures low latency and consistent performance even under heavy workloads.
Reliability & Endurance
With a TBW rating of 1170 TB, this SSD is engineered to withstand extensive data writes over its lifespan. The combination of robust NAND technology, advanced error‑correction codes (ECC), and built‑in S.M.A.R.T. monitoring provides long‑term durability and early warning of potential failures.
The drive’s shock resistance of 1500 G guarantees resilience against accidental drops or vibrations, a critical feature for mobile users who carry their laptops between locations.
Operating System Compatibility
- Windows: Fully supported on Windows 10, Windows 8.1, and Windows 7 (both 32‑bit and 64‑bit editions)
- Linux: Compatible with major distributions such as Ubuntu, Fedora, Debian, and CentOS, thanks to native SATA driver support
- Other OS: The drive’s standard firmware ensures compatibility with macOS when used in external enclosures or via SATA adapters.
Installation & Use Cases
The Seagate ZA2000CM10003 is a drop‑in replacement for existing 2.5″ SSDs or HDDs. Its slim 7 mm thickness allows installation in ultrabooks, thin laptops, and compact desktops without requiring additional cooling solutions.
- Gaming: Rapid load times for game assets and quick level transitions.
- Content Creation: Smooth editing of high‑resolution video footage and large media libraries.
- Business & Productivity: Fast boot times, rapid application launches, and efficient data handling for multitasking environments.
- Data Backup & Archiving: Reliable storage for backups with high write endurance.
Security Features
The SSD supports TRIM, which helps maintain performance by allowing the operating system to inform the drive which blocks of data are no longer in use. This reduces fragmentation and prolongs the life of the NAND cells.
Additionally, the drive’s firmware includes built‑in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) capabilities, enabling users and system administrators to monitor health metrics such as temperature, wear level, and error rates in real time.
Environmental & Safety Compliance
The Seagate ZA2000CM10003 meets RoHS (Restriction of Hazardous Substances) standards, ensuring that it contains no hazardous materials such as lead, mercury, or cadmium. This compliance supports responsible disposal and recycling practices.
Conclusion
The Seagate ZA2000CM10003 internal SSD combines substantial storage capacity with high-speed performance, robust durability, and broad operating system support. Whether you’re a gamer seeking lightning‑fast load times, a content creator demanding reliable write endurance, or a professional needing dependable data access on the go, this drive delivers the features and reliability required for modern computing workloads.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Internal SSD (Solid State Drive) |
|
International
Find this product in one of our international stores
|
    136.29 EUR |
| Colors
Predominant colors of the product |
|
| Tags | Seagate BarraCuda SATA III SSD SATA SSD 3D TLC NAND BarraCuda internal drives Seagate SSD Drive health monitoring Drive performance monitoring |
| Identifiers | |
| Brand |  Seagate is a brand of computer hard drives and storage solutions. The company produces a wide range of products for both personal and business use, including external hard drives, solid state drives, and storage systems. Seagate is one of the leading providers of storage solutions in the world, and its products are known for their quality and reliability. |
| ID | 17766743 |
| Dimensions / Weight | |
| Key Features | |
|
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.
|
PC/notebook |
|
Data transfer rate The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.
|
6 Gbit/s |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
100.3 mm |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
7 mm |
|
Interface The physical or logical interface used by a device to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, or similar standards. It indicates the technology that enables data transfer and power delivery between the product and its peripherals.
|
Serial ATA III |
|
Linux operating systems supported List of Linux operating systems that the product is compatible with, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.
|
Yes |
| Master (outer) case net weight | 1.2 kg |
|
Memory type The classification of a device’s memory technology, such as DDR4 SDRAM, GDDR6, or MLC NAND. It indicates the underlying architecture and generation that determines performance characteristics like bandwidth, latency, and power consumption.
|
3D TLC |
| Operating shock | 1500 G |
|
Read speed The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.
|
560 MB/s |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
S.M.A.R.T. support Indicates whether the product supports S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology), a feature that monitors storage device health and predicts failures.
|
Yes |
| SSD Capacity | 2000 GB |
|
SSD form factor The physical form factor indicates the standard size and shape of an SSD, such as M.2, 2.5‑inch, U.2 or mSATA. It helps determine compatibility with motherboards, enclosures and other hardware components.
|
2.5" |
| TBW rating | 1170 |
|
TRIM support Indicates whether the storage device supports the TRIM command, which allows an operating system to inform the drive which blocks of data are no longer considered in use and can be wiped internally. This feature improves performance and longevity on solid‑state drives by enabling efficient garbage collection.
|
Yes |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
50 g |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
70.1 mm |
|
Windows operating systems supported A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.
|
Windows 10,Windows 7,Windows 8.1 |
|
Write speed The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.
|
540 MB/s |
Related articles
