Sharp 70-Inch LCD 4K Ultra HD Touchscreen Digital Signage Flat Panel PN-70HC1E Black

This product is cataloged in our store in these categories

Find this product in one of our international stores

Predominant colors of the product

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

The linear measurement of the outer edge or frame surrounding a display, screen, or other product component, expressed in millimetres or inches. It indicates how wide the bezel is from one side to the other and helps customers assess fit, aesthetics, and compatibility with mounting brackets or protective cases.

The linear measurement of the bottom edge of a display or device’s bezel, expressed in millimetres or inches. It indicates how wide the lower frame is from one side to the other and helps customers assess fit, compatibility with mounting brackets, and overall design aesthetics.

The total number of integrated speaker units present in the product. This value indicates how many separate speaker elements are built into the device, helping users compare audio capabilities across models.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The amount of light emitted per unit area from a display surface, measured in candela per square meter (cd/m²). It indicates how bright the screen will appear under typical viewing conditions and allows users to compare brightness levels across devices.

The total count of distinct colours that a display can render, typically expressed as a numeric value (e.g., 16.78 million). This attribute indicates the colour depth and richness of the visual output; higher numbers generally mean more accurate and vibrant images.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of display panel used in a visual device, such as LED‑backlit LCD, IPS, TN, VA, OLED, or AMOLED. It indicates the underlying technology that determines image quality, color accuracy, viewing angles, response time and power consumption.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

The amount of thermal energy a product can dissipate, expressed in a standard unit such as BTU per hour or watts. It indicates the cooling requirement and helps compare how much heat the device generates during operation.

The type of LED backlighting used in a display panel, such as Direct‑LED, Edge‑LED, Full‑Array or other LED configurations. It indicates how the light source is arranged behind the screen to provide illumination and uniformity.

The proportion between the width and height of a screen or image, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios and helps users match devices to their media formats.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

Indicates the preferred or supported orientation of a product, such as landscape, portrait, horizontal/vertical, or other directional settings. This attribute helps users understand how the device can be positioned for optimal use.

The pair of horizontal and vertical dimensions in millimetres that a product supports for VESA mounting (e.g., "100 × 100 mm"). This value indicates the exact hole spacing required by a mounting bracket to secure the device. It is used for monitors, TVs, projectors and other display equipment that can be wall‑mounted or attached to stands.

A list of the positions or mounting options where a product can be installed, such as indoor, outdoor, wall, desk, floor, ceiling, or universal. Each value represents a distinct placement scenario that the device supports.

The primary purpose of a product, indicating its main intended use or target market segment (e.g., "Gaming", "Office", "Travel"). It helps customers quickly identify whether the item matches their needs and can be used for filtering or categorization across different product categories.

The root‑mean‑square (RMS) power rating of a device, expressed in watts (W). It represents the average electrical power that the product can deliver or consume under normal operating conditions.

Indicates whether the product is compatible with other devices or accessories. A value of "Yes" means the item can be used together with the referenced device or accessory, while "No" indicates incompatibility.

Represents how many VGA (D‑Sub) connectors are available on the product for video input. The value is a simple integer indicating the total count of VGA ports, regardless of version or additional features.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.