Supermicro SYS-5019S-ML Super Server Rack-Mountable 1-Way 1U Server
Supermicro (0672042204083 / SYS-5019S-ML) - AC input frequency: 50 - 60 Hz - AC input voltage: 100 - 240 V - Input current: 1.8 - 4.2 A - ACPI version: 2
Stores where to buy this product
Sponsored This site contains affiliate links for which we may receive compensation. More information
This product has not been found in any sponsored store recently, please check similar products from our sponsors or review other stores we offer where you may find the product.
Similar products
Supermicro SYS‑5019S‑ML Super Server Rack‑Mountable 1‑Way 1U Server
The Supermicro SYS‑5019S‑ML is a compact, high‑performance server designed for demanding enterprise and data‑center environments. Built around the Intel® C236 chipset and supporting the latest Intel Xeon E3 series processors, this 1U rack‑mountable platform delivers exceptional compute power while maintaining an ultra‑low profile.
Form Factor & Physical Dimensions
- Chassis type: Rack (1U)
- Height: 43 mm
- Width: 437 mm
- Depth: 366 mm
- Weight: 3.83 kg
- Fan diameter: 4 cm (two 4‑cm fans for efficient airflow)
Processor & Motherboard Architecture
- Compatible processor series: Intel® Core™ i3 and Intel Xeon E3‑1200 family
- Processor socket: LGA 1151 (Socket H4)
- Number of processors supported: 1
- Motherboard chipset: Intel® C236, providing robust I/O and storage connectivity.
- BIOS features: PCI 2.2, SMBIOS 2.3, AMI BIOS with 64 Mbit memory size.
Memory & Storage Capacity
- Maximum internal memory: 64 GB DDR4‑SDRAM
- Number of DIMM slots: 4 (288‑pin, 1.2 V)
- Memory bus width: 72 bit with ECC support for data integrity.
- Supported storage drive interfaces: Serial ATA III
- Number of SATA III connectors: 2 (supports up to two 3.5" drives)
- RAID levels supported: 0, 1, 5, 10 – enabling flexible data protection and performance configurations.
Networking & Connectivity
- Ethernet LAN: Intel® I210‑AT controller with dual ports (Fast Ethernet + Gigabit).
- Data rates: 10, 100, 1 000 Mbit/s.
- Copper ethernet cabling technology: 10BASE‑T, 100BASE‑TX, 1000BASE‑T.
- On‑board graphics adapter: Aspeed AST2400 for remote management and console access.
- USB ports: 2 × USB 2.0 for peripheral connectivity.
- VGA (D‑Sub) port: 1 for legacy display support.
Power & Energy Efficiency
- AC input voltage: 100 – 240 V, frequency: 50 – 60 Hz.
- Input current: 1.8 – 4.2 A.
- Power supply: 350 W with 80 PLUS Platinum certification – ensuring high efficiency and low power consumption.
- RoHS compliance: Yes, meeting strict environmental standards.
Thermal Management & Health Monitoring
- Number of fans: 2 (4 cm each) for optimal airflow in a tight 1U space.
- PC health monitoring: Real‑time status on CPU, fan speed, LED indicators, temperature, and voltage.
- LED indicators: HDD, Network, Power, Reset, Status, Temperature – providing instant visual diagnostics.
Additional Features & Build Quality
- On/off switch: Yes, for convenient power cycling.
- Keyboard included: Yes, facilitating local configuration and troubleshooting.
- Non‑ECC memory support: No – the system is designed exclusively for ECC DDR4 to guarantee data reliability.
- PCI Express slots: 1 × PCIe 3.0 x8 slot for expansion cards such as additional NICs or storage controllers.
Use Cases & Deployment Scenarios
The Supermicro SYS‑5019S‑ML excels in environments where space is at a premium but performance cannot be compromised. Typical deployment scenarios include:
- Virtualization hosts: Running multiple virtual machines with Intel Xeon E3 processors and ECC memory ensures high throughput and data integrity.
