Super Micro MBD-X11SAT-O Network Server
SUPER MICRO (0672042211999 / X11SAT-O) - ACPI version: 4.0 - DVI-D ports quantity: 1 - Number of DIMM slots: 4 - Number of SATA III connectors: 6 - USB 2
Stores where to buy this product
Similar products
Super Micro MBD‑X11SAT‑O Network Server – Technical Overview
The Super Micro MBD‑X11SAT‑O is a high‑performance ATX motherboard engineered for server and workstation environments that demand robust processing, reliable memory support, and versatile connectivity. Built around the Intel® C236 chipset, it delivers a blend of power efficiency, expandability, and enterprise‑grade features.
Form Factor & Physical Dimensions
The board adheres to the standard ATX form factor with dimensions of 305 mm × 224 mm. Its compact footprint makes it suitable for a wide range of chassis, from full‑size server cases to more space‑constrained workstations.
Processor Compatibility & Socket
Designed exclusively for the LGA 1151 (Socket H4), the MBD‑X11SAT‑O supports Intel’s E3‑1200 v5/v6 Xeon series, as well as 6th and 7th generation Core i7/i5/i3/Pentium/Celeron processors. This single‑processor configuration ensures streamlined thermal management and simplified system design.
Memory Architecture
- Maximum memory capacity: 64 GB across four DDR4‑SDRAM DIMM slots.
- Supported memory speeds: 1600, 1866, and 2133 MHz.
- Memory voltage: 1.2 V.
- ECC support: Yes – the board can operate with ECC memory modules for error detection and correction, enhancing data integrity in critical applications.
SATA & Storage Connectivity
The motherboard offers six Serial ATA III (SATA 3) connectors, each capable of 6 Gb/s transfer rates. This allows for flexible storage configurations, including RAID setups and high‑capacity drives.
RAID Capabilities
With built‑in support for RAID levels 1, 5, and 10, the MBD‑X11SAT‑O enables robust data protection and performance optimization. The RAID controller is integrated into the chipset, providing reliable hardware acceleration without additional expansion cards.
Networking & Ethernet
The board features two Gigabit Ethernet (RJ‑45) ports, delivering high‑throughput network connectivity for server workloads, virtualization, and data center applications. The dual LAN configuration also supports link aggregation for increased bandwidth and redundancy.
Graphics & Display Output
An onboard Aspeed AST2400 graphics controller provides a single DVI‑D port, sufficient for basic management interfaces or low‑resolution display requirements. While not intended for high‑end gaming or graphic design, it satisfies the needs of most server environments.
USB & Peripheral Interfaces
- USB 3.2 Gen 1 (A type): 2 ports – offering fast data transfer for external storage and peripherals.
- USB 3.2 Gen 2 (C type): 1 port – enabling high‑speed connectivity with modern devices.
- USB 2.0: 4 ports – ensuring compatibility with legacy hardware.
Security & Compliance Features
- TPM connector: Yes – supports Trusted Platform Module integration for secure key storage and platform integrity verification.
- RoHS compliant: Yes – the board meets environmental regulations, reducing hazardous material usage.
Power Management & Thermal Design
The motherboard is rated at a 95 W thermal power limit, balancing performance with efficient cooling. Its design incorporates robust voltage regulation and heat dissipation pathways to maintain stable operation under load.
BIOS & Firmware
- BIOS type: AMI.
- BIOS memory size: 16 Mbit.
- ACPI version: 4.0 – ensuring modern power management and system integration features.
Data Integrity & Reliability
The board’s E3‑1200 processor support, combined with ECC memory capability and RAID functionality, makes it a dependable choice for mission‑critical workloads where data integrity is paramount. The integrated error checking mechanisms help detect and correct single‑bit errors in both memory and storage.
Conclusion
The Super Micro MBD‑X11SAT‑O Network Server delivers a comprehensive set of features tailored for enterprise server deployments and high‑performance workstations. Its combination of Intel chipset power, ECC memory support, dual Gigabit Ethernet, RAID options, and extensive peripheral connectivity positions it as a versatile platform capable of meeting demanding computing needs while maintaining reliability and efficiency.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
|
|
International
Find this product in one of our international stores
|
 460.16 EUR   |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand | SUPER MICRO Supermicro is a brand of high-end servers and storage devices. The company is known for its high quality and reliability, as well as its innovative designs. Supermicro servers are used by some of the world's largest companies, and the brand is considered a top choice for data centers and other mission-critical applications. |
| MPN | SUPER MICRO X11SAT-O |
| ID | 17849857 |
| Dimensions / Weight | |
| Key Features | |
|
ACPI version The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.
|
4.0 |
| BIOS memory size | 16 Mbit |
|
BIOS type The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.
|
AMI |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
224 mm |
|
DVI-D ports quantity Represents how many DVI‑D connectors are present on the product. The value is a simple integer indicating the total count of DVI‑D ports, regardless of version or internal/external placement.
|
1 |
|
ECC Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.
|
Yes |
|
ECC supported by processor Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.
|
Yes |
|
Ethernet interface type A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.
|
Gigabit Ethernet |
|
Ethernet LAN Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.
|
Yes |
|
HDD interface List of the physical interface(s) used by a hard drive together with the number of bays it occupies, such as "2 x SATA (2 x Bay)" or "1 x M.2 PCIe". This attribute helps users determine both the connection type and how many drives can be installed in an enclosure or system.
|
Serial ATA III |
|
Intel Xeon series The specific model identifier of an Intel Xeon processor, such as E5‑2600 or E3‑1200. This value allows users to determine compatibility with motherboards, operating systems, and other hardware components.
|
E3-1200 |
|
Maximum internal memory The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.
|
64 GB |
|
Memory voltage The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.
|
1.2 V |
|
Motherboard chipset The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.
|
Intel® C236 |
|
Motherboard form factor The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.
|
ATX |
|
Number of DIMM slots The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.
|
4 |
|
Number of SATA III connectors The total count of physical SATA III (Serial ATA Revision 3) ports available on a product. It indicates how many internal connections can be used to attach storage devices such as hard drives or solid‑state drives that support the SATA III interface.
|
6 |
|
On-board graphics adapter model The model name or number of the integrated graphics adapter built into a device, such as a laptop or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.
|
Aspeed AST2400 |
|
Processor manufacturer The company that designs and produces the central processing unit (CPU) used in a device. This value identifies the brand of the processor, such as Intel, AMD, Qualcomm, or ARM Holdings, allowing users to assess compatibility, performance expectations, and support resources.
|
Intel |
|
Processor socket The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.
|
LGA 1151 (Socket H4) |
|
RAID levels A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.
|
1,5,10 |
|
RAID support A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.
|
Yes |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Supported memory clock speeds The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.
|
1600,1866,2133 MHz |
|
Thermal power The amount of electrical power, expressed in watts (W), that a device consumes or is designed to dissipate as heat during normal operation. It represents the typical energy draw of the product and can be used to estimate operating costs, compare efficiency, or assess cooling requirements.
|
95 W |
|
TPM connector Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.
|
Yes |
|
USB 2.0 ports quantity Represents the count of external USB 2.0 (high‑speed) connectors available on a device. The value is an integer indicating how many USB 2.0 ports can be used for data transfer or power delivery from the outside of the product, regardless of internal placement or version.
|
2 |
|
Wi-Fi Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.
|
No |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
305 mm |
Related articles
