ABS 18280 Brake DISCS

ABS 18280 Brake Discs

The ABS 18280 Brake Disc is a high‑performance braking component engineered for rear suspension systems of modern front‑wheel drive vehicles. Designed with precision machining and advanced material composition, this disc delivers consistent stopping power, superior heat dissipation, and long‑term durability under demanding driving conditions.

Key Technical Specifications

• Diameter: 262 mm (10.31 in)
• Thickness: 10 mm (0.39 in)
• Bore Diameter: 114.3 mm (4.50 in) – full‑filled
• Weight: Approximately 1.2 kg (2.64 lb) per disc
• Material: High‑strength cast iron alloy with a thermal‑conductive surface finish
• Heat Dissipation: Optimized venting and ribbing for rapid heat transfer to the surrounding air
• Surface Finish: Polished outer rim for reduced brake dust and improved pad contact
• Compatibility: Designed for rear axle mounting on a wide range of Hyundai, Kia, and other OEM vehicles (see compatibility section)

Design Features & Performance Benefits

The ABS 18280 disc incorporates several engineering features that enhance braking performance:

• Full‑filled bore: Eliminates internal voids, reducing the risk of vibration and ensuring uniform load distribution.
• Optimized ribbing pattern: Provides a balance between structural rigidity and weight reduction while improving airflow for cooling.
• Polished rim: Minimizes brake dust accumulation and improves pad wear characteristics, extending the life of both disc and pads.
• Heat‑resistant alloy composition: Maintains mechanical integrity at high temperatures, preventing warping or cracking during heavy braking.

Vehicle Compatibility

The ABS 18280 brake disc is engineered to fit a broad spectrum of rear‑axle vehicles. Below are the primary models and years for which this component is an exact match:

• Hyundai Sonata (VI, VII) – 2005–2019
• Hyundai Elantra (IV, V, VI, VII) – 2005–2019
• Hyundai Avante/Elantra IV – 2005–2019
• Kia Optima / K5 – 2005–2019 (selected models)
• Other OEMs: Compatible with vehicles that share the same rear axle architecture and mounting specifications as the above models.

For precise fitment, always verify the vehicle’s model year, trim level, and specific brake system configuration before installation. The disc’s bore diameter of 114.3 mm and rim thickness of 10 mm are standard across these platforms, ensuring a seamless integration with existing calipers and mounting hardware.

Installation Guide

Installing the ABS 18280 brake disc is straightforward for technicians familiar with rear brake systems. Follow these steps to ensure optimal performance:

1. Safety First: Secure the vehicle on a jack stand and remove the wheel.
2. Remove Existing Disc: Loosen the caliper bolts, slide the caliper away, and detach the old disc. Clean the hub surface with brake cleaner.
3. Mount New Disc: Align the disc’s mounting holes with the hub studs. Insert the stud pins if applicable.
4. Tighten Bolts: Use a torque wrench to tighten the mounting bolts to the manufacturer’s specified value (typically 80–90 Nm).
5. Reinstall Caliper: Place the caliper back over the new disc, ensuring proper alignment of the piston.
6. Check Brake Fluid: Verify fluid levels and inspect for leaks. Bleed the brake system if necessary.
7. Test Drive: Perform a low‑speed test to confirm smooth braking response before resuming normal driving conditions.

Maintenance & Longevity Tips

• Inspect the disc surface for scoring or glazing every 10,000 km (6,200 mi).
• Avoid prolonged hard braking without deceleration to prevent excessive heat buildup.
• Use compatible brake pads that match the disc’s thickness and material properties.
• Store the vehicle in a dry environment to reduce corrosion risk on the disc surface.

Why Choose ABS 18280?

The ABS 18280 brake disc offers:

• Consistent Stopping Power: Engineered for reliable performance across a range of driving conditions.
• Durability: High‑strength alloy resists wear and heat fatigue.
• Ease of Installation: Standard mounting dimensions simplify replacement.
• Compatibility: Fits multiple Hyundai and Kia models, making it a versatile choice for fleet or individual vehicle owners.

Conclusion

The ABS 18280 Brake Disc is a premium component that delivers exceptional braking performance, reliability, and longevity. Its precise engineering, robust material composition, and broad compatibility make it an ideal choice for anyone seeking to maintain or upgrade the rear braking system of compatible Hyundai, Kia, or similar vehicles.