- Edge computing nodes: Compact form factor and low power draw make it ideal for distributed edge deployments requiring local processing.
- High‑density storage gateways: Dual SATA III ports combined with RAID support allow the server to function as a cost‑effective, high‑performance storage gateway.
- Remote management platforms: Built‑in Aspeed AST2400 graphics and robust network interfaces facilitate out‑of‑band management for large data centers.
Conclusion
The Supermicro SYS‑5019S‑ML Super Server Rack‑Mountable 1‑Way 1U Server represents a blend of compact design, powerful Intel Xeon architecture, and comprehensive feature set. Its ECC memory support, dual Ethernet ports, RAID capabilities, and energy‑efficient power supply make it an excellent choice for enterprises seeking reliable performance in a tight rack space.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Servers |
|
International
Find this product in one of our international stores
|
 |
| Colors
Predominant colors of the product |
|
| Identifiers | |
| Brand |  Supermicro is a brand of computer hardware, specializing in motherboards, servers, and storage devices. The company was founded in 1993 and is headquartered in San Jose, California. Supermicro products are used in a variety of industries, including cloud computing, big data, data center, and high performance computing. |
| Model | Supermicro SYS-5019S-ML |
| MPN | Supermicro SYS-5019S-ML |
| ID | 14916926 |
| Dimensions / Weight | |
| Key Features | |
|
AC input frequency The frequency of the alternating current supplied to the device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.
|
50 - 60 Hz |
|
AC input voltage The alternating current voltage range that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device.
|
100 - 240 V |
|
ACPI version The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.
|
2.0 |
|
BIOS features A comma‑separated list of features, options and capabilities provided by the system firmware (BIOS/UEFI). Typical entries include support for UEFI, legacy BIOS, SMBIOS versions, ACPI, IPMI, WfM, dual‑BIOS, BIOS Flashback, Wake‑On‑LAN, and other firmware‑level functionalities. The list helps users understand boot options, compatibility, security features and update mechanisms available on the device.
|
PCI 2.2,SMBIOS 2.3 |
| BIOS memory size | 64 Mbit |
|
BIOS type The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.
|
AMI |
|
Certification A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
|
80 PLUS Platinum |
|
Chassis type The physical configuration or shape of a computer chassis, such as tower, rack‑mount (e.g., 1U, 2U), desktop, mini‑PC, or other compact designs. It indicates the overall size and mounting style that determines compatibility with motherboards, power supplies, and case accessories.
|
Rack (1U) |
|
Compatible processor series List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.
|
Intel® Core™ i3 |
|
Copper ethernet cabling technology A comma‑separated list of the copper Ethernet standards supported by a device, such as 10BASE‑T, 100BASE‑TX, or 1000BASE‑T. Each entry indicates a specific speed and physical specification that the product can transmit over its RJ‑45 ports.
|
10BASE-T,100BASE-TX,1000BASE-T |
|
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
|
366 mm |
|
ECC Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.
|
Yes |
|
Ethernet interface type A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.
|
Fast Ethernet,Gigabit Ethernet |
|
Ethernet LAN Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.
|
Yes |
|
Fan diameter The linear measurement across the widest part of a fan, expressed in units such as millimeters (mm), centimeters (cm) or inches (in). It represents the overall width of the fan and is useful for determining fit, compatibility with cases, and airflow characteristics.
|
4 cm |
|
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
|
43 mm |
|
Input current The electrical current that a device draws from its power source, expressed in amperes (A). It indicates how much current the product consumes during normal operation and helps determine compatibility with power supplies or USB ports.
|
1.8 - 4.2 A |
|
Intel Xeon series The specific model identifier of an Intel Xeon processor, such as E5‑2600 or E3‑1200. This value allows users to determine compatibility with motherboards, operating systems, and other hardware components.
