V24720085 Sensor
autodoc.co.uk Similar products
VEMO V24-72-0085 Sensor
The VEMO V24-72-0085 Sensor is a high‑performance camshaft position sensor designed for the Alfa Romeo 147, GT, and 156 models. It delivers precise ignition timing signals to the engine control unit (ECU), ensuring optimal combustion efficiency, reduced emissions, and reliable engine start-up.
Key Functionalities
- Camshaft Position Detection: Measures the exact position of the camshaft with high accuracy, enabling the ECU to synchronize ignition events precisely.
- Ignition Pulse Generation: Generates a reliable ignition pulse that triggers spark plugs at the correct engine cycle.
- High Signal Integrity: Utilizes advanced magnetic sensor technology to maintain signal clarity even under harsh automotive conditions.
- Robust Construction: Built with durable materials to withstand temperature extremes, vibration, and corrosive environments typical of automotive engines.
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | V24-72-0085 |
| Application | Alfa Romeo 147, GT, 156 (Sportwagon) |
| Signal Type | Digital pulse output |
| Operating Temperature | -40 °C to +120 °C |
| Voltage Range | 5 V DC (typical) |
| Signal Frequency | Up to 20 kHz |
| Mounting Type | Standard camshaft bracket |
| Dimensions | Approx. 30 mm × 25 mm × 15 mm |
| Weight | ~50 g |
Compatibility Overview
The sensor is engineered to fit the following Alfa Romeo engine families:
- 147 (Alfa Romeo 147) – Front‑wheel drive, 1.6 L and 2.0 L engines.
- GT (Alfa Romeo GT) – Mid‑engine sports coupe with 1.8 L and 2.0 L variants.
- 156 (Alfa Romeo 156 Sportwagon) – Front‑wheel drive sedan, 1.6 L and 2.0 L engines.
For each model, the sensor interfaces with the ECU via a standard 3‑wire connector: signal, power, and ground. It is fully compatible with both original equipment (OE) and aftermarket engine management systems that support camshaft position input.
Installation Guide
- Disconnect Battery: Ensure the vehicle’s battery is disconnected to prevent accidental short circuits.
- Remove Old Sensor: Locate the existing camshaft sensor on the engine block. Use a suitable socket or wrench to unscrew it carefully.
- Clean Mounting Surface: Wipe the mounting area with a clean, lint‑free cloth and apply a thin layer of anti‑seize compound if recommended by the manufacturer.
- Position New Sensor: Align the V24-72-0085 sensor with the camshaft bracket. Ensure the magnetic face is correctly oriented toward the camshaft gear teeth.
- Screw Securely: Tighten the mounting bolt to the specified torque (typically 12–15 Nm). Avoid over‑tightening, which could damage the sensor housing.
- Connect Wiring Harness: Attach the three connector pins—signal, power, and ground—to their corresponding terminals. Verify proper seating before proceeding.
- Reconnect Battery: Reattach the battery terminals and restore power to the vehicle.
- ECU Calibration Check: Start the engine and monitor the ECU’s diagnostic readout for camshaft position confirmation. A stable signal indicates correct installation.
Performance Benefits
- Improved Fuel Efficiency: Accurate timing reduces fuel consumption by up to 2 % in typical driving conditions.
- Lower Emissions: Precise ignition control helps meet stringent emission standards, especially for Euro 5 and Euro 6 compliance.
- Enhanced Engine Longevity: Consistent spark timing minimizes wear on pistons, valves, and combustion chambers.
- Reliable Start‑Up: The sensor’s robust signal ensures the engine starts smoothly even in cold weather or high altitude environments.
Maintenance Tips
Although the V24-72-0085 is designed for long life, periodic checks can prevent unexpected failures:
- Visual Inspection: Every 20,000 km, inspect the sensor housing and wiring for cracks or corrosion.
- Signal Verification: Use an oscilloscope or diagnostic scanner to confirm pulse integrity during routine maintenance.
- Connector Cleanliness: Keep connector pins free from oil or dirt; use a contact cleaner if necessary.
Frequently Asked Questions
Q: Can I use this sensor in other Alfa Romeo models?
A: The V24-72-0085 is specifically calibrated for the 147, GT, and 156 series. Using it in non‑compatible engines may result in incorrect timing signals.
Q: Does the sensor require any special calibration after installation?
A: No additional calibration is needed if the ECU recognizes the camshaft position signal. However, a diagnostic scan can confirm proper operation.
Q: What should I do if the engine stalls after installing this sensor?
A: Verify that the sensor’s power and ground connections are secure, and check for any wiring damage. If the issue persists, consult an automotive electrician.
Conclusion
The VEMO V24-72-0085 Sensor is a critical component that ensures your Alfa Romeo’s engine runs with optimal timing and efficiency. Its precise camshaft position detection, durable construction, and straightforward installation make it an essential upgrade for maintaining performance and reliability in the 147, GT, and 156 models.
This product in Comparor
Identifiers
Vemo is a brand that specializes in making watches. They make a wide variety of watches, from sporty to dressy, and everything in between. Their watches are known for their high quality and stylish designs.
