23.47 USD
StarTech.com 1 Port PCI Express IDE Controller Adapter Card - Storage controller - ATA - 133 MBps - PCIe x1 (PEX2IDE)
StarTech.com's 1 Port PCI Express IDE Controller Adapter Card allows for the connection of an IDE storage device to a computer via a PCIe slot, providing increased storage capacity and faster transfer speeds up to 133 MBps
Stores where to buy this product
Other stores where to find this product
dealcenterllc.com
Similar products
StarTech.com 1 Port PCI Express IDE Controller Adapter Card
The StarTech.com 1 Port PCI Express IDE Controller Adapter Card (PEX2IDE) is a compact, high‑performance interface solution that bridges modern PCIe x1 slots to legacy ATA/IDE devices. Designed for both desktop and workstation environments, this adapter enables the integration of older hard drives, optical drives, or other IDE peripherals into contemporary systems without compromising on speed or reliability.
Key Technical Specifications
- Interface: PCI Express x1 (PCIe 2.0/3.0 compatible)
- IDE Compatibility: Supports both ATA and IDE signals, including UDMA/133 (Ultra DMA mode 6) for maximum throughput.
- Data Transfer Rate: Up to 133 MB/s, matching the highest standard UDMA speed available on legacy devices.
- Signal Integrity: Built with high‑quality differential pairs and shielding to minimize noise, ensuring stable operation even in electrically noisy environments.
- Form Factor: Standard PCIe x1 card dimensions (approximately 230 mm × 165 mm × 42 mm), making it compatible with most ATX, micro‑ATX, and mini‑ITX motherboards.
- Power Requirements: Draws power directly from the PCIe slot; no additional external power connectors are necessary.
Design Features & Build Quality
The adapter incorporates a rugged, metal chassis that protects internal components and provides excellent thermal dissipation. The board layout is engineered for minimal signal path lengths, reducing latency and enhancing data integrity. A dedicated IDE/ATA connector on the rear panel offers straightforward cable management, while the front edge of the card features a small, low‑profile LED indicator that illuminates when the device is powered.
Operating System & Driver Support
The PEX2IDE adapter is fully compatible with all major operating systems that support standard IDE controllers. This includes:
- Windows: Windows 10, Windows 8/8.1, Windows 7, Windows Server 2008 R2, Windows Server 2012
- Linux: Kernel versions 3.x and newer automatically detect the adapter; no additional drivers are required.
- macOS: Supported via standard Apple ATA/IDE interfaces on compatible hardware.
No proprietary firmware or driver installation is necessary, allowing for plug‑and‑play deployment in both new builds and legacy system upgrades.
Use Cases & Applications
- Legacy Drive Integration: Connect older SATA/IDE hard drives to modern motherboards without the need for external enclosures.
- Optical Drive Replacement: Replace aging CD/DVD/Blu‑ray drives with newer models while maintaining compatibility with existing BIOS setups.
- Embedded Systems: Ideal for industrial PCs, thin clients, or kiosk solutions where space is at a premium but legacy storage access is required.
- Data Recovery & Forensics: Provides a reliable interface for accessing data on aging drives during recovery operations.
Installation Guide
- Power down the computer and disconnect all cables.
- Open the case and locate an available PCIe x1 slot.
- Insert the PEX2IDE adapter firmly into the slot, ensuring it is fully seated.
- Connect the IDE/ATA cable from the legacy device to the rear connector on the adapter.
- Reconnect power and close the case.
- Power on the system; the operating system should automatically recognize the new controller and any connected devices.
Performance & Reliability
By leveraging PCIe’s high‑bandwidth, low‑latency architecture, the adapter delivers consistent performance that matches or exceeds the capabilities of older parallel ATA controllers. The UDMA/133 mode ensures that data transfer rates remain at the maximum supported by legacy devices, providing a smooth experience for both read and write operations.
Conclusion
The StarTech.com 1 Port PCI Express IDE Controller Adapter Card (PEX2IDE) is an essential tool for anyone needing to bridge the gap between modern computing platforms and legacy storage technologies. Its robust design, straightforward installation, and broad operating system support make it a reliable choice for both hobbyists and professionals alike.
| This product in Comparor | |
|---|---|
|
Category
This product is cataloged in our store in these categories
|
- Adapters for computer products |
|
International
Find this product in one of our international stores
|
This product has not been found in other countries
|
| Colors
Predominant colors of the product |
|
| Alternative searches | ATA controller card PATA controller card SIIG IDE controller card Acbel IDE controller card IDE to PCI Express adapter PCI Express to IDE adapter Vantec IDE controller card ATA-133 IDE controller card Ableconn IDE controller card IO Crest IDE controller card One-port IDE controller card StarTech IDE controller card One-port PATA controller card PCI Express to ATA controller PCI Express to PATA controller One-channel IDE controller card PCI Express IDE controller card PCI Express storage controller card Lycom PCI Express IDE controller card Delock PCI Express IDE controller card Inateck PCI Express IDE controller card StarTech PCI Express IDE controller card |
| Identifiers | |
| Brand | StarTech Startech is a brand that specializes in computer and electronic accessories. They make a wide range of products, from cables and adapters to docking stations and external hard drives. Their products are known for their quality and durability, and they offer a wide range of options to suit a variety of needs. |
| Model | StarTech PEX2IDE |
| MPN | StarTech PEX2IDE |
| ID | 36996918 |
| Dimensions / Weight | |
| Key Features | |
Related articles