|
E3-1200 |
|
Keyboard included Indicates whether a keyboard is supplied with the product as part of its standard package. A value of "Yes" means a keyboard is included, while "No" indicates it is not provided and must be purchased separately.
|
Yes |
|
LAN controller The specific model or designation of the LAN (network) controller integrated into a device, such as "Intel I219-V" or "Realtek RTL8111H." This value identifies the exact network interface hardware used for Ethernet connectivity, enabling users to compare performance, compatibility, and support across products.
|
Intel® I210-AT |
|
LED indicators A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.
|
HDD,Network,Power,Reset,Status,Temperature |
|
Memory bus The width of the memory bus, expressed in bits. It indicates how many data lines are available for transferring information between the processor and memory modules at once, affecting overall memory bandwidth.
|
72 bit |
|
Memory form factor The physical configuration or size classification of a memory module, such as SO‑DIMM, UDIMM, RDIMM, or on‑board. It indicates the form factor that determines compatibility with motherboards and other hardware components.
|
288-pin DIMM |
|
Memory voltage The electrical voltage required by the RAM modules of a device, expressed in volts (V). It indicates the operating supply voltage that the memory needs to function correctly and safely.
|
1.2 V |
|
Motherboard chipset The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.
|
Intel® C236 |
|
Non-ECC Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.
|
No |
|
Number of fans The total count of fan units included in the product. This value indicates how many separate fans are present, which can affect cooling performance and noise levels.
|
2 fan(s) |
|
On-board graphics adapter model The model name or number of the integrated graphics adapter built into a device, such as a laptop or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.
|
Aspeed AST2400 |
|
On/off switch Indicates whether the product includes an on/off switch that allows the user to power it on or off manually.
|
Yes |
|
PC Health Monitoring A list of hardware components that the system tracks to monitor their operational status and performance. Typical entries include CPU, fan, temperature sensors, voltage regulators, power supply units, and other critical subsystems. The list helps users understand which parts are being monitored for health alerts or performance metrics.
|
CPU,FAN,LED,Temperature,Voltage |
|
PCI Express slots version The version of the PCI Express specification supported by a device or component. It indicates the maximum bandwidth and compatibility with PCIe devices such as graphics cards, storage controllers, and expansion cards. The value is typically expressed as a numeric revision (e.g., 2.0, 3.0, 4.0) but may also include descriptive labels for specific generations.
|
3.0 |
|
Power supply The electrical power consumption or output of the product, expressed in watts (W). It indicates how much energy the device uses during operation or how much power it can deliver to connected equipment.
|
350 W |
|
Processor family The processor family identifies the group or series of CPU models that share a common architecture, design, and performance characteristics. It helps users compare processors across brands and generations by indicating the underlying technology used in the chip.
|
Intel |
|
Processor socket The physical connector used by a processor to attach to a motherboard or other compatible platform. Common examples include LGA 1151, BGA 1440, Socket AM4, and LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility.
|
LGA 1151 (Socket H4) |
|
RAID levels A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.
|
0,1,5,10 |
|
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.
|
Yes |
|
Storage drive sizes supported A list of the physical sizes and types of storage drives that a product can accommodate, such as 2.5‑inch, 3.5‑inch, or M.2. The values are typically separated by commas and may include additional descriptors like "M.2" to indicate an internal solid‑state drive interface.
|
3.5" |
|
Supported storage drive interfaces List of physical or logical interfaces that allow an internal storage drive to communicate with the system, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.
|
Serial ATA III |
|
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
|
3.83 kg |
|
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
|
437 mm |
Related articles
Supermicro (0672042309085 / SYS-4029GP-TRT2) - 80 PLUS certification: 80 PLUS Titanium - Form factor: 5U - Number of fans: 8 fan(s) - Weight: 65.5 lbs (29.7 kg) - AC input frequency: 50 - 60 Hz - AC input voltage: 100 - 240 V