Alphacool 1013982 Eisbaer LT360mm CPU AIO Water Cooling Unit - Black

Alphacool Eisbaer LT360mm CPU AIO Water Cooling Unit – Black

The Alphacool Eisbaer LT360mm is a high‑performance, all‑in‑one (AIO) liquid cooling solution designed to keep your processor running at optimal temperatures while delivering quiet operation. With its 360 mm radiator and triple 120 mm fans, this unit offers exceptional heat dissipation for demanding workloads and overclocking scenarios.

Key Design Features

• Radiator Size: 360 mm (120 × 390 × 25 mm) – the largest standard AIO radiator available, providing ample surface area for heat transfer.
• Material Construction: Copper fins and tubes ensure superior thermal conductivity compared to aluminum alternatives.
• Fan Configuration: Three 120 mm Eiswind fans with sleeve bearings, each capable of up to 1700 rpm.
• Pump Design: Integrated pump with a 3‑pin and optional 4‑pin PWM connector for flexible power management.
• Air Pressure: Up to 1.66 mm H₂O, allowing efficient airflow through dense fin stacks.
• Noise Level: Maximum of 29 dBA, ensuring a quiet computing environment even under load.

Thermal Performance

The combination of copper construction and high air pressure fans results in an impressive airflow of up to 108 m³/h (63.85 CFM). This translates into effective cooling for CPUs with power ratings ranging from 4 W to well over 200 W, making it suitable for both mainstream and enthusiast builds.

Compatibility & Mounting

The Eisbaer LT360 supports a wide array of processor sockets, including:

• LGA1150, LGA1151, LGA1155, LGA1156, LGA1366, LGA2011, LGA2011‑3, LGA2066
• Socket 604, Socket 755, Socket 771, Socket 775, Socket 939, Socket 940
• AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+
• G34 and other legacy sockets

All mounting hardware is included. For certain motherboards with limited screw holes (e.g., some LGA2011‑3 boards), the screws should not be tightened beyond 4 mm to avoid damage.

Installation & Setup

1. Mounting: Attach the mounting bracket to your motherboard using the supplied screws. Ensure proper alignment with the CPU socket.
2. Pump Connection: Connect the 4‑pin PWM cable from the pump to a compatible header on your motherboard for automatic fan speed control.
3. Fan Wiring: Each of the three fans has a 3‑pin connector; connect them to the radiator or use a fan hub if you prefer separate control.
4. Thermal Paste: The unit includes high‑quality thermal interface material (TIM). Apply a pea‑size amount on the CPU before mounting the cooler.
5. Fill Port: If you wish to refill or replace coolant, use the dedicated 3‑pin fill port. Standard distilled water or pre‑mixed coolant can be used.

Performance Metrics

Why Choose the Eisbaer LT360?

• Unmatched Cooling: The 360 mm radiator and copper construction deliver superior heat removal, keeping CPUs cool even under sustained high loads.
• Quiet Operation: With a maximum noise level of only 29 dBA, the unit remains almost inaudible during normal use.
• Versatile Compatibility: Supports an extensive list of sockets, making it suitable for both older and newer platforms.
• Easy Installation: All necessary hardware is included, and the design simplifies mounting on a wide range of motherboards.
• Future‑Proofing: The robust build quality and high airflow capacity ensure longevity as CPU power demands increase.

Conclusion

The Alphacool Eisbaer LT360mm CPU AIO Water Cooling Unit – Black stands out as a premium choice for enthusiasts seeking maximum cooling performance without compromising on noise levels. Its copper radiator, triple fan setup, and extensive socket compatibility make it an ideal solution for both overclocking and everyday high‑performance computing